We use the TS_USE_CACHED_NETMAP knob to condition loading a cached netmap, but
were hitherto writing the map out to disk even when it was disabled. Let's not
do that; the two should travel together.
Updates #12639
Change-Id: Iee5aa828e2c59937d5b95093ea1ac26c9536721e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
When an exit node has been set and a new default route is added,
create a new rtable in the default rdomain and add the current
default route via its physical interface. When control() is
requesting a connection not go through the exit-node default route,
we can use the SO_RTABLE socket option to force it through the new
rtable we created.
Updates #17321
Signed-off-by: joshua stein <jcs@jcs.org>
Add PacketMatch hooks to the packet filter, allowing extensions to
customize filtering decisions:
- IngressAllowHooks: checked in RunIn after pre() but before the
standard runIn4/runIn6 match rules. Hooks can accept packets to
destinations outside the local IP set. First match wins; the
returned why string is used for logging.
- LinkLocalAllowHooks: checked inside pre() for both ingress and
egress, providing exceptions to the default policy of dropping
link-local unicast packets. First match wins. The GCP DNS address
(169.254.169.254) is always allowed regardless of hooks.
PacketMatch returns (match bool, why string) to provide a log reason
consistent with the existing filter functions.
Hooks are registered via the new FilterHooks struct in ipnext.Hooks
and wired through to filter.Filter in LocalBackend.updateFilterLocked.
Fixestailscale/corp#35989Fixestailscale/corp#37207
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
Stop stripping the "*." prefix from wildcard domains when used
as storage keys. Instead, replace "*" with "wildcard_" only at
the filesystem boundary in certFile and keyFile. This prevents
wildcard and non-wildcard certs from colliding in storage.
Updates #1196
Updates #7081
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In PR #18681, we started logging which exit nodes were being
suggested. However, we did not log if there were errors encountered.
This patch corrects this oversight.
Updates: tailscale/corp#29964
Updates: tailscale/corp#36446
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Store packet filter rules in the cache. The match expressions are derived
from the filter rules, so these do not need to be stored explicitly, but ensure
they are properly reconstructed when the cache is read back.
Update the tests to include these fields, and provide representative values.
Updates #12639
Change-Id: I9bdb972a86d2c6387177d393ada1f54805a2448b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
When traffic steering is enabled, some users are suggested an exit
node that is inappropriately far from their location. This seems to
happen right when the client connects to the control plane and the
client eventually fixes itself. But whenever an affected client
reconnects, its suggested exit node flaps, and this happens often
enough to be noticeable because connections drop whenever the exit
node is switched. This should not happen, since the map response that
contains the list of suggested exit nodes that the client picks from,
also contains the scores for those nodes.
Since our current logging and diagnostic tools don’t give us enough
insight into what is happening, this PR adds additional logging when:
- traffic steering scores are used to suggest an exit node
- an exit node is suggested, no matter how it was determined
Updates: tailscale/corp#29964
Updates: tailscale/corp#36446
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Restore synchronous method calls from LocalBackend to magicsock.Conn
for node views, filter, and delta mutations. The eventbus delivery
introduced in 8e6f63cf1 was invalid for these updates because
subsequent operations in the same call chain depend on magicsock
already having the current state. The Synchronize/settleEventBus
workaround was fragile and kept requiring more workarounds and
introducing new mystery bugs.
Since eventbus was added, we've since learned more about when to use
eventbus, and this wasn't one of the cases.
We can take another swing at using eventbus for netmap changes in a
future change.
Fixes#16369
Updates #18575 (likely fixes)
Change-Id: I79057cc9259993368bb1e350ff0e073adf6b9a8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
fixestailscale/tailscale#18436
Queries can still make their way to the forwarder when accept-dns is disabled.
Since we have not configured the forwarder if --accept-dns is false, this errors out
(correctly) but it also generates a persistent health warning. This forwards the
Pref setting all the way through the stack to the forwarder so that we can be more
judicious about when we decide that the forward path is unintentionally missing, vs
simply not configured.
Testing:
tailscale set --accept-dns=false. (or from the GUI)
dig @100.100.100.100 example.com
tailscale status
No dns related health warnings should be surfaced.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This commit adds a bool named PeerRelay to Hostinfo, to identify the host's status of acting as a peer relay.
Considering the RelayServerPort number can be 0, I just made this a bool in stead of a port number. If the port
info is needed in future this would also help indicating if the port was set to 0 (meaning any port in peer relay
context).
Updates tailscale/corp#35862
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Under extremely high load it appears we may have some retention issues
as a result of queue depth build up, but there is currently no direct
way to observe this. The scenario does not trigger the slow subscriber
log message, and the event stream debugging endpoint produces a
saturating volume of information.
Updates tailscale/corp#36904
Signed-off-by: James Tucker <james@tailscale.com>
If any profiles exist and an Authkey is provided via syspolicy, the
AuthKey is ignored on backend start, preventing re-auth attempts. This
is useful for one-time device provisioning scenarios, skipping authKey
use after initial setup when the authKey may no longer be valid.
updates #18618
Signed-off-by: Will Hannah <willh@tailscale.com>
When the NodeAttrDNSSubdomainResolve capability is present, enable
wildcard certificate issuance to cover all single-level subdomains
of a node's CertDomain.
Without the capability, only exact CertDomain matches are allowed,
so node.ts.net yields a cert for node.ts.net. With the capability,
we now generate wildcard certificates. Wildcard certs include both
the wildcard and base domain in their SANs, and ACME authorization
requests both identifiers. The cert filenames are kept still based
on the base domain with the wildcard prefix stripped, so we aren't
creating separate files. DNS challenges still used the base domain
The checkCertDomain function is replaced by resolveCertDomain that
both validates and returns the appropriate cert domain to request.
Name validation is now moved earlier into GetCertPEMWithValidity()
Fixes#1196
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
Found by @cmol. When rewriting the same value into the cache, we were dropping
the unchanged keys, resulting in the cache being pruned incorrectly.
Also update the tests to catch this.
Updates #12639
Change-Id: Iab67e444eb7ddc22ccc680baa2f6a741a00eb325
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
* wgengine/netstack: add local tailscale service IPs to route and terminate locally
This commit adds the tailscales service IPs served locally to OS routes, and
make interception to packets so that the traffic terminates locally without
making affects to the HA traffics.
Fixestailscale/corp#34048
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add ready field to avoid accessing lb before netstack starts
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* wgengine/netstack: store values from lb to avoid acquiring a lock
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add active services to netstack on starts with stored prefs.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* update comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This adds a new node capability 'dns-subdomain-resolve' that signals
that all of hosts' subdomains should resolve to the same IP address.
It allows wildcard matching on any node marked with this capability.
This change also includes an util/dnsname utility function that lets
us access the parent of a full qualified domain name. MagicDNS takes
this function and recursively searchs for a matching real node name.
One important thing to observe is that, in this context, a subdomain
can have multiple sub labels. This means that for a given node named
machine, both my.machine and be.my.machine will be a positive match.
Updates #1196
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
The file-based cache implementation was not reporting the correct error when
attempting to load a missing column key. Make it do so, and update the tests to
cover that case.
Updates #12639
Change-Id: Ie2c45a0a7e528d4125f857859c92df807116a56e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
The Tailscale CLI has some methods to watch the IPN bus for
messages, say, the current netmap (`tailscale debug netmap`).
The Tailscale daemon supports this using a streaming HTTP
response. Sometimes, the client can close its connection
abruptly -- due to an interruption, or in the case of `debug netmap`,
intentionally after consuming one message.
If the server daemon is writing a response as the client closes
its end of the socket, the daemon typically encounters a "broken pipe"
error. The "Watch IPN Bus" handler currently logs such errors after
they're propagated by a JSON encoding/writer helper.
Since the Tailscale CLI nominally closes its socket with the daemon
in this slightly ungraceful way (viz. `debug netmap`), stop logging
these broken pipe errors as far as possible. This will help avoid
confounding users when they scan backend logs.
Updates #18477
Signed-off-by: Amal Bansode <amal@tailscale.com>
This commit is based on part of #17925, reworked as a separate package.
Add a package that can store and load netmap.NetworkMap values in persistent
storage, using a basic columnar representation. This commit includes a default
storage interface based on plain files, but the interface can be implemented
with more structured storage if we want to later.
The tests are set up to require that all the fields of the NetworkMap are
handled, except those explicitly designated as not-cached, and check that a
fully-populated value can round-trip correctly through the cache. Adding or
removing fields, either in the NetworkMap or in the cached representation, will
trigger either build failures (e.g., for type mismatch) or test failures (e.g.,
for representation changes or missing fields). This isn't quite as nice as
automatically updating the representation, which I also prototyped, but is much
simpler to maintain and less code.
This commit does not yet hook up the cache to the backend, that will be a
subsequent change.
Updates #12639
Change-Id: Icb48639e1d61f2aec59904ecd172c73e05ba7bf9
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
If conn25 config is sent in the netmap: add split DNS entries to use
appropriately tagged peers' PeerAPI to resolve DNS requests for those
domains.
This will enable future work where we use the peers as connectors for
the configured domains.
Updates tailscale/corp#34252
Signed-off-by: Fran Bull <fran@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
In order to better manage per-profile data resources on the client, add methods
to the LocalBackend to support creation of per-profile directory structures in
local storage. These methods build on the existing TailscaleVarRoot config, and
have the same limitation (i.e., if no local storage is available, it will
report an error when used).
The immediate motivation is to support netmap caching, but we can also use this
mechanism for other per-profile resources including pending taildrop files and
Tailnet Lock authority caches.
This commit only adds the directory-management plumbing; later commits will
handle migrating taildrop, TKA, etc. to this mechanism, as well as caching
network maps.
Updates #12639
Change-Id: Ia75741955c7bf885e49c1ad99f856f669a754169
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This change allows tsnet nodes to act as Service hosts by adding a new
function, tsnet.Server.ListenService. Invoking this function will
advertise the node as a host for the Service and create a listener to
receive traffic for the Service.
Fixes#17697Fixestailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
This change adds API to ipn.LocalBackend to retrieve the ETag when
querying for the current serve config. This allows consumers of
ipn.LocalBackend.SetServeConfig to utilize the concurrency control
offered by ETags. Previous to this change, utilizing serve config ETags
required copying the local backend's internal ETag calcuation.
The local API server was previously copying the local backend's ETag
calculation as described above. With this change, the local API server
now uses the new ETag retrieval function instead. Serve config ETags are
therefore now opaque to clients, in line with best practices.
Fixestailscale/corp#35857
Signed-off-by: Harry Harpham <harry@tailscale.com>
fixestailscale/tailscale#18418
Both Serve and PeerAPI broke when we moved the TailscaleInterfaceName
into State, which is updated asynchronously and may not be
available when we configure the listeners.
This extracts the explicit interface name property from netmon.State
and adds as a static struct with getters that have proper error
handling.
The bug is only found in sandboxed Darwin clients, where we
need to know the Tailscale interface details in order to set up the
listeners correctly (they must bind to our interface explicitly to escape
the network sandboxing that is applied by NECP).
Currently set only sandboxed macOS and Plan9 set this but it will
also be useful on Windows to simplify interface filtering in netns.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Fixes a bug where, for kube HA proxies, TLS certs for the replica
responsible for cert issuance where loaded in memory on startup,
although the in-memory store was not updated after renewal (to
avoid failing re-issuance for re-created Ingresses).
Now the 'write' replica always reads certs from the kube Secret.
Updates tailscale/tailscale#18394
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
Ensure that hardware attestation keys are not added to tailscaled
state stores that are Kubernetes Secrets or AWS SSM as those Tailscale
devices should be able to be recreated on different nodes, for example,
when moving Pods between nodes.
Updates tailscale/tailscale#18302
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
TPM-based features have been incredibly painful due to the heterogeneous
devices in the wild, and many situations in which the TPM "changes" (is
reset or replaced). All of this leads to a lot of customer issues.
We hoped to iron out all the kinks and get all users to benefit from
state encryption and hardware attestation without manually opting in,
but the long tail of kinks is just too long.
This change disables TPM-based features on Windows and Linux by default.
Node state should get auto-decrypted on update, and old attestation keys
will be removed.
There's also tailscaled-on-macOS, but it won't have a TPM or Keychain
bindings anyway.
Updates #18302
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Soft-fail on initial unmarshal and try again, ignoring the
AttestationKey. This helps in cases where something about the
attestation key storage (usually a TPM) is messed up. The old key will
be lost, but at least the node can start again.
Updates #18302
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
An error returned by net.Listener.Accept() causes the owning http.Server to shut down.
With the deprecation of net.Error.Temporary(), there's no way for the http.Server to test
whether the returned error is temporary / retryable or not (see golang/go#66252).
Because of that, errors returned by (*safesocket.winIOPipeListener).Accept() cause the LocalAPI
server (aka ipnserver.Server) to shut down, and tailscaled process to exit.
While this might be acceptable in the case of non-recoverable errors, such as programmer errors,
we shouldn't shut down the entire tailscaled process for client- or connection-specific errors,
such as when we couldn't obtain the client's access token because the client attempts to connect
at the Anonymous impersonation level. Instead, the LocalAPI server should gracefully handle
these errors by denying access and returning a 401 Unauthorized to the client.
In tailscale/tscert#15, we fixed a known bug where Caddy and other apps using tscert would attempt
to connect at the Anonymous impersonation level and fail. However, we should also fix this on the tailscaled
side to prevent a potential DoS, where a local app could deliberately open the Tailscale LocalAPI named pipe
at the Anonymous impersonation level and cause tailscaled to exit.
In this PR, we defer token retrieval until (*WindowsClientConn).Token() is called and propagate the returned token
or error via ipnauth.GetConnIdentity() to ipnserver, which handles it the same way as other ipnauth-related errors.
Fixes#18212Fixestailscale/tscert#13
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In dynamically changing environments where ACME account keys and certs
are stored separately, it can happen that the account key would get
deleted (and recreated) between issuances. If that is the case,
we currently fail renewals and the only way to recover is for users
to delete certs.
This adds a config knob to allow opting out of the replaces extension
and utilizes it in the Kubernetes operator where there are known
user workflows that could end up with this edge case.
Updates #18251
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
updates tailscale/corp#33891
Addresses several older the TODO's in netmon. This removes the
Major flag precomputes the ChangeDelta state, rather than making
consumers of ChangeDeltas sort that out themselves. We're also seeing
a lot of ChangeDelta's being flagged as "Major" when they are
not interesting, triggering rebinds in wgengine that are not needed. This
cleans that up and adds a host of additional tests.
The dependencies are cleaned, notably removing dependency on netmon
itself for calculating what is interesting, and what is not. This includes letting
individual platforms set a bespoke global "IsInterestingInterface"
function. This is only used on Darwin.
RebindRequired now roughly follows how "Major" was historically
calculated but includes some additional checks for various
uninteresting events such as changes in interface addresses that
shouldn't trigger a rebind. This significantly reduces thrashing (by
roughly half on Darwin clients which switching between nics). The individual
values that we roll into RebindRequired are also exposed so that
components consuming netmap.ChangeDelta can ask more
targeted questions.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
The existing client metric methods only support incrementing (or
decrementing) a delta value. This new method allows setting the metric
to a specific value.
Updates tailscale/corp#35327
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
tcpHandlerForVIPService was missing ProxyProtocol support that
tcpHandlerForServe already had. Extract the shared logic into
forwardTCPWithProxyProtocol helper and use it in both handlers.
Fixes#18172
Signed-off-by: Raj Singh <raj@tailscale.com>
It appears (*controlclient.Auto).Shutdown() can still deadlock when called with b.mu held, and therefore the changes in #18127 are unsafe.
This reverts #18127 until we figure out what causes it.
This reverts commit d199ecac80.
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously we only set this when it updated, which was fine for the first
call to Start(), but after that point future updates would be skipped if
nothing had changed. If Start() was called again, it would wipe the peer API
endpoints and they wouldn't get added back again, breaking exit nodes (and
anything else requiring peer API to be advertised).
Updates tailscale/corp#27173
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Based on PR #16700 by @lox, adapted to current codebase.
Adds support for proxying HTTP requests to Unix domain sockets via
tailscale serve unix:/path/to/socket, enabling exposure of services
like Docker, containerd, PHP-FPM over Tailscale without TCP bridging.
The implementation includes reasonable protections against exposure of
tailscaled's own socket.
Adaptations from original PR:
- Use net.Dialer.DialContext instead of net.Dial for context propagation
- Use http.Transport with Protocols API (current h2c approach, not http2.Transport)
- Resolve conflicts with hasScheme variable in ExpandProxyTargetValue
Updates #9771
Signed-off-by: Peter A. <ink.splatters@pm.me>
Co-authored-by: Lachlan Donald <lachlan@ljd.cc>
If a packet arrives while WireGuard is being reconfigured with b.mu held, such as during a profile switch,
calling back into (*LocalBackend).GetPeerAPIPort from (*Wrapper).filterPacketInboundFromWireGuard
may deadlock when it tries to acquire b.mu.
This occurs because a peer cannot be removed while an inbound packet is being processed.
The reconfig and profile switch wait for (*Peer).RoutineSequentialReceiver to return, but it never finishes
because GetPeerAPIPort needs b.mu, which the waiting goroutine already holds.
In this PR, we make peerAPIPorts a new syncs.AtomicValue field that is written with b.mu held
but can be read by GetPeerAPIPort without holding the mutex, which fixes the deadlock.
There might be other long-term ways to address the issue, such as moving peer API listeners
from LocalBackend to nodeBackend so they can be accessed without holding b.mu,
but these changes are too large and risky at this stage in the v1.92 release cycle.
Updates #18124
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously, callers of (*LocalBackend).resetControlClientLocked were supposed
to call Shutdown on the returned controlclient.Client after releasing b.mu.
In #17804, we started calling Shutdown while holding b.mu, which caused
deadlocks during profile switches due to the (*ExecQueue).RunSync implementation.
We first patched this in #18053 by calling Shutdown in a new goroutine,
which avoided the deadlocks but made TestStateMachine flaky because
the shutdown order was no longer guaranteed.
In #18070, we updated (*ExecQueue).RunSync to allow shutting down
the queue without waiting for RunSync to return. With that change,
shutting down the control client while holding b.mu became safe.
Therefore, this PR updates (*LocalBackend).resetControlClientLocked
to shut down the old client synchronously during the reset, instead of
returning it and shifting that responsibility to the callers.
This fixes the flaky tests and simplifies the code.
Fixes#18052
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This patch adds an integration test for Tailnet Lock, checking that a node can't
talk to peers in the tailnet until it becomes signed.
This patch also introduces a new package `tstest/tkatest`, which has some helpers
for constructing a mock control server that responds to TKA requests. This allows
us to reduce boilerplate in the IPN tests.
Updates tailscale/corp#33599
Signed-off-by: Alex Chan <alexc@tailscale.com>
In preparation for exposing its configuration via ipn.ConfigVAlpha,
change {Masked}Prefs.RelayServerPort from *int to *uint16. This takes a
defensive stance against invalid inputs at JSON decode time.
'tailscale set --relay-server-port' is currently the only input to this
pref, and has always sanitized input to fit within a uint16.
Updates tailscale/corp#34591
Signed-off-by: Jordan Whited <jordan@tailscale.com>
M. J. Fromberger
Mike O'Driscoll
joshua stein
Michael Ben-Ami
Fernando Serboncini
Will Norris
Simon Law
Brad Fitzpatrick
Jonathan Nobels
KevinLiang10
James Tucker
Will Hannah
Amal Bansode
Fran Bull
Harry Harpham
Tom Meadows
Irbe Krumina
Naman Sood
Andrew Lytvynov
Nick Khyl
Raj Singh
Alex Chan
Nick Khyl
James 'zofrex' Sanderson
Peter A.
Jordan Whited