I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This hook addition is motivated by the Connectors 2025 work, in which
NATed "Transit IPs" are used to route interesting traffic to the
appropriate peer, without advertising the actual real IPs.
It overlaps with #17858, and specifically with the WIP PR #17861.
If that work completes, this hook may be replaced by other ones
that fit the new WireGuard configuration paradigm.
Fixestailscale/corp#37146
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
We use the TS_USE_CACHED_NETMAP knob to condition loading a cached netmap, but
were hitherto writing the map out to disk even when it was disabled. Let's not
do that; the two should travel together.
Updates #12639
Change-Id: Iee5aa828e2c59937d5b95093ea1ac26c9536721e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
When an exit node has been set and a new default route is added,
create a new rtable in the default rdomain and add the current
default route via its physical interface. When control() is
requesting a connection not go through the exit-node default route,
we can use the SO_RTABLE socket option to force it through the new
rtable we created.
Updates #17321
Signed-off-by: joshua stein <jcs@jcs.org>
Add PacketMatch hooks to the packet filter, allowing extensions to
customize filtering decisions:
- IngressAllowHooks: checked in RunIn after pre() but before the
standard runIn4/runIn6 match rules. Hooks can accept packets to
destinations outside the local IP set. First match wins; the
returned why string is used for logging.
- LinkLocalAllowHooks: checked inside pre() for both ingress and
egress, providing exceptions to the default policy of dropping
link-local unicast packets. First match wins. The GCP DNS address
(169.254.169.254) is always allowed regardless of hooks.
PacketMatch returns (match bool, why string) to provide a log reason
consistent with the existing filter functions.
Hooks are registered via the new FilterHooks struct in ipnext.Hooks
and wired through to filter.Filter in LocalBackend.updateFilterLocked.
Fixestailscale/corp#35989Fixestailscale/corp#37207
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In PR #18681, we started logging which exit nodes were being
suggested. However, we did not log if there were errors encountered.
This patch corrects this oversight.
Updates: tailscale/corp#29964
Updates: tailscale/corp#36446
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When traffic steering is enabled, some users are suggested an exit
node that is inappropriately far from their location. This seems to
happen right when the client connects to the control plane and the
client eventually fixes itself. But whenever an affected client
reconnects, its suggested exit node flaps, and this happens often
enough to be noticeable because connections drop whenever the exit
node is switched. This should not happen, since the map response that
contains the list of suggested exit nodes that the client picks from,
also contains the scores for those nodes.
Since our current logging and diagnostic tools don’t give us enough
insight into what is happening, this PR adds additional logging when:
- traffic steering scores are used to suggest an exit node
- an exit node is suggested, no matter how it was determined
Updates: tailscale/corp#29964
Updates: tailscale/corp#36446
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Restore synchronous method calls from LocalBackend to magicsock.Conn
for node views, filter, and delta mutations. The eventbus delivery
introduced in 8e6f63cf1 was invalid for these updates because
subsequent operations in the same call chain depend on magicsock
already having the current state. The Synchronize/settleEventBus
workaround was fragile and kept requiring more workarounds and
introducing new mystery bugs.
Since eventbus was added, we've since learned more about when to use
eventbus, and this wasn't one of the cases.
We can take another swing at using eventbus for netmap changes in a
future change.
Fixes#16369
Updates #18575 (likely fixes)
Change-Id: I79057cc9259993368bb1e350ff0e073adf6b9a8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a bool named PeerRelay to Hostinfo, to identify the host's status of acting as a peer relay.
Considering the RelayServerPort number can be 0, I just made this a bool in stead of a port number. If the port
info is needed in future this would also help indicating if the port was set to 0 (meaning any port in peer relay
context).
Updates tailscale/corp#35862
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
If any profiles exist and an Authkey is provided via syspolicy, the
AuthKey is ignored on backend start, preventing re-auth attempts. This
is useful for one-time device provisioning scenarios, skipping authKey
use after initial setup when the authKey may no longer be valid.
updates #18618
Signed-off-by: Will Hannah <willh@tailscale.com>
* wgengine/netstack: add local tailscale service IPs to route and terminate locally
This commit adds the tailscales service IPs served locally to OS routes, and
make interception to packets so that the traffic terminates locally without
making affects to the HA traffics.
Fixestailscale/corp#34048
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add ready field to avoid accessing lb before netstack starts
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* wgengine/netstack: store values from lb to avoid acquiring a lock
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add active services to netstack on starts with stored prefs.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* update comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
In order to better manage per-profile data resources on the client, add methods
to the LocalBackend to support creation of per-profile directory structures in
local storage. These methods build on the existing TailscaleVarRoot config, and
have the same limitation (i.e., if no local storage is available, it will
report an error when used).
The immediate motivation is to support netmap caching, but we can also use this
mechanism for other per-profile resources including pending taildrop files and
Tailnet Lock authority caches.
This commit only adds the directory-management plumbing; later commits will
handle migrating taildrop, TKA, etc. to this mechanism, as well as caching
network maps.
Updates #12639
Change-Id: Ia75741955c7bf885e49c1ad99f856f669a754169
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This change allows tsnet nodes to act as Service hosts by adding a new
function, tsnet.Server.ListenService. Invoking this function will
advertise the node as a host for the Service and create a listener to
receive traffic for the Service.
Fixes#17697Fixestailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
fixestailscale/tailscale#18418
Both Serve and PeerAPI broke when we moved the TailscaleInterfaceName
into State, which is updated asynchronously and may not be
available when we configure the listeners.
This extracts the explicit interface name property from netmon.State
and adds as a static struct with getters that have proper error
handling.
The bug is only found in sandboxed Darwin clients, where we
need to know the Tailscale interface details in order to set up the
listeners correctly (they must bind to our interface explicitly to escape
the network sandboxing that is applied by NECP).
Currently set only sandboxed macOS and Plan9 set this but it will
also be useful on Windows to simplify interface filtering in netns.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
TPM-based features have been incredibly painful due to the heterogeneous
devices in the wild, and many situations in which the TPM "changes" (is
reset or replaced). All of this leads to a lot of customer issues.
We hoped to iron out all the kinks and get all users to benefit from
state encryption and hardware attestation without manually opting in,
but the long tail of kinks is just too long.
This change disables TPM-based features on Windows and Linux by default.
Node state should get auto-decrypted on update, and old attestation keys
will be removed.
There's also tailscaled-on-macOS, but it won't have a TPM or Keychain
bindings anyway.
Updates #18302
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
updates tailscale/corp#33891
Addresses several older the TODO's in netmon. This removes the
Major flag precomputes the ChangeDelta state, rather than making
consumers of ChangeDeltas sort that out themselves. We're also seeing
a lot of ChangeDelta's being flagged as "Major" when they are
not interesting, triggering rebinds in wgengine that are not needed. This
cleans that up and adds a host of additional tests.
The dependencies are cleaned, notably removing dependency on netmon
itself for calculating what is interesting, and what is not. This includes letting
individual platforms set a bespoke global "IsInterestingInterface"
function. This is only used on Darwin.
RebindRequired now roughly follows how "Major" was historically
calculated but includes some additional checks for various
uninteresting events such as changes in interface addresses that
shouldn't trigger a rebind. This significantly reduces thrashing (by
roughly half on Darwin clients which switching between nics). The individual
values that we roll into RebindRequired are also exposed so that
components consuming netmap.ChangeDelta can ask more
targeted questions.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
It appears (*controlclient.Auto).Shutdown() can still deadlock when called with b.mu held, and therefore the changes in #18127 are unsafe.
This reverts #18127 until we figure out what causes it.
This reverts commit d199ecac80.
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously we only set this when it updated, which was fine for the first
call to Start(), but after that point future updates would be skipped if
nothing had changed. If Start() was called again, it would wipe the peer API
endpoints and they wouldn't get added back again, breaking exit nodes (and
anything else requiring peer API to be advertised).
Updates tailscale/corp#27173
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
If a packet arrives while WireGuard is being reconfigured with b.mu held, such as during a profile switch,
calling back into (*LocalBackend).GetPeerAPIPort from (*Wrapper).filterPacketInboundFromWireGuard
may deadlock when it tries to acquire b.mu.
This occurs because a peer cannot be removed while an inbound packet is being processed.
The reconfig and profile switch wait for (*Peer).RoutineSequentialReceiver to return, but it never finishes
because GetPeerAPIPort needs b.mu, which the waiting goroutine already holds.
In this PR, we make peerAPIPorts a new syncs.AtomicValue field that is written with b.mu held
but can be read by GetPeerAPIPort without holding the mutex, which fixes the deadlock.
There might be other long-term ways to address the issue, such as moving peer API listeners
from LocalBackend to nodeBackend so they can be accessed without holding b.mu,
but these changes are too large and risky at this stage in the v1.92 release cycle.
Updates #18124
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously, callers of (*LocalBackend).resetControlClientLocked were supposed
to call Shutdown on the returned controlclient.Client after releasing b.mu.
In #17804, we started calling Shutdown while holding b.mu, which caused
deadlocks during profile switches due to the (*ExecQueue).RunSync implementation.
We first patched this in #18053 by calling Shutdown in a new goroutine,
which avoided the deadlocks but made TestStateMachine flaky because
the shutdown order was no longer guaranteed.
In #18070, we updated (*ExecQueue).RunSync to allow shutting down
the queue without waiting for RunSync to return. With that change,
shutting down the control client while holding b.mu became safe.
Therefore, this PR updates (*LocalBackend).resetControlClientLocked
to shut down the old client synchronously during the reset, instead of
returning it and shifting that responsibility to the callers.
This fixes the flaky tests and simplifies the code.
Fixes#18052
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In suggestExitNodeLocked, if no exit node candidates have a home DERP or
valid location info, `bestCandidates` is an empty slice. This slice is
passed to `selectNode` (`randomNode` in prod):
```go func randomNode(nodes views.Slice[tailcfg.NodeView], …) tailcfg.NodeView {
…
return nodes.At(rand.IntN(nodes.Len()))
}
```
An empty slice becomes a call to `rand.IntN(0)`, which panics.
This patch changes the behaviour, so if we've filtered out all the
candidates before calling `selectNode`, reset the list and then pick
from any of the available candidates.
This patch also updates our tests to give us more coverage of `randomNode`,
so we can spot other potential issues.
Updates #17661
Change-Id: I63eb5e4494d45a1df5b1f4b1b5c6d5576322aa72
Signed-off-by: Alex Chan <alexc@tailscale.com>
In PR tailscale/corp#34401, the `traffic-steering` feature flag does
not automatically enable traffic steering for all nodes. Instead, an
admin must add the `traffic-steering` node attribute to each client
node that they want opted-in.
For backwards compatibility with older clients, tailscale/corp#34401
strips out the `traffic-steering` node attribute if the feature flag
is not enabled, even if it is set in the policy file. This lets us
safely disable the feature flag.
This PR adds a missing test case for suggested exit nodes that have no
priority.
Updates tailscale/corp#34399
Signed-off-by: Simon Law <sfllaw@tailscale.com>
With the introduction of node sealing, store.New fails in some cases due
to the TPM device being reset or unavailable. Currently it results in
tailscaled crashing at startup, which is not obvious to the user until
they check the logs.
Instead of crashing tailscaled at startup, start with an in-memory store
with a health warning about state initialization and a link to (future)
docs on what to do. When this health message is set, also block any
login attempts to avoid masking the problem with an ephemeral node
registration.
Updates #15830
Updates #17654
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adds the ability to rotate discovery keys on running clients, needed for
testing upcoming disco key distribution changes.
Introduces key.DiscoKey, an atomic container for a disco private key,
public key, and the public key's ShortString, replacing the prior
separate atomic fields.
magicsock.Conn has a new RotateDiscoKey method, and access to this is
provided via localapi and a CLI debug command.
Note that this implementation is primarily for testing as it stands, and
regular use should likely introduce an additional mechanism that allows
the old key to be used for some time, to provide a seamless key rotation
rather than one that invalidates all sessions.
Updates tailscale/corp#34037
Signed-off-by: James Tucker <james@tailscale.com>
For manual (human) testing, this lets the user disable control plane
map polls with "tailscale set --sync=false" (which survives restarts)
and "tailscale set --sync" to restore.
A high severity health warning is shown while this is active.
Updates #12639
Updates #17945
Change-Id: I83668fa5de3b5e5e25444df0815ec2a859153a6d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Remove the State enum (StateNew, StateNotAuthenticated, etc.) from
controlclient and replace it with two explicit boolean fields:
- LoginFinished: indicates successful authentication
- Synced: indicates we've received at least one netmap
This makes the state more composable and easier to reason about, as
multiple conditions can be true independently rather than being
encoded in a single enum value.
The State enum was originally intended as the state machine for the
whole client, but that abstraction moved to ipn.Backend long ago.
This change continues moving away from the legacy state machine by
representing state as a combination of independent facts.
Also adds test helpers in ipnlocal that check independent, observable
facts (hasValidNetMap, needsLogin, etc.) rather than relying on
derived state enums, making tests more robust.
Updates #12639
Signed-off-by: James Tucker <james@tailscale.com>
updates tailscale/corp#31571
It appears that on the latest macOS, iOS and tVOS versions, the work
that netns is doing to bind outgoing connections to the default interface (and all
of the trimmings and workarounds in netmon et al that make that work) are
not needed. The kernel is extension-aware and doing nothing, is the right
thing. This is, however, not the case for tailscaled (which is not a
special process).
To allow us to test this assertion (and where it might break things), we add a
new node cap that turns this behaviour off only for network-extension equipped clients,
making it possible to turn this off tailnet-wide, without breaking any tailscaled
macos nodes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
When systemd notification support was omitted from the build, or on
non-Linux systems, we were unnecessarily emitting code and generating
garbage stringifying addresses upon transition to the Running state.
Updates #12614
Change-Id: If713f47351c7922bb70e9da85bf92725b25954b9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* lock released early just to call `b.send` when it can call
`b.sendToLocked` instead
* `UnlockEarly` called to release the lock before trivially fast
operations, we can wait for a defer there
Updates #11649
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
A follow-up to #17411. Put AppConnector events into a task queue, as they may
take some time to process. Ensure that the queue is stopped at shutdown so that
cleanup will remain orderly.
Because events are delivered on a separate goroutine, slow processing of an
event does not cause an immediate problem; however, a subscriber that blocks
for a long time will push back on the bus as a whole. See
https://godoc.org/tailscale.com/util/eventbus#hdr-Expected_subscriber_behavior
for more discussion.
Updates #17192
Updates #15160
Change-Id: Ib313cc68aec273daf2b1ad79538266c81ef063e3
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Temporarily back out the TPM-based hw attestation code while we debug
Windows exceptions.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
This does not change which subscriptions are made, it only swaps them to use
the SubscribeFunc API instead of Subscribe.
Updates #15160
Updates #17487
Change-Id: Id56027836c96942206200567a118f8bcf9c07f64
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Brad Fitzpatrick
Michael Ben-Ami
M. J. Fromberger
Mike O'Driscoll
joshua stein
Will Norris
Simon Law
KevinLiang10
Will Hannah
Harry Harpham
Jonathan Nobels
Tom Meadows
Andrew Lytvynov
Nick Khyl
James 'zofrex' Sanderson
Nick Khyl
Alex Chan
James Tucker
Patrick O'Doherty