In this PR we add syspolicy/rsop package that facilitates policy source registration
and provides access to the resultant policy merged from all registered sources for a
given scope.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
For a customer that wants to run their own DERP prober, let's add a
/healthz endpoint that can be used to monitor derpprobe itself.
Updates #6526
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Iba315c999fc0b1a93d8c503c07cc733b4c8d5b6b
Our existing container-detection tricks did not work on Kubernetes,
where Docker is no longer used as a container runtime. Extends the
existing go build tags for containers to the other container packages
and uses that to reliably detect builds that were created by Tailscale
for use in a container. Unfortunately this doesn't necessarily improve
detection for users' custom builds, but that's a separate issue.
Updates #13825
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
connstats currently increments the packet counter whenever it is called
to store a length of data, however when udp batch sending was introduced
we pass the length for a series of packages, and it is only incremented
ones, making it count wrongly if we are on a platform supporting udp
batches.
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This allows passing through any environment variables that we set ourselves, for example DBUS_SESSION_BUS_ADDRESS.
Updates #11175
Co-authored-by: Mario Minardi <mario@tailscale.com>
Signed-off-by: Percy Wegmann <percy@tailscale.com>
The bools.Compare function compares boolean values
by reporting -1, 0, +1 for ordering so that it can be easily
used with slices.SortFunc.
Updates #cleanup
Updates tailscale/corp#11038
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If multiple upstream DNS servers are available, quad-100 sends requests to all of them
and forwards the first successful response, if any. If no successful responses are received,
it propagates the first failure from any of them.
This PR adds some test coverage for these scenarios.
Updates #13571
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We currently have two executions paths where (*forwarder).forwardWithDestChan
returns nil, rather than an error, without sending a DNS response to responseChan.
These paths are accompanied by a comment that reads:
// Returning an error will cause an internal retry, there is
// nothing we can do if parsing failed. Just drop the packet.
But it is not (or no longer longer) accurate: returning an error from forwardWithDestChan
does not currently cause a retry.
Moreover, although these paths are currently unreachable due to implementation details,
if (*forwarder).forwardWithDestChan were to return nil without sending a response to
responseChan, it would cause a deadlock at one call site and a panic at another.
Therefore, we update (*forwarder).forwardWithDestChan to return errors in those two paths
and remove comments that were no longer accurate and misleading.
Updates #cleanup
Updates #13571
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
If a DoH server returns an HTTP server error, rather than a SERVFAIL within
a successful HTTP response, we should handle it in the same way as SERVFAIL.
Updates #13571
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
As per the docstring, (*forwarder).forwardWithDestChan should either send to responseChan
and returns nil, or returns a non-nil error (without sending to the channel).
However, this does not hold when all upstream DNS servers replied with an error.
We've been handling this special error path in (*Resolver).Query but not in (*Resolver).HandlePeerDNSQuery.
As a result, SERVFAIL responses from upstream servers were being converted into HTTP 503 responses,
instead of being properly forwarded as SERVFAIL within a successful HTTP response, as per RFC 8484, section 4.2.1:
A successful HTTP response with a 2xx status code (see Section 6.3 of [RFC7231]) is used for any valid DNS response,
regardless of the DNS response code. For example, a successful 2xx HTTP status code is used even with a DNS message
whose DNS response code indicates failure, such as SERVFAIL or NXDOMAIN.
In this PR we fix (*forwarder).forwardWithDestChan to no longer return an error when it sends a response to responseChan,
and remove the special handling in (*Resolver).Query, as it is no longer necessary.
Updates #13571
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
This helps better distinguish what is generating activity to the
Tailscale public API.
Updates tailscale/corp#23838
Signed-off-by: Percy Wegmann <percy@tailscale.com>
No need to prefix this with 'Tailscale' for tailscale.com
custom resource types.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were using google/uuid in two places and that brought in database/sql/driver.
We didn't need it in either place.
Updates #13760
Updates tailscale/corp#20099
Change-Id: Ieed32f1bebe35d35f47ec5a2a429268f24f11f1f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There's never a tailscaled on iOS. And we can't run child processes to
look for it anyway.
Updates tailscale/corp#20099
Change-Id: Ieb3776f4bb440c4f1c442fdd169bacbe17f23ddb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We probably shouldn't link it in anywhere, but let's fix iOS for now.
Updates #13762
Updates tailscale/corp#20099
Change-Id: Idac116e9340434334c256acba3866f02bd19827c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
One primary purpose of WithLock is to mutate the underlying map.
However, this can lead to a panic if it happens to be nil.
Thus, always allocate a map before passing it to f.
Updates tailscale/corp#11038
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Thus new function allows constructing vizerrors that combine a message
appropriate for display to users with a wrapped underlying error.
Updates tailscale/corp#23781
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Add Keys, Values, and All to iterate over
all keys, values, and entries, respectively.
Updates #11038
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
cmd/k8s-operator,k8s-operator/apis: set a readiness condition on egress Services
Set a readiness condition on ExternalName Services that define a tailnet target
to route cluster traffic to via a ProxyGroup's proxies. The condition
is set to true if at least one proxy is currently set up to route.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Their callers using Range are all kinda clunky feeling. Iterators
should make them more readable.
Updates #12912
Change-Id: I93461eba8e735276fda4a8558a4ae4bfd6c04922
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We don't need to error out and continuously reconcile if ProxyClass
has not (yet) been created, once it gets created the ProxyGroup
reconciler will get triggered.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Ensure that .status.podIPs is used to select Pod's IP
in all reconcilers.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
As discussed in #13684, base the ProxyGroup's proxy definitions on the same
scaffolding as the existing proxies, as defined in proxy.yaml
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Instead of converting our PortMap struct to a string during marshalling
for use as a key, convert the whole collection of PortMaps to a list of
PortMap objects, which improves the readability of the JSON config while
still keeping the data structure we need in the code.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Currently egress Services for ProxyGroup only work for Pods and Services
with IPv4 addresses. Ensure that it works on dual stack clusters by reading
proxy Pod's IP from the .status.podIPs list that always contains both
IPv4 and IPv6 address (if the Pod has them) rather than .status.podIP that
could contain IPv6 only for a dual stack cluster.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The default ProxyClass can be set via helm chart or env var, and applies
to all proxies that do not otherwise have an explicit ProxyClass set.
This ensures proxies created by the new ProxyGroup CRD are consistent
with the behaviour of existing proxies
Nearby but unrelated changes:
* Fix up double error logs (controller runtime logs returned errors)
* Fix a couple of variable names
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Rearrange conditionals to reduce indentation and make it a bit easier to read
the logic. Also makes some error message updates for better consistency
with the recent decision around capitalising resource names and the
upcoming addition of config secrets.
Updates #cleanup
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
It is sometimes necessary to defer initialization steps until the first actual usage
or until certain prerequisites have been met. For example, policy setting and
policy source registration should not occur during package initialization.
Instead, they should be deferred until the syspolicy package is actually used.
Additionally, any errors should be properly handled and reported, rather than
causing a panic within the package's init function.
In this PR, we add DeferredInit, to facilitate the registration and invocation
of deferred initialization functions.
Updates #12687
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
To avoid warning:
find: warning: you have specified the global option -maxdepth after the argument -type, but global options are not positional, i.e., -maxdepth affects tests specified before it as well as those specified after it. Please specify global options before other arguments.
Fixestailscale/corp#23689
Change-Id: I91ee260b295c552c0a029883d5e406733e081478
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Nick Khyl
Andrew Dunham
Tom Proctor
License Updater
Kristoffer Dalby
Paul Scott
Percy Wegmann
Joe Tsai
Nick Hill
Jordan Whited
Jonathan Nobels
Brad Fitzpatrick
Irbe Krumina
dependabot[bot]
Erisa A