This change allows for the release/dist/qnap package to be used
outside of the tailscale repo (notably, will be used from corp),
by using an embedded file system for build files which gets
temporarily written to a new folder during qnap build runs.
Without this change, when used from corp, the release/dist/qnap
folder will fail to be found within the corp repo, causing
various steps of the build to fail.
The file renames in this change are to combine the build files
into a /files folder, separated into /scripts and /Tailscale.
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Creates new QNAP builder target, which builds go binaries then uses
docker to build into QNAP packages. Much of the docker/script code
here is pulled over from https://github.com/tailscale/tailscale-qpkg,
with adaptation into our builder structures.
The qnap/Tailscale folder contains static resources needed to build
Tailscale qpkg packages, and is an exact copy of the existing folder
in the tailscale-qpkg repo.
Builds can be run with:
```
sudo ./tool/go run ./cmd/dist build qnap
```
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Synology requires version numbers are within int32 range. This
change updates the version logic to keep things closer within the
range, and errors on building when the range is exceeded.
Updates #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Moving logic that manipulates a ServeConfig into recievers on the
ServeConfig in the ipn package. This is setup work to allow the
web client and cli to both utilize these shared functions to edit
the serve config.
Any logic specific to flag parsing or validation is left untouched
in the cli command. The web client will similarly manage its
validation of user's requested changes. If validation logic becomes
similar-enough, we can make a serve util for shared functionality,
which likely does not make sense in ipn.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
In preparation for changes to allow configuration of serve/funnel
from the web client, this commit moves some functionality that will
be shared between the CLI and web client to the ipn package's
serve.go file, where some other util funcs are already defined.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Starts using peer capabilities to restrict the management client
on a per-view basis. This change also includes a bulky cleanup
of the login-toggle.tsx file, which was getting pretty unwieldy
in its previous form.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This change adds a new apiHandler struct for use from serveAPI
to aid with restricting endpoints to specific peer capabilities.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Update logs for synology builds to more clearly callout which variant
is being built. The two existing variants are:
1. Sideloaded (can be manual installed on a device by anyone)
2. Package center distribution (by the tailscale team)
Updates #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Sets up peer capability types for future use within the web client
views and APIs.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Prints a helpful message with the web UI's address when running
tailscale set --webclient.
Updates tailscale/corp#16345
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
For consistency w/ the CLI command. And to be more accurate to what
is actually happening on this action - node key is expired.
Also updates the disconnected view shown after logout.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Throughout the web UI, we present the tailscale addresses for the
self node. In the case of the node being shared out with a user
from another tailnet, the peer viewer may actually know the node
by a different IP than the node knows itself as (Tailscale IPs
can be configured as desired on a tailnet level). This change
includes two fixes:
1. Present the self node's addresses in the frontend as the addresses
the viewing node knows it as (i.e. the addresses the viewing node
uses to access the web client).
2. We currently redirect the viewer to the Tailscale IPv4 address if
viewing it by MagicDNS name, or any other name that maps to the
Tailscale node. When doing this redirect, which is primarily added
for DNS rebinding protection, we now check the address the peer
knows this node as, and redirect to specifically that IP.
Fixestailscale/corp#16402
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
To be safe, use `prefs.ControlURLOrDefault()` rather than the current
`prefs.ControlURL` directly.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Completed testing of the new UI on the existing platforms that use
it. From testing, QNAP, Unraid, and Home Assistant (in addition to
Synology) all do not play well with using an exit node. For now,
we're disabling this setting from the UI. CLI should be updated to
also disallow selection of an exit node from these platforms.
All platforms still allow for advertising as an exit node.
Co-authored-by: Will Norris <will@tailscale.com>
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously were always setting `UseSocketOnly` because we were
comparing `args.socketpath != ""`, but `args.socketpath` flag
always gets filled with `paths.DefaultTailscaledSocket()` when
not provided. Rather than comparing to the empty string, compare
to the default value to determine if `UseSocketOnly` should be
set.
Should fix issue with web client being unreachable for Mac App
Store variant of the mac build.
Updates #16054
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add confirmation dialogs for disconnecting and stopping advertisement
of a subnet route.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
In Login mode, must first run system auth. But once authorized,
should be able to reach rest of auth logic to check whether the
user can manage the node. This results in showing/hiding the
sign in button in the frontend login toggle.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Calling DebugPacketFilterRules fails when the node is not logged
in, which was causing 500 errors on the node data endpoint after
logging the node out.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Even if connected to the login client over tailscale, still check
platform auth so the browser can obtain the tokens it needs to make
platform requests complete successfully.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Updates:
* Card component used throughout instead of custom card class
* SSH toggle changed to non-editable text/status icon in readonly
* Red error text on subnet route input when route post failed
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Precompress webclient assets with precompress util. This cuts our
css and js build sizes to about 1/3 of non-compressed size. Similar
compression done on tsconnect and adminhttp assets.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This commit makes some restructural changes to how we handle api
posting from the web client frontend.
Now that we're using SWR, we have less of a need for hooks like
useNodeData that return a useSWR response alongside some mutation
callbacks. SWR makes it easy to mutate throughout the UI without
needing access to the original data state in order to reflect
updates. So, we can fetch data without having to tie it to post
callbacks that have to be passed around through components.
In an effort to consolidate our posting endpoints, and make it
easier to add more api handlers cleanly in the future, this change
introduces a new `useAPI` hook that returns a single `api` callback
that can make any changes from any component in the UI. The hook
itself handles using SWR to mutate the relevant data keys, which
get globally reflected throughout the UI.
As a concurrent cleanup, node types are also moved to their own
types.ts file, to consolidate data types across the app.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Remove padding on top of search bar, remove rounded corners of
bottom border of earch bar, and add auto focus.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a footer to the device details page that mirrors license and
policy content on other Tailscale clients.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add workflow to run yarn lint/test/format-check against the web
client on pull requests.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Updates the IP address on home view to open a copyable list of node
addresses on click. And makes various values on the details view
copyable text items, mirroring the machine admin panel table.
As part of these changes, pulls the AddressCard, NiceIP and QuickCopy
components from the admin panel, with the AddressCard slightly modified
to avoid needing to also pull in the CommandLine component.
A new toaster interface is also added, allowing us to display success
and failure toasts throughout the UI. The toaster code is slightly
modified from it's admin form to avoid the need for some excess
libraries.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Makes the following changes:
* Use “link” class in various spots
* Remove button appearance on Exit Node dropdown in readonly mode
* Update `-stone-` colors to `-gray-` (couple spots missed by
original color config commit)
* Pull full ui/button component from admin panel, and update
buttons throughout UI to use this component
* Remove various buttons in readonly view to match mocks
* Add route (and “pending approval”) highlights to Subnet router
settings card
* Delete legacy client button styles from index.css
* Fix overflow of IPv6 address on device details view
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Fixes a TODO in web.authorizeRequest.
`getSession` calls `WhoIs` already. Call `getSession` earlier in
`authorizeRequest` so we can avoid the duplicate `WhoIs` check on
the same request.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds AllowedIPs to PeerStatus, allowing for easier lookup of the
routes allowed to be routed to a node. Will be using the AllowedIPs
of the self node from the web client interface to display approval
status of advertised routes.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
6e30c9d1f added eslint to the web client. As a part of that change,
the existing yarn.lock file was removed and yarn install run to build
with a clean yarn dependencies set with latest versions. This caused
a change in the "vite-plugin-rewrite-all" package that fails at build
time with our existing vite config. This is a known bug with some
suggested fixes:
https://vitejs.dev/guide/troubleshooting.html#this-package-is-esm-only
Rather than editing our package.json type, this commit reverts back
the yarn.lock file to it's contents at the commit just before 6e30c9d1f
and then only runs yarn install to add the new eslint packages, rather
than installing the latest versions of all packages.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add eslint to require stricter typescript rules, particularly around
required hook dependencies. This commit also updates any files that
were now throwing errors with eslint.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Enforcing inclusion of our OSS license at the top of .ts and .tsx
files. Also updates any relevant files in the repo that were
previously missing the license comment. An additional `@license`
comment is added to client/web/src/index.tsx to preserve the
license in generated Javascript.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds Inter font and uses it as the default for the web UI.
Creates a new /assets folder to house the /fonts, and moves /icons
to live here too.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add exit node selector (in full management client only) that allows
for advertising as an exit node, or selecting another exit node on
the Tailnet for use.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This change removes the existing debug-web-client localapi endpoint
and replaces it with functions passed directly to the web.ServerOpts
when constructing a web.ManageServerMode client.
The debug-web-client endpoint previously handled making noise
requests to the control server via the /machine/webclient/ endpoints.
The noise requests must be made from tailscaled, which has the noise
connection open. But, now that the full client is served from
tailscaled, we no longer need to proxy this request over the localapi.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
When the viewing user is accessing a webclient not over Tailscale,
they must connect over Tailscale before being able to log into the
full management client, which is served over TS. This change adds
a check that the user is able to access the node's tailscale IP.
If not able to, the signin button is disabled. We'll also be adding
Copy here to help explain to the user that they must connect to
Tailscale before proceeding.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new sync.Mutex field to the webClient struct, rather than
using the general LocalBackend mutex. Since webClientGetOrInit
(previously WebClientInit) gets called on every connection, we
want to avoid holding the lock on LocalBackend just to check if
the server is initialized.
Moves all web_client.go funcs over to using the webClient.mu field.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
No longer using this! Readonly state fully managed via auth endpoint.
Also getting rid of old Legacy server mode.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
For consistency with the "WebClient" naming of the other functions
here. Also fixed a doc typo.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Causing issues building a stable release. Getting rid of the flag
for now because it was only available in unstable, can still be
turned on through localapi.
A #cleanup
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Initial addition of device details view on the frontend. A little
more backend piping work to come to fill all of the detail fields,
for now using placeholders.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously had HMR websocket set to run from a different port
than the http proxy server. This was an old setting carried over
from the corp repo admin panel config. It's messing with hot
reloads when run from the tailscaled web client, as it keeps
causing the full page to refresh each time a connection is made.
Switching back to the default config here fixes things.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
If the status request to check for the preview node cap fails,
continue with starting up the legacy client.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Splits auth session creation into two new endpoints:
/api/auth/session/new - to request a new auth session
/api/auth/session/wait - to block until user has completed auth url
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Now uses webClientAtomicBool as the source of truth for whether the web
client should be running in tailscaled, with it updated when either the
RunWebClient pref or CapabilityPreviewWebClient node capability changes.
This avoids requiring holding the LocalBackend lock on each call to
ShouldRunWebClient to check for the CapabilityPreviewWebClient value.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
For consistency and clarity around what the LocalBackend.web field
is used for.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This commit makes the following structural changes to the web
client interface. No user-visible changes.
1. Splits login, legacy, readonly, and full management clients into
their own components, and pulls them out into their own view files.
2. Renders the same Login component for all scenarios when the client
is not logged in, regardless of legacy or debug mode. Styling comes
from the existing legacy login, which is removed from legacy.tsx
now that it is shared.
3. Adds a ui folder to hold non-Tailscale-specific components,
starting with ProfilePic, previously housed in app.tsx.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously returned errTaggedSource in the case that of any tagged
source. Now distinguishing whether the source was local or remote.
We'll be presenting the two cases with varying copy on the frontend.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This commit makes two changes to the web client auth flow error
handling:
1. Properly passes back the error code from the noise request from
the localapi. Previously we were using io.Copy, which was always
setting a 200 response status code.
2. Clean up web client browser sessions on any /wait endpoint error.
This avoids the user getting in a stuck state if something goes
wrong with their auth path.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Stores ID from tailcfg.WebClientAuthResponse in browser session
data, and uses ID to hit control server /wait endpoint.
No longer need the control url cached, so removed that from Server.
Also added optional timeNow field, initially to manage time from
tests.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
