Some CI runner images now have cigocacher baked in. Skip building if
it's already present.
Updates tailscale/corp#35667
Change-Id: I5ea0d606d44b1373bc1c8f7bca4ab780e763e2a9
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Normalize 0.0.0.0 and :: to wildcard in resolveListenAddr so listeners
match incoming connections.
Fix ephemeral port allocation across all three modes: extract assigned
ports from gVisor listeners (TUN TCP and UDP), and add an ephemeral port
allocator for netstack TCP.
Updates #6815
Updates #12182Fixes#14042
Signed-off-by: James Tucker <jftucker@gmail.com>
I was confused when everything I was reading in the CI failure was
saying `go mod tidy`, but the thing that was actually failing was
related to nix flakes. Rename the pipeline and step name to the `make
tidy` that it actually runs.
Updates #16637
Signed-off-by: James Tucker <james@tailscale.com>
Server.Close held s.mu for the entire shutdown duration, including
netstack.Close (which waits for gVisor goroutines to exit) and
lb.Shutdown. gVisor callbacks like getTCPHandlerForFlow acquire s.mu via
listenerForDstAddr, so any in-flight gVisor goroutine attempting that
callback during stack shutdown would deadlock with Close.
Replace the mu-guarded closed bool with a sync.Once, and release s.mu
after closing listeners but before the heavy shutdown operations. Also
cancel shutdownCtx before netstack.Close so pending handlers observe
cancellation rather than contending on the lock.
Updates #18423
Signed-off-by: James Tucker <james@tailscale.com>
TestDial in particular sometimes gets stuck in CI for minutes, letting
chantun drop packets during shutdown avoids blocking shutdown.
Updates #18423
Signed-off-by: James Tucker <jftucker@gmail.com>
Windows and macOS are not covered by this change, as neither have safely
distinct names to make it easy to do so. This covers the requested case
on Linux.
Updates #18824
Signed-off-by: James Tucker <james@tailscale.com>
When a tsnet.Server dials its own Tailscale IP, TCP SYN packets are
silently dropped. In inject(), outbound packets with dst=self fail the
shouldSendToHost check and fall through to WireGuard, which has no peer
for the node's own address.
Fix this by detecting self-addressed packets in inject() using isLocalIP
and delivering them back into gVisor's network stack as inbound packets
via a new DeliverLoopback method on linkEndpoint. The outbound packet
must be re-serialized into a new PacketBuffer because outbound packets
have their headers parsed into separate views, but DeliverNetworkPacket
expects raw unparsed data.
Updates #18829
Signed-off-by: James Tucker <james@tailscale.com>
Using the new wait command from #18574 provide a tailscale-online.target
that has a similar usage model to the conventional
`network-online.target`.
Updates #3340
Updates #11504
Signed-off-by: James Tucker <james@tailscale.com>
Adds freedesktop as an option for installing autostart desktop files for
starting the systray application.
Fixes#18766
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
derpActiveFunc was being called immediately as a bare goroutine,
before startGate was resolved. For the firstDerp case, startGate
is c.derpStarted which only closes after dc.Connect() completes,
so derpActiveFunc was firing before the DERP connection existed.
We now block it with the same logic used by runDerpReader and by
runDerpWriter.
Updates: #18810
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
This makes Set.MarshalJSON produce deterministic output in many cases now.
We still need to do make it deterministic for non-ordered types.
Updates #18808
Change-Id: I7f341ec039c661a8e88d07d7f4dc0f15d5d4ab86
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This works for Tailscale SSH, but not for account logins (due to another
process potentially starting that login, or `--operator` limitations).
RELNOTE=The systray app now opens login links for SSH check mode in a
browser.
Updates #8551
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The test ping() passed the full 60s context to each PingWithOpts call,
so if the first attempt hung (DERP not yet registered), the retry loop
never reached attempt 2. Use a 2s per-call timeout instead.
Updates: #18810
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
When an exit node has been set and a new default route is added,
create a new rtable in the default rdomain and add the current
default route via its physical interface. When control() is
requesting a connection not go through the exit-node default route,
we can use the SO_RTABLE socket option to force it through the new
rtable we created.
Updates #17321
Signed-off-by: joshua stein <jcs@jcs.org>
For paring back build tag variant CI runs' set of packages to test.
Updates tailscale/corp#28679
Change-Id: Iba46fd1f58c1eaee1f7888ef573bc8b14fa73208
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/k8s-operator/deploy/examples
Adds exitnode.yaml to k8s-operator
Fixes#18086
Signed-off-by: Christopher Mosetick <office@cpm.is>
* cmd/k8s-operator/deploy/examples: update connector and add exitnode examples
- Remove exitNode: true from connector.yaml to keep it focused as a subnet router example
- Update connector.yaml header comment to remove exit node reference and add pointer hint to exitnode.yaml
- Clarify exitnode.yaml comments to accurately describe separate Connector deployment pattern
Fixes#18086
Signed-off-by: Christopher Mosetick <office@cpm.is>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
* Update cmd/k8s-operator/deploy/examples/exitnode.yaml
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
---------
Signed-off-by: Christopher Mosetick <office@cpm.is>
Signed-off-by: Chris Mosetick <cmosetick@gmail.com>
Co-authored-by: David Bond <davidsbond@users.noreply.github.com>
The test was making HTTP requests before waiting for probes to
complete their initial run in "once" mode. This created a race where
sometimes the probe's previous state was empty (0 results) and
sometimes it had one result, causing inconsistent RecentResults and
PreviousSuccessRatio values.
Fixed by waiting for all probes to complete via their stopped channels
before making HTTP requests, matching the pattern used in other tests
like TestProberRunHandler and TestRunAllHandler.
Fixes#18806
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Add PacketMatch hooks to the packet filter, allowing extensions to
customize filtering decisions:
- IngressAllowHooks: checked in RunIn after pre() but before the
standard runIn4/runIn6 match rules. Hooks can accept packets to
destinations outside the local IP set. First match wins; the
returned why string is used for logging.
- LinkLocalAllowHooks: checked inside pre() for both ingress and
egress, providing exceptions to the default policy of dropping
link-local unicast packets. First match wins. The GCP DNS address
(169.254.169.254) is always allowed regardless of hooks.
PacketMatch returns (match bool, why string) to provide a log reason
consistent with the existing filter functions.
Hooks are registered via the new FilterHooks struct in ipnext.Hooks
and wired through to filter.Filter in LocalBackend.updateFilterLocked.
Fixestailscale/corp#35989Fixestailscale/corp#37207
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
The devshell had the wrong name expected by the flake compat package causing
weird behaviour if you loaded it initiating the wrong go compiler.
Updates #16637
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
The old check was too aggressive and required TS_GO_NEXT=1 at runtime
as well, which is too strict and onerous.
This is a sanity check only (and an outdated one, at that); it's okay for
it to be slightly loose and permit two possible values. If either is working,
we're already way past the old bug that this was introduced to catch.
Updates tailscale/corp#36382
Change-Id: Ib9a62e10382cd889ba590c3539e6b8535c6b19fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/containerboot,kube/services: support the ability to automatically advertise services on startup
Updates #17769
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* cmd/containerboot: don't assume we want to use kube state store if in kubernetes
Fixes#8188
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
The new version of app connector (conn25) needs to read DNS responses
for domains it is interested in and store and swap out IP addresses.
Add a hook to dns manager to enable this.
Give the conn25 updated netmaps so that it knows when to assign
connecting addresses and from what pool.
Assign an address when we see a DNS response for a domain we are
interested in, but don't do anything with the address yet.
Updates tailscale/corp#34252
Signed-off-by: Fran Bull <fran@tailscale.com>
Add more explicit `--bind-address` and `--bind-port` flags to the `tailscale netcheck` CLI to give users control over UDP probes' source IP and UDP port.
This was already supported in a less documented manner via the` TS_DEBUG_NETCHECK_UDP_BIND` environment variable. The environment variable reference is preserved and used as a fallback value in the absence of these new CLI flags.
Updates tailscale/corp#36833
Signed-off-by: Amal Bansode <amal@tailscale.com>
--auth is already best-effort, but we saw some CI failures due to
failing to fetch stats when cigocached was overwhelmed recently. Make
sure it fails more gracefully in the absence of cigocached like the rest
of cigocacher already does.
Updates tailscale/corp#37059
Change-Id: I0703b30b1c5a7f8c649879a87e6bcd2278610208
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
fixestailscale/corp#37048
We're duplicating logic in AnyInterfaceUp in the ChangeDelta
and we're duplicating it wrong. The new State has the logic
for this based on the HaveV6 and HaveV4 flags.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Stop stripping the "*." prefix from wildcard domains when used
as storage keys. Instead, replace "*" with "wildcard_" only at
the filesystem boundary in certFile and keyFile. This prevents
wildcard and non-wildcard certs from colliding in storage.
Updates #1196
Updates #7081
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
Updating a node on a testcontrol server should trigger netmap updates to
all connected streaming clients. This was not the case previous to this
change and consequently caused race conditions in tests. It was possible
for a test to call UpdateNode and for connected nodes to never see the
update propagate.
Updates #16340Fixes#18703
Signed-off-by: Harry Harpham <harry@tailscale.com>
dependabot[bot]
License Updater
Tom Proctor
James Tucker
James Tucker
Brad Fitzpatrick
Claus Lensbøl
Fernando Serboncini
Andrew Lytvynov
joshua stein
Chris Mosetick
Mike O'Driscoll
Michael Ben-Ami
Kristoffer Dalby
Tom Meadows
Fran Bull
Amal Bansode
Jonathan Nobels
Harry Harpham