This flag is currently no-op and hidden. The flag does round trip
through the related pref. Subsequent commits will tie them to
net/udprelay.Server. There is no corresponding "tailscale up" flag,
enabling/disabling of the relay server will only be supported via
"tailscale set".
This is a string flag in order to support disablement via empty string
as a port value of 0 means "enable the server and listen on a random
unused port". Disablement via empty string also follows existing flag
convention, e.g. advertise-routes.
Early internal discussions settled on "tailscale set --relay="<port>",
but the author felt this was too ambiguous around client vs server, and
may cause confusion in the future if we add related flags.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
`tailscale set` was created to set preferences, which used to be
overloaded into `tailscale up`. To move people over to the new
command, `up` was supposed to be frozen and no new preference flags
would be added. But people forgot, there was no test to warn them, and
so new flags were added anyway.
TestUpFlagSetIsFrozen complains when new flags are added to
`tailscale up`. It doesn’t try all combinations of GOOS, but since
the CI builds in every OS, the pull-request tests should cover this.
Updates #15460
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
Ensure no services are advertised as part of shutting down tailscaled.
Prefs are only edited if services are currently advertised, and they're
edited we wait for control's ~15s (+ buffer) delay to failover.
Note that editing prefs will trigger a synchronous write to the state
Secret, so it may fail to persist state if the ProxyGroup is getting
scaled down and therefore has its RBAC deleted at the same time, but that
failure doesn't stop prefs being updated within the local backend,
doesn't affect connectivity to control, and the state Secret is
about to get deleted anyway, so the only negative side effect is a harmless
error log during shutdown. Control still learns that the node is no
longer advertising the service and triggers the failover.
Note that the first version of this used a PreStop lifecycle hook, but
that only supports GET methods and we need the shutdown to trigger side
effects (updating prefs) so it didn't seem appropriate to expose that
functionality on a GET endpoint that's accessible on the k8s network.
Updates tailscale/corp#24795
Change-Id: I0a9a4fe7a5395ca76135ceead05cbc3ee32b3d3c
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
As IPv4 and IPv6 end up with different MSS and different congestion
control strategies, proxying between them can really amplify TCP
meltdown style conditions in many real world network conditions, such as
with higher latency, some loss, etc.
Attempt to match up the protocols, otherwise pick a destination address
arbitrarily. Also shuffle the target address to spread load across
upstream load balancers.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
The test suite had grown to about 20s on my machine, but it doesn't
do much taxing work so was a good candidate to parallelise. Now runs
in under 2s on my machine.
Updates #cleanup
Change-Id: I2fcc6be9ca226c74c0cb6c906778846e959492e4
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The earlier #15534 prevent some dup string flags. This does it for all
flag types.
Updates #6813
Change-Id: Iec2871448394ea9a5b604310bdbf7b499434bf01
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some CLI flags support multiple values separated by commas. These flags
are intended to be declared only once and will silently ignore subsequent
instances. This will now throw an error if multiple instances of advertise-tags
and advertise-routes are detected.
Fixes#6813
Signed-off-by: Jason O'Donnell <2160810+jasonodonnell@users.noreply.github.com>
Ensure that the upstream is always queried, so that if upstream is going
to NXDOMAIN natc will also return NXDOMAIN rather than returning address
allocations.
At this time both IPv4 and IPv6 are still returned if upstream has a
result, regardless of upstream support - this is ~ok as we're proxying.
Rewrite the tests to be once again slightly closer to integration tests,
but they're still very rough and in need of a refactor.
Further refactors are probably needed implementation side too, as this
removed rather than added units.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I added yet another one in 6d117d64a2 but that new one is at the
best place int he dependency graph and has the best name, so let's use
that one for everything possible.
types/lazy can't use it for circular dependency reasons, so unexport
that copy at least.
Updates #cleanup
Change-Id: I25db6b6a0d81dbb8e89a0a9080c7f15cbf7aa770
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make the perPeerState objects able to function independently without a
shared reference to the connector.
We don't currently change the values from connector that perPeerState
uses at runtime. Explicitly copying them at perPeerState creation allows
us to, for example, put the perPeerState into a consensus algorithm in
the future.
Updates #14667
Signed-off-by: Fran Bull <fran@tailscale.com>
So we can link tailscale and tailscaled together into one.
Updates #5794
Change-Id: I9a8b793c64033827e4188931546cbd64db55982e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Avoid the unbounded runtime during random allocation, if random
allocation fails after a first pass at random through the provided
ranges, pick the next free address by walking through the allocated set.
The new ipx utilities provide a bitset based allocation pool, good for
small to moderate ranges of IPv4 addresses as used in natc.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
For hooking up websocket VM clients to natlab.
Updates #13038
Change-Id: Iaf728b9146042f3d0c2d3a5e25f178646dd10951
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Re-enable HA Ingress again that was disabled for 1.82 release.
This reverts commit fea74a60d5.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Not all platforms have hardlinks, or not easily.
This lets a "tailscale" wrapper script set an environment variable
before calling tailscaled.
Updates #2233
Change-Id: I9eccc18651e56c106f336fcbbd0fd97a661d312e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we update ipnlocal.LocalBackend to allow registering callbacks for control client creation
and profile changes. We also allow to register ipnauth.AuditLogFunc to be called when an auditable
action is attempted.
We then use all this to invert the dependency between the auditlog and ipnlocal packages and make
the auditlog functionality optional, where it only registers its callbacks via ipnlocal-provided hooks
when the auditlog package is imported.
We then underscore-import it when building tailscaled for Windows, and we'll explicitly
import it when building xcode/ipn-go-bridge for macOS. Since there's no default log-store
location for macOS, we'll also need to call auditlog.SetStoreFilePath to specify where
pending audit logs should be persisted.
Fixes#15394
Updates tailscale/corp#26435
Updates tailscale/corp#27012
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The default values for `tailscale up` and `tailscale set` are supposed
to agree for all common flags. But they don’t for `--accept-routes`
on Windows and from the Mac OS App Store, because `tailscale up`
computes this value based on the operating system:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
In addition, `ipn.Prefs.RouteAll` defaults to true so it disagrees
with both of the flags above.
This patch makes `--accept-routes` use the same logic for in both
commands by hoisting the logic that was buried in `cmd/tailscale/cli`
to `ipn.Prefs.DefaultRouteAll`. Then, all three of defaults can agree.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
The default values for `tailscale up` and `tailscale set` are supposed
to agree on all common flags. But they don’t for `--accept-dns`:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-dns
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-dns
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
This patch makes `--accept-dns` default to true in both commands and
also introduces `TestSetDefaultsMatchUpDefaults` to prevent any future
drift.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
Temporarily make sure that the HA Ingress reconciler does not run,
as we do not want to release this to stable just yet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is a very dumb fix as it has an unbounded worst case runtime. IP
allocation needs to be done in a more sane way in a follow-up.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
cmd/{k8s-operator,containerboot}: check TLS cert before advertising VIPService
- Ensures that Ingress status does not advertise port 443 before
TLS cert has been issued
- Ensure that Ingress backends do not advertise a VIPService
before TLS cert has been issued, unless the service also
exposes port 80
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
These tests aren't perfect, nor is this complete coverage, but this is a
set of coverage that is at least stable.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
Switch from using the Comment field to a ts-scoped annotation for
tracking which operators are cooperating over ownership of a
VIPService.
Updates tailscale/corp#24795
Change-Id: I72d4a48685f85c0329aa068dc01a1a3c749017bf
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a portable way to do a raw LocalAPI request without worrying
about the Unix-vs-macOS-vs-Windows ways of hitting the LocalAPI server.
(It was already possible but tedious with 'tailscale debug local-creds')
Updates tailscale/corp#24690
Change-Id: I0828ca55edaedf0565c8db192c10f24bebb95f1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a flaky failure case where renaming a TLS hostname for an
ingress might leave the old hostname dangling in tailscaled config. This
happened when the proxygroup reconciler loop had an outdated resource
version of the config Secret in its cache after the
ingress-pg-reconciler loop had very recently written it to delete the
old hostname. As the proxygroup reconciler then did a patch, there was
no conflict and it reinstated the old hostname.
This commit updates the patch to an update operation so that if the
resource version is out of date it will fail with an optimistic lock
error. It also checks for equality to reduce the likelihood that we make
the update API call in the first place, because most of the time the
proxygroup reconciler is not even making an update to the Secret in the
case that the hostname has changed.
Updates tailscale/corp#24795
Change-Id: Ie23a97440063976c9a8475d24ab18253e1f89050
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Update the HA Ingress controller to wait until it sees AdvertisedServices
config propagated into at least 1 Pod's prefs before it updates the status
on the Ingress, to ensure the ProxyGroup Pods are ready to serve traffic
before indicating that the Ingress is ready
Updates tailscale/corp#24795
Change-Id: I1b8ce23c9e312d08f9d02e48d70bdebd9e1a4757
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Allows the use of tsweb without pulling in all of the heavy prometheus
client libraries, protobuf and so on.
Updates #15160
Signed-off-by: David Anderson <dave@tailscale.com>
This PR adds some custom logic for reading and writing
kube store values that are TLS certs and keys:
1) when store is initialized, lookup additional
TLS Secrets for this node and if found, load TLS certs
from there
2) if the node runs in certs 'read only' mode and
TLS cert and key are not found in the in-memory store,
look those up in a Secret
3) if the node runs in certs 'read only' mode, run
a daily TLS certs reload to memory to get any
renewed certs
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When the Ingress is updated to a new hostname, the controller does not
currently clean up the old VIPService from control. Fix this up to parse
the ownership comment correctly and write a test to enforce the improved
behaviour
Updates tailscale/corp#24795
Change-Id: I792ae7684807d254bf2d3cc7aa54aa04a582d1f5
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This adds support for using ACL Grants to configure a role for the
auto-provisioned user.
Fixestailscale/corp#14567
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
cmd/containerboot: manage HA Ingress TLS certs from containerboot
When ran as HA Ingress node, containerboot now can determine
whether it should manage TLS certs for the HA Ingress replicas
and call the LocalAPI cert endpoint to ensure initial issuance
and renewal of the shared TLS certs.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
updates tailscale/corp#26435
Adds client support for sending audit logs to control via /machine/audit-log.
Specifically implements audit logging for user initiated disconnections.
This will require further work to optimize the peristant storage and exclusion
via build tags for mobile:
tailscale/corp#27011tailscale/corp#27012
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Ensure that the src address for a connection is one of the primary
addresses assigned by Tailscale. Not, for example, a virtual IP address.
Updates #14667
Signed-off-by: Fran Bull <fran@tailscale.com>
Add support for Cross-Origin XHR requests to the openid-configuration
endpoint to enable clients like Grafana's auto-population of OIDC setup
data from its contents.
Updates https://github.com/tailscale/tailscale/issues/10263
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
natc itself can't immediately fix the problem, but it can more correctly
error that return bad addresses.
Updates tailscale/corp#26968
Signed-off-by: James Tucker <james@tailscale.com>
For people who can't use LetsEncrypt because it's banned.
Per https://github.com/tailscale/tailscale/issues/11776#issuecomment-2520955317
This does two things:
1) if you run derper with --certmode=manual and --hostname=$IP_ADDRESS
we previously permitted, but now we also:
* auto-generate the self-signed cert for you if it doesn't yet exist on disk
* print out the derpmap configuration you need to use that
self-signed cert
2) teaches derp/derphttp's derp dialer to verify the signature of
self-signed TLS certs, if so declared in the existing
DERPNode.CertName field, which previously existed for domain fronting,
separating out the dial hostname from how certs are validates,
so it's not overloaded much; that's what it was meant for.
Fixes#11776
Change-Id: Ie72d12f209416bb7e8325fe0838cd2c66342c5cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/k8s-operator: ensure HA Ingress can operate in multicluster mode.
Update the owner reference mechanism so that:
- if during HA Ingress resource creation, a VIPService
with some other operator's owner reference is already found,
just update the owner references to add one for this operator
- if during HA Ingress deletion, the VIPService is found to have owner
reference(s) from another operator, don't delete the VIPService, just
remove this operator's owner reference
- requeue after HA Ingress reconciles that resulted in VIPService updates,
to guard against overwrites due to concurrent operations from different
clusters.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Jordan Whited
Simon Law
Tom Proctor
James Tucker
Brad Fitzpatrick
Jason O'Donnell
phanirithvij
Fran Bull
Kot
Irbe Krumina
Nick Khyl
David Anderson
Anton Tolchanov
Paul Scott
Jonathan Nobels
Patrick O'Doherty