The heartbeat package does nothing if not configured anyway, so don't
even put it in the image and pay the cost of it running.
Updates #13038
Updates #1866
Change-Id: Id22c0fb1f8395ad21ab0e0350973d31730e8d39f
The change in b7e48058c8 was too loose; it also captured the CLI
being run as a child process under cmd/tta.
Updates #13038
Updates #1866
Change-Id: Id410b87132938dd38ed4dd3959473c5d0d242ff5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
These three packages aren't in gokrazy/tsapp/config.json but
used to be. Unfortunately, that meant that were being included
in the resulting image. Apparently `gok` doesn't delete them or
warn about them being present on disk when they're moved from
the config file.
Updates #13038
Updates #1866
Change-Id: I54918a9e3286ea755b11dde5e9efdd433b8f8fb8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had a mix of 0-based and 1-based nodes and MACs in logs.
Updates #13038
Change-Id: I36d1b00f7f94b37b4ae2cd439bcdc5dbee6eda4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using https://github.com/gokrazy/gokrazy/pull/275
This is much lower latency than logcatcher, which is higher latency
and chunkier. And this is better than getting it via 'tailscale debug
daemon-logs', which misses early interesting logs.
Updates #13038
Change-Id: I499ec254c003a9494c0e9910f9c650c8ac44ef33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Similar to UseSocketOnly, but pulled out separately in case
people are doing unknown weird things.
Updates #13038
Change-Id: I7478e5cb9794439b947440b831caa798941845ea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To test local connections.
Updates #13038
Change-Id: I575dcab31ca812edf7d04fa126772611cf89b9a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And don't make guests under vnet/natlab upload to logcatcher,
as there won't be a valid cert anyway.
Updates #13038
Change-Id: Ie1ce0139788036b8ecc1804549a9b5d326c5fef5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It seems some security software or macOS itself might be MITMing TLS
(for ScreenTime?), so don't warn unless it fails x509 validation
against system roots.
Updates #3198
Change-Id: I6ea381b5bb6385b3d51da4a1468c0d803236b7bf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All wasi* are GOARCH wasm, so check that instead.
Updates #12732
Change-Id: Id3cc346295c1641bcf80a6c5eb1ad65488509656
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... and then do approximately nothing with that information, other
than a big TODO. This is mostly me relearning this code and leaving
breadcrumbs for others in the future.
Updates #12724
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
If we get an non-disco presumably-wireguard-encrypted UDP packet from
an IP:port we don't recognize, rather than drop the packet, give it to
WireGuard anyway and let WireGuard try to figure out who it's from and
tell us.
This uses the new hook added in https://github.com/tailscale/wireguard-go/pull/27
Updates tailscale/corp#20732
Change-Id: I5c61a40143810592f9efac6c12808a87f924ecf2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For testing. Lee wants to play with 'AWS Global Accelerator Custom
Routing with Amazon Elastic Kubernetes Service'. If this works well
enough, we can promote it.
Updates #12578
Change-Id: I5018347ed46c15c9709910717d27305d0aedf8f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The DERP Return Path Optimization (DRPO) is over four years old (and
on by default for over two) and we haven't had problems, so time to
remove the emergency shutoff code (controlknob) which we've never
used. The controlknobs are only meant for new features, to mitigate
risk. But we don't want to keep them forever, as they kinda pollute
the code.
Updates #150
Change-Id: If021bc8fd1b51006d8bddd1ffab639bb1abb0ad1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And fix up a bogus comment and flesh out some other comments.
Updates #cleanup
Change-Id: Ia60a1c04b0f5e44e8d9587914af819df8e8f442a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix regression from #8108 (Mar 2023). Since that change, gocross has
always been rebuilt on each run of ./tool/go (gocross-wrapper.sh),
adding ~100ms. (Well, not totally rebuilt; cmd/go's caching still
ends up working fine.)
The problem was $gocross_path was just "gocross", which isn't in my
path (and "." isn't in my $PATH, as it shouldn't be), so this line was
always evaluating to the empty string:
gotver="$($gocross_path gocross-version 2>/dev/null || echo '')"
The ./gocross is fine because of the earlier `cd "$repo_root"`
Updates tailscale/corp#21262
Updates tailscale/corp#21263
Change-Id: I80d25446097a3bb3423490c164352f0b569add5f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In hopes it'll be found more.
Updates tailscale/corp#20844
Change-Id: Ic92ee9908f45b88f8770de285f838333f9467465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And some misc doc tweaks for idiomatic Go style.
Updates #cleanup
Change-Id: I3ca45f78aaca037f433538b847fd6a9571a2d918
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
PeerPresentFlags was added in 5ffb2668ef but wasn't plumbed through to
the RunConnectionLoop. Rather than add yet another parameter (as
IP:port was added earlier), pass in the raw PeerPresentMessage and
PeerGoneMessage struct values, which are the same things, plus two
fields: PeerGoneReasonType for gone and the PeerPresentFlags from
5ffb2668ef.
Updates tailscale/corp#17816
Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I couldn't convince myself the old way was safe and couldn't lose
writes.
And it seemed too complicated.
Updates tailscale/corp#21104
Change-Id: I17ba7c7d6fd83458a311ac671146a1f6a458a5c1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
sendMeshUpdates tries to write as much as possible without blocking,
being careful to check the bufio.Writer.Available size before writes.
Except that regressed in 6c791f7d60 which made those messages larger, which
meants we were doing network I/O with the Server mutex held.
Updates tailscale/corp#13945
Change-Id: Ic327071d2e37de262931b9b390cae32084811919
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix regression from bd93c3067e where I didn't notice the
32-bit test failure was real and not its usual slowness-related
regression. Yay failure blindness.
Updates #12526
Change-Id: I00e33bba697e2cdb61a0d76a71b62406f6c2eeb9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was hex-ifying the String() form of key.NodePublic, which was already hex.
I noticed in some logs:
"client 6e6f64656b65793a353537353..."
And thought that 6x6x6x6x looked strange. It's "nodekey:" in hex.
Updates tailscale/corp#20844
Change-Id: Ib9f2d63b37e324420b86efaa680668a9b807e465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I meant to do this in the earlier change and had a git fail.
To atone, add a test too while I'm here.
Updates #12486
Updates #12507
Change-Id: I4943b454a2530cb5047636f37136aa2898d2ffc7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed we were allocating these every time when they could just
share the same memory. Rather than document ownership, just lock it
down with a view.
I was considering doing all of the fields but decided to just do this
one first as test to see how infectious it became. Conclusion: not
very.
Updates #cleanup (while working towards tailscale/corp#20514)
Change-Id: I8ce08519de0c9a53f20292adfbecd970fe362de0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For pprof cosmetic/confusion reasons more than performance, but it
might have tiny speed benefit.
Updates #12486
Change-Id: I40e03714f3afa3a7e7f5e1fa99b81c7e889b91b6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So profiles show more useful names than just func1, func2, func3, etc.
There will still be func1 on them all, but the symbol before will say
what the lookup type is.
Updates #12486
Change-Id: I910b024a7861394eb83d07f5a899eae338cb1f22
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed the not-local-v6 numbers were nowhere near the v4 numbers
(they should be identical) and then saw this. It meant the
Addr().Next() wasn't picking an IP that was no longer local, as
assumed.
Updates #12486
Change-Id: I18dfb641f00c74c6252666bc41bd2248df15fadd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NewContainsIPFunc was previously documented as performing poorly if
there were many netip.Prefixes to search over. As such, we never it used it
in such cases.
This updates it to use bart at a certain threshold (over 6 prefixes,
currently), at which point the bart lookup overhead pays off.
This is currently kinda useless because we're not using it. But now we
can and get wins elsewhere. And we can remove the caveat in the docs.
goos: darwin
goarch: arm64
pkg: tailscale.com/net/tsaddr
│ before │ after │
│ sec/op │ sec/op vs base │
NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10)
NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10)
NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10)
NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10)
NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10)
NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10)
geomean 19.60n 19.07n -2.71%
Updates #12486
Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NewContainsIPFunc returns a contains matcher optimized for its
input. Use that instead of what this did before, always doing a test
over each of a list of netip.Prefixes.
goos: darwin
goarch: arm64
pkg: tailscale.com/wgengine/filter
│ before │ after │
│ sec/op │ sec/op vs base │
FilterMatch/file1-8 32.60n ± 1% 18.87n ± 1% -42.12% (p=0.000 n=10)
Updates #12486
Change-Id: I8f902bc064effb431e5b46751115942104ff6531
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To make it easier for people to monitor their custom DERP fleet.
Updates tailscale/corp#20654
Change-Id: Id8af22936a6d893cc7b6186d298ab794a2672524
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This bug was introduced in e6b84f215 (May 2020) but was only used in
tests when stringifying probeProto values on failure so it wasn't
noticed for a long time.
But then it was moved into non-test code in 8450a18aa (Jun 2024) and I
didn't notice during the code movement that it was wrong. It's still
only used in failure paths in logs, but having wrong/ambiguous
debugging information isn't the best.
Whoops.
Updates tailscale/corp#20654
Change-Id: I296c727ed1c292a04db7b46ecc05c07fc1abc774
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This updates breakglass to use the now-upsteamed
https://github.com/gokrazy/breakglass/pull/18 change
so we're not using our fork now.
It also adds a gok wrapper tool, because doing it by hand
was tedious.
Updates #1866
Change-Id: Ifacbf5fbf0e377b3bd95c5f76c18751c2e1af7d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The derp metrics got out of sync in 74eb99aed1 (2023-03).
They were fixed in 0380cbc90d (2024-05).
This adds some further guardrails (atop the previous fix) to make sure
they don't get out of sync again.
Updates #12288
Change-Id: I809061a81f8ff92f45054d0253bc13871fc71634
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This busybox fwmaskWorks check was added before we moved away from
using the "ip" command to using netlink directly.
So it's now just wasted work (and log spam on Gokrazy) to check the
"ip" command capabilities if we're never going to use it.
Do it lazily instead.
Updates #12277
Change-Id: I8ab9acf64f9c0d8240ce068cb9ec8c0f6b1ecee7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The previous LocalBackend & CLI 'up' changes improved some stuff, but
might've been too aggressive in some edge cases.
This simplifies the authURL vs authURLSticky distinction and removes
the interact field, which seemed to just just be about duplicate URL
suppression in IPN bus, back from when the IPN bus was a single client
at a time. This moves that suppression to a different spot.
Fixes#12119
Updates #12028
Updates #12042
Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a small window in ipnserver after we assigned a LocalBackend
to the ipnserver's atomic but before we Start'ed it where our
initalization Start could conflict with API calls from the LocalAPI.
Simplify that a bit and lay out the rules in the docs.
Updates #12028
Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I found this too hard to read before.
This is pulled out of #12033 as it's unrelated cleanup in retrospect.
Updates #12028
Change-Id: I727c47e573217e3d1973c5b66a76748139cf79ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The CLI "up" command is a historical mess, both on the CLI side and
the LocalBackend side. We're getting closer to cleaning it up, but in
the meantime it was again implicated in flaky tests.
In this case, the background goroutine running WatchIPNBus was very
occasionally running enough to get to its StartLoginInteractive call
before the original goroutine did its Start call. That meant
integration tests were very rarely but sometimes logging in with the
default control plane URL out on the internet
(controlplane.tailscale.com) instead of the localhost control server
for tests.
This also might've affected new Headscale etc users on initial "up".
Fixes#11960Fixes#11962
Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed this while working on the following fix to #11962.
Updates #11962
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I4c5894d8899d1ae8c42f54ecfd4d05a4a7ac598c
