This commit adds the subcommands `get-config` and `set-config` to Serve,
which can be used to read the current Tailscale Services configuration
in a standard syntax and provide a configuration to declaratively apply
with that same syntax.
Both commands must be provided with either `--service=svc:service` for
one service, or `--all` for all services. When writing a config,
`--set-config --all` will overwrite all existing Services configuration,
and `--set-config --service=svc:service` will overwrite all
configuration for that particular Service. Incremental changes are not
supported.
Fixestailscale/corp#30983.
cmd/tailscale/cli: hide serve "get-config"/"set-config" commands for now
tailscale/corp#33152 tracks unhiding them when docs exist.
Signed-off-by: Naman Sood <mail@nsood.in>
This patch fixes several issues related to printing login and device
approval URLs, especially when `tailscale up` is interrupted:
1. Only print a login URL that will cause `tailscale up` to complete.
Don't print expired URLs or URLs from previous login attempts.
2. Print the device approval URL if you run `tailscale up` after
previously completing a login, but before approving the device.
3. Use the correct control URL for device approval if you run a bare
`tailscale up` after previously completing a login, but before
approving the device.
4. Don't print the device approval URL more than once (or at least,
not consecutively).
Updates tailscale/corp#31476
Updates #17361
## How these fixes work
This patch went through a lot of trial and error, and there may still
be bugs! These notes capture the different scenarios and considerations
as we wrote it, which are also captured by integration tests.
1. We were getting stale login URLs from the initial IPN state
notification.
When the IPN watcher was moved to before Start() in c011369, we
mistakenly continued to request the initial state. This is only
necessary if you start watching after you call Start(), because
you may have missed some notifications.
By getting the initial state before calling Start(), we'd get
a stale login URL. If you clicked that URL, you could complete
the login in the control server (if it wasn't expired), but your
instance of `tailscale up` would hang, because it's listening for
login updates from a different login URL.
In this patch, we no longer request the initial state, and so we
don't print a stale URL.
2. Once you skip the initial state from IPN, the following sequence:
* Run `tailscale up`
* Log into a tailnet with device approval
* ^C after the device approval URL is printed, but without approving
* Run `tailscale up` again
means that nothing would ever be printed.
`tailscale up` would send tailscaled the pref `WantRunning: true`,
but that was already the case so nothing changes. You never get any
IPN notifications, and in particular you never get a state change to
`NeedsMachineAuth`. This means we'd never print the device approval URL.
In this patch, we add a hard-coded rule that if you're doing a simple up
(which won't trigger any other IPN notifications) and you start in the
`NeedsMachineAuth` state, we print the device approval message without
waiting for an IPN notification.
3. Consider the following sequence:
* Run `tailscale up --login-server=<custom server>`
* Log into a tailnet with device approval
* ^C after the device approval URL is printed, but without approving
* Run `tailscale up` again
We'd print the device approval URL for the default control server,
rather than the real control server, because we were using the `prefs`
from the CLI arguments (which are all the defaults) rather than the
`curPrefs` (which contain the custom login server).
In this patch, we use the `prefs` if the user has specified any settings
(and other code will ensure this is a complete set of settings) or
`curPrefs` if it's a simple `tailscale up`.
4. Consider the following sequence: you've logged in, but not completed
device approval, and you run `down` and `up` in quick succession.
* `up`: sees state=NeedsMachineAuth
* `up`: sends `{wantRunning: true}`, prints out the device approval URL
* `down`: changes state to Stopped
* `up`: changes state to Starting
* tailscaled: changes state to NeedsMachineAuth
* `up`: gets an IPN notification with the state change, and prints
a second device approval URL
Either URL works, but this is annoying for the user.
In this patch, we track whether the last printed URL was the device
approval URL, and if so, we skip printing it a second time.
Signed-off-by: Alex Chan <alexc@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Saves 352 KB, removing one of our two HTTP/2 implementations linked
into the binary.
Fixes#17305
Updates #15015
Change-Id: I53a04b1f2687dca73c8541949465038b69aa6ade
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A following change will split out the controlclient.NoiseClient type
out, away from the rest of the controlclient package which is
relatively dependency heavy.
A question was where to move it, and whether to make a new (a fifth!)
package in the ts2021 dependency chain.
@creachadair and I brainstormed and decided to merge
internal/noiseconn and controlclient.NoiseClient into one package,
with names ts2021.Conn and ts2021.Client.
For ease of reviewing the subsequent PR, this is the first step that
just renames the internal/noiseconn package to control/ts2021.
Updates #17305
Change-Id: Ib5ea162dc1d336c1d805bdd9548d1702dd6e1468
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It never launched and I've lost hope of it launching and it's in my
way now, so I guess it's time to say goodbye.
Updates tailscale/corp#4383
Updates #17305
Change-Id: I2eb551d49f2fb062979cc307f284df4b3dfa5956
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Tailscale CLI is the primary configuration interface and as such it
is used in scripts, container setups, and many other places that do not
have a terminal available and should not be made to respond to prompts.
The default is set to false where the "risky" API is being used by the
CLI and true otherwise, this means that the `--yes` flags are only
required under interactive runs and scripts do not need to be concerned
with prompts or extra flags.
Updates #19445
Signed-off-by: James Tucker <james@tailscale.com>
Saves 139 KB.
Also Synology support, which I saw had its own large-ish proxy parsing
support on Linux, but support for proxies without Synology proxy
support is reasonable, so I pulled that out as its own thing.
Updates #12614
Change-Id: I22de285a3def7be77fdcf23e2bec7c83c9655593
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allow the user to access information about routes an app connector has
learned, such as how many routes for each domain.
Fixestailscale/corp#32624
Signed-off-by: Fran Bull <fran@tailscale.com>
This commit fixes a race condition where `tailscale up --force-reauth` would
exit prematurely on an already-logged in device.
Previously, the CLI would wait for IPN to report the "Running" state and then
exit. However, this could happen before the new auth URL was printed, leading
to two distinct issues:
* **Without seamless key renewal:** The CLI could exit immediately after
the `StartLoginInteractive` call, before IPN has time to switch into
the "Starting" state or send a new auth URL back to the CLI.
* **With seamless key renewal:** IPN stays in the "Running" state
throughout the process, so the CLI exits immediately without performing
any reauthentication.
The fix is to change the CLI's exit condition.
Instead of waiting for the "Running" state, if we're doing a `--force-reauth`
we now wait to see the node key change, which is a more reliable indicator
that a successful authentication has occurred.
Updates tailscale/corp#31476
Updates tailscale/tailscale#17108
Signed-off-by: Alex Chan <alexc@tailscale.com>
This partially reverts f3d2fd2.
When that patch was written, the goroutine that responds to IPN notifications
could call `StartLoginInteractive`, creating a race condition that led to
flaky integration tests. We no longer call `StartLoginInteractive` in that
goroutine, so the race is now impossible.
Moving the `WatchIPNBus` call earlier ensures the CLI gets all necessary
IPN notifications, preventing a reauth from hanging.
Updates tailscale/corp#31476
Signed-off-by: Alex Chan <alexc@tailscale.com>
Ideally we would remove this warning entirely, as it is now possible to
reauthenticate without losing connectivty. However, it is still possible to
lose SSH connectivity if the user changes the ownership of the machine when
they do a force-reauth, and we have no way of knowing if they are going to
do that before they do it.
For now, let's just reduce the strength of the warning to warn them that
they "may" lose their connection, rather than they "will".
Updates tailscale/corp#32429
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
In MacOS GUI apps, users have to select folders to share via the GUI. This is both because
the GUI app keeps its own record of shares, and because the sandboxed version of the GUI
app needs to gain access to the shared folders by having the user pick them in a file
selector.
The new build tag `ts_mac_gui` allows the MacOS GUI app build to signal that this
is a MacOS GUI app, which causes the `drive` subcommand to be omitted so that people
do not mistakenly attempt to use it.
Updates tailscale/tailscale#17210
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Add a last seen time on the cli's status command, similar to the web
portal.
Before:
```
100.xxx.xxx.xxx tailscale-operator tagged-devices linux offline
```
After:
```
100.xxx.xxx.xxx tailscale-operator tagged-devices linux offline, last seen 20d ago
```
Fixes#16584
Signed-off-by: Mahyar Mirrashed <mah.mirr@gmail.com>
* tsnet,internal/client/tailscale: resolve OAuth into authkeys in tsnet
Updates #8403.
* internal/client/tailscale: omit OAuth library via build tag
Updates #12614.
Signed-off-by: Naman Sood <mail@nsood.in>
This makes the `switch` command use the helper `matchProfile` function
that was introduced in the `remove` sub command.
Signed-off-by: Esteban-Bermudez <esteban@bermudezaguirre.com>
Fixes#12255
Add a new subcommand to `switch` for removing a profile from the local
client. This does not delete the profile from the Tailscale account, but
removes it from the local machine. This functionality is available on
the GUI's, but not yet on the CLI.
Signed-off-by: Esteban-Bermudez <esteban@bermudezaguirre.com>
I'd started to do this in the earlier ts_omit_server PR but
decided to split it into this separate PR.
Updates #17128
Change-Id: Ief8823a78d1f7bbb79e64a5cab30a7d0a5d6ff4b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
As of this commit (per the issue), the Taildrive code remains where it
was, but in new files that are protected by the new ts_omit_drive
build tag. Future commits will move it.
Updates #17058
Change-Id: Idf0a51db59e41ae8da6ea2b11d238aefc48b219e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/tailscale/cli: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
* derp: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
This is step 4 of making syspolicy a build-time feature.
This adds a policyclient.Get() accessor to return the correct
implementation to use: either the real one, or the no-op one. (A third
type, a static one for testing, also exists, so in general a
policyclient.Client should be plumbed around and not always fetched
via policyclient.Get whenever possible, especially if tests need to use
alternate syspolicy)
Updates #16998
Updates #12614
Change-Id: Iaf19670744a596d5918acfa744f5db4564272978
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, when attempting a risky action, the CLI printed a 5 second countdown saying
"Continuing in 5 seconds...". When the countdown finished, the CLI aborted rather than
continuing.
To avoid confusion, but also avoid accidentally continuing if someone (or an automated
process) fails to manually abort within the countdown, we now explicitly prompt for a
y/n response on whether or not to continue.
Updates #15445
Co-authored-by: Kot C <kot@kot.pink>
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Our own WaitGroup wrapper type was a prototype implementation
for the Go method on the standard sync.WaitGroup type.
Now that there is first-class support for Go,
we should migrate over to using it and delete syncs.WaitGroup.
Updates #cleanup
Updates tailscale/tailscale#16330
Change-Id: Ib52b10f9847341ce29b4ca0da927dc9321691235
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This affects the 1.87.33 unstable release.
Updates #16842
Updates #15160
Change-Id: Ie6d1b2c094d1a6059fbd1023760567900f06e0ad
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Pass a local.Client to systray.Run, so we can use the existing global
localClient in the cmd/tailscale CLI. Add socket flag to cmd/systray.
Updates #1708
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This will start including the sytray app in unstable builds for Linux,
unless the `ts_omit_systray` build flag is specified.
If we decide not to include it in the v1.88 release, we can pull it
back out or restrict it to unstable builds.
Updates #1708
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This commit update the message for recommanding clear command after running serve for service.
Instead of a flag, we pass the service name as a parameter.
Fixestailscale/corp#30846
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Previously, we used a non-nil Location as an indicator that a peer is a Mullvad exit node.
However, this is not, or no longer, reliable, since regular exit nodes may also have a non-nil Location,
such as when traffic steering is enabled for a tailnet.
In this PR, we update the plaintext `tailscale status` output to omit only Mullvad exit nodes, rather than all
exit nodes with a non-nil Location. The JSON output remains unchanged and continues to include all peers.
Updates tailscale/corp#30614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Naman Sood
Alex Chan
Brad Fitzpatrick
M. J. Fromberger
James Tucker
Fran Bull
Mahyar Mirrashed
James Sanderson
Jordan Whited
Percy Wegmann
Esteban-Bermudez
Simon Law
nikiUppal-TS
Alex Chan
Mike O'Driscoll
Joe Tsai
Andrew Lytvynov
Claus Lensbøl
Will Norris
KevinLiang10
Danni Popova
Nick Khyl