It looks like this was left by mistake in 4a3e2842.
Change-Id: Ie4e3d5842548cd2e8533b3552298fb1ce9ba761a
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
To avoid annoying firewall dialogs on macOS and Windows, only run it
on Linux by default without the flag.
Change-Id: If8486c31d4243ade54b0131f673237c6c9184c08
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add an osImpl interface that can be stateful and thus more efficient
between calls. It will later be implemented by all OSes but for now
this change only adds a Linux implementation.
Remove Port.inode. It was only used by Linux and moves into its osImpl.
Don't reopen /proc/net/* files on each run. Turns out you can just
keep then open and seek to the beginning and reread and the contents
are fresh.
name old time/op new time/op delta
GetListIncremental-8 7.29ms ± 2% 6.53ms ± 1% -10.50% (p=0.000 n=9+9)
name old alloc/op new alloc/op delta
GetListIncremental-8 1.30kB ±13% 0.70kB ± 5% -46.38% (p=0.000 n=9+10)
name old allocs/op new allocs/op delta
GetListIncremental-8 33.2 ±11% 18.0 ± 0% -45.82% (p=0.000 n=9+10)
Updates #5958
Change-Id: I4be83463cbd23c2e2fa5d0bdf38560004f53401b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On Android, the system resolver can return IPv4 addresses as IPv6-mapped
addresses (i.e. `::ffff:a.b.c.d`). After the switch to `net/netip`
(19008a3), this case is no longer handled and a response like this will
be seen as failure to resolve any IPv4 addresses.
Handle this case by simply calling `Unmap()` on the returned IPs. Fixes#5698.
Signed-off-by: Peter Cai <peter@typeblog.net>
And respect envknob earlier. NewPoller has one caller and ignores
errors; they just signal ipnlocal to log a warning and not use the
portlist poller.
Change-Id: I4a33af936fe780cca8c7197d4d74ac31a1dc01e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The cute little salak belongs there. It also evens the odds if tails
start a mutiny against scales. Even though they outnumber scales, they
should still know their place. Behind.
Signed-off-by: Pontus Leitzler <leitzler@gmail.com>
name old time/op new time/op delta
GetList-8 11.2ms ± 5% 11.1ms ± 3% ~ (p=0.661 n=10+9)
name old alloc/op new alloc/op delta
GetList-8 83.3kB ± 1% 67.4kB ± 1% -19.05% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
GetList-8 2.89k ± 2% 2.19k ± 1% -24.24% (p=0.000 n=10+10)
(real issue is we're calling this code as much as we are, but easy
enough to make it efficient because it'll still need to be called
sometimes in any case)
Updates #5958
Change-Id: I90c20278d73e80315a840aed1397d24faa308d93
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make Linux parsePorts also an append-style API and attach it to
caller's provided append base memory.
And add a little string intern pool in front of the []byte to string
for inode names.
name old time/op new time/op delta
GetList-8 11.1ms ± 4% 9.8ms ± 6% -11.68% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
GetList-8 92.8kB ± 2% 79.7kB ± 0% -14.11% (p=0.000 n=10+9)
name old allocs/op new allocs/op delta
GetList-8 2.94k ± 1% 2.76k ± 0% -6.16% (p=0.000 n=10+10)
More coming. (the bulk of the allocations are in addProcesses and
filesystem operations, most of which we should usually be able to
skip)
Updates #5958
Change-Id: I3f0c03646d314a16fef7f8346aefa7d5c96701e7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Poller.C and Poller.c were duplicated for one caller. Add an accessor
returning the receive-only version instead. It'll inline.
Poller.Err was unused. Remove.
Then Poller is opaque.
The channel usage and shutdown was a bit sketchy. Clean it up.
And document some things.
Change-Id: I5669e54f51a6a13492cf5485c83133bda7ea3ce9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for reducing garbage, being able to reuse memory. So far this
doesn't actually reuse much. This is just changing signatures around.
But some improvement in any case:
bradfitz@tsdev:~/src/tailscale.com$ ~/go/bin/benchstat before after
name old time/op new time/op delta
GetList-8 11.8ms ± 9% 9.9ms ± 3% -15.98% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
GetList-8 99.5kB ± 2% 91.9kB ± 0% -7.62% (p=0.000 n=9+9)
name old allocs/op new allocs/op delta
GetList-8 3.05k ± 1% 2.93k ± 0% -3.83% (p=0.000 n=8+9)
More later, once parsers can reuse strings from previous parses.
Updates #5958
Change-Id: I76cd5048246dd24d11c4e263d8bb8041747fb2b0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's an internal implementation detail, and I plan to refactor it
for performance (garbage) reasons anyway, so start by hiding it.
Updates #5958
Change-Id: I2c0d1f743d3495c5f798d1d8afc364692cd9d290
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had previously added this to the netcheck report in #5087 but never
copied it into the NetInfo struct. Additionally, add it to log lines so
it's visible to support.
Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
By default all probes with the same probe interval that have been added
together will run on a synchronized schedule, which results in spiky
resource usage and potential throttling by third-party systems (for
example, OCSP servers used by the TLS probes).
To address this, prober can now run in "spread" mode that will
introduce a random delay before the first run of each probe.
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
What's better than getting a community request?
A community request from another Charlotte!
Bun and hops!
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Deleting may temporarily result in no addrs on the interface, which results in
all other rules (like routes) to get dropped by the OS.
I verified this fixes the problem.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Sets up new file for separate silent disco goroutine, tentatively named
pathfinder for now.
Updates #540
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Jenny Zhang <jz@tailscale.com>
During development of silent disco (#540), an alternate send policy
for magicsock that doesn't wake up the radio frequently with
heartbeats, we want the old & new policies to coexist, like we did
previously pre- and post-disco.
We started to do that earlier in 5c42990c2f but only set up the
env+control knob plumbing to set a bool about which path should be
used.
This starts to add a way for the silent disco code to update the send
path from a separate goroutine. (Part of the effort is going to
de-state-machinify the event based soup that is the current disco
code and make it more Go synchronous style.)
So far this does nothing. (It does add an atomic load on each send
but that should be noise in the grand scheme of things, and a even more
rare atomic store of nil on node config changes.)
Baby steps.
Updates #540
Co-authored-by: Jenny Zhang <jz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This ensures that each DERP server is probed individually (TLS and STUN)
and also manages per-region mesh probing. Actual probing code has been
copied from cmd/derpprobe.
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Months upon months I ponder about this,
Adding new words onto our little lists.
Given our integrity I should not have missed,
Including the creatures from folklore and myth.
Carefully curated, many of them hiss,
Don't forget about the ones hiding in the abyss.
Now they are added, I cannot resist,
Searching for more words for me to enlist.
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was unused in this repo. The Windows client used it, but it can move there.
Change-Id: I572816fd80cbbf1b8db734879b6280857d5bd2a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The ResolvConfMode property is documented to return how systemd-resolved
is currently managing /etc/resolv.conf. Include that information in the
debug line, when available, to assist in debugging DNS issues.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1ae3a257df1d318d0193a8c7f135c458ec45093e
The Lufthansa in-flight wifi generates a synthetic 204 response to the
DERP server's /generate_204 endpoint. This PR adds a basic
challenge/response to the endpoint; something sufficiently complicated
that it's unlikely to be implemented by a captive portal. We can then
check for the expected response to verify whether we're being MITM'd.
Follow-up to #5601
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f
Instead of treating any interface with a non-ifscope route as a
potential default gateway, now verify that a given route is
actually a default route (0.0.0.0/0 or ::/0).
Fixes#5879
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We removed it in #4806 in favor of the built-in functionality from the
nhooyr.io/websocket package. However, it has an issue with deadlines
that has not been fixed yet (see nhooyr/websocket#350). Temporarily
go back to using a custom wrapper (using the fix from our fork) so that
derpers will stop closing connections too aggressively.
Updates #5921
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Starting with #5946 we're compressing main.wasm when building the
package, but that should not show down the CI check.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Allows UI to display slightly more fine-grained progress when the SSH
connection is being established.
Updates tailscale/corp#7186
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Not currently used, but will allow us to usually remove a round-trip for
a future feature.
Updates #5972
Change-Id: I2770ea28e3e6ec9626d1cbb505a38ba51df7fba2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The wireguard-go code unfortunately calls this unconditionally
even when verbose logging is disabled.
Partial revert of #5911.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Duplicating this at each layer doesnt make any sense, and is another
invariant where things could go wrong.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Before this would silently fail if this program was running on a machine
that was not already running Tailscale. This patch changes the WhoIs
call to use the tsnet.Server LocalClient instead of the global tailscale
LocalClient.
Signed-off-by: Xe <xe@tailscale.com>
Signed-off-by: Xe <xe@tailscale.com>
This package parses a JSON stream of netlog.Message from os.Stdin
and pretty prints the contents as a stream of tables.
It supports reverse lookup of tailscale IP addresses if given
an API key and the tailnet that these traffic logs belong to.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This field seems seldom used and the documentation is wrong.
It is simpler to just derive its original value dynamically
when endpoint.DstToString is called.
This method is potentially used by wireguard-go,
but not in any code path is performance sensitive.
All calls to it use it in conjunction with fmt.Printf,
which is going to be slow anyways since it uses Go reflection.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Maisem Ali
Andrew Dunham
Mihai Parparita
Denton Gentry
Brad Fitzpatrick
Peter Cai
Pontus Leitzler
Will Norris
Anton Tolchanov
Charlotte Brandhorst-Satzkorn
phirework
Andrew Dunham
Maya Kaczorowski
License Updater
Joe Tsai
Tom DNetto
Xe Iaso
dependabot[bot]