This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This was previously disabled in 8e42510 due to missing GSO-awareness in
tstun, which was resolved in d097096.
Updates tailscale/corp#22511
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The bad naming (which had only been half updated with the IPv6
changes) tripped me up in the earlier change.
Updates #13038
Change-Id: I65ce07c167e8219d35b87e1f4bf61aab4cac31ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The reason they weren't working was because the cmd/tta agent in the
guest was dialing out to the test and the vnet couldn't map its global
unicast IPv6 address to a node as it was just using a
map[netip.Addr]*node and blindly trusting the *node was
populated. Instead, it was nil, so the agent connection fetching
didn't work for its RoundTripper and the test could never drive the
node. That map worked for IPv4 but for IPv6 we need to use the method
that takes into account the node's IPv6 SLAAC address. Most call sites
had been converted but I'd missed that one.
Also clean up some debug, and prohibit nodes' link-local unicast
addresses from dialing 2000::/3 directly for now. We can allow that to
be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's
called.) That mode was working on accident, but was confusing: Linux
would do source address selection from link local for the first few
seconds and then after SLAAC and DAD, switch to using the global
unicast source address. Be consistent for now and force it to use the
global unicast.
Updates #13038
Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Really we need to fix logpolicy + bootstrapDNS to not be so aggressive,
but this is a quick workaround meanwhile.
Without this, tailscaled starts immediately while IPv6 DAD is
happening for a couple seconds and logpolicy freaks out without the
network available and starts spamming stderr about bootstrap DNS
options. But we see that regularly anyway from people whose wifi is
down. So we need to fix the general case. This is not that fix.
Updates #13038
Change-Id: Iba7e536d08e59d34abded1d279f88fdc9c46d94d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There were a few places it could get wedged (notably the dial without
a timeout).
And add a knob for verbose debug logs.
And keep two idle connections always.
Updates #13038
Change-Id: I952ad182d7111481d97a83c12aa2ff4bfdc55fe8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move all the UDP handling to its own func to remove a bunch of "if
isUDP" checks in a bunch of blocks.
Updates #13038
Change-Id: If71d71b49e57651d15bd307a2233c43751cc8639
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't actually see this, but added this while debugging something
and figured it'd be good to keep.
Updates #13038
Change-Id: I67934c8a329e0233f79c3b08516fd6bad6bfe22a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On a major link change the LAN routes may change, so on linkChange where
ChangeDelta.Major, we need to call authReconfig to ensure that new
routes are observed and applied.
Updates tailscale/corp#22574
Signed-off-by: James Tucker <james@tailscale.com>
This is the equivalent of quad-100, but for IPv6. This is technically
already contained in the Tailscale IPv6 ULA prefix, but that is only
installed when remote peers are visible via control with contained
addrs. The service addr should always be reachable.
Updates #1152
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And sprinkle some more docs around.
Updates #13038
Change-Id: Ia2dcf567b68170481cc2094d64b085c6b94a778a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have several checked type assertions to *types.Named in both cmd/cloner and cmd/viewer.
As Go 1.23 updates the go/types package to produce Alias type nodes for type aliases,
these type assertions no longer work as expected unless the new behavior is disabled
with gotypesalias=0.
In this PR, we add codegen.NamedTypeOf(t types.Type), which functions like t.(*types.Named)
but also unrolls type aliases. We then use it in place of type assertions in the cmd/cloner and
cmd/viewer packages where appropriate.
We also update type switches to include *types.Alias alongside *types.Named in relevant cases,
remove *types.Struct cases when switching on types.Type.Underlying and update the tests
with more cases where type aliases can be used.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Go 1.23 updates the go/types package to produce Alias type nodes for type aliases, unless disabled with gotypesalias=0.
This new default behavior breaks codegen.LookupMethod, which uses checked type assertions to types.Named and
types.Interface, as only named types and interfaces have methods.
In this PR, we update codegen.LookupMethod to perform method lookup on the right-hand side of the alias declaration
and clearly switch on the supported type nodes types. We also improve support for various edge cases, such as when an alias
is used as a type parameter constraint, and add tests for the LookupMethod function.
Additionally, we update cmd/viewer/tests to include types with aliases used in type fields and generic type constraints.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
All the magic service names with virtual IPs will need IPv6 variants.
Pull this out in prep.
Updates #13038
Change-Id: I53b5eebd0679f9fa43dc0674805049258c83a0de
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we don't log about them when verbose logging is enabled.
Updates #13038
Change-Id: I925bc3a23e6c93d60dd4fb4bf6a4fdc5a326de95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The natlab Test Agent (tta) still had its old log streaming hack in
place where it dialed out to anything on TCP port 124 and those logs
were streamed to the host running the tests. But we'd since added gokrazy
syslog streaming support, which made that redundant.
So remove all the port 124 stuff. And then make sure we log to stderr
so gokrazy logs it to syslog.
Also, keep the first 1MB of logs in memory in tta too, exported via
localhost:8034/logs for interactive debugging. That was very useful
during debugging when I added IPv6 support. (which is coming in future
PRs)
Updates #13038
Change-Id: Ieed904a704410b9031d5fd5f014a73412348fa7f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise you get "Access denied: watch IPN bus access denied, must
set ipn.NotifyNoPrivateKeys when not running as admin/root or
operator".
This lets a non-operator at least start the app and see the status, even
if they can't change everything. (the web UI is unaffected by operator)
A future change can add a LocalAPI call to check permissions and guide
people through adding a user as an operator (perhaps the web client
can do that?)
Updates #1708
Change-Id: I699e035a251b4ebe14385102d5e7a2993424c4b7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a systray app for linux, similar to the apps for macOS and
windows. There are already a number of community-developed systray apps,
but most of them are either long abandoned, are built for a specific
desktop environment, or simply wrap the tailscale CLI.
This uses fyne.io/systray (a fork of github.com/getlantern/systray)
which uses newer D-Bus specifications to render the tray icon and menu.
This results in a pretty broad support for modern desktop environments.
This initial commit lacks a number of features like profile switching,
device listing, and exit node selection. This is really focused on the
application structure, the interaction with LocalAPI, and some system
integration pieces like the app icon, notifications, and the clipboard.
Updates #1708
Signed-off-by: Will Norris <will@tailscale.com>
updates tailcale/corp#22371
For dgram mode, we need to store the write addresses of
the client socket(s) alongside the writer functions and
the write operation needs to use WriteToUnix.
Unix also has multiple clients writing to the same socket,
so the serve method is modified to handle packets from
multiple mac addresses.
Cleans up a bit of cruft from the initial tailmac tooling
commit.
Now all the macOS packets are belong to us.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
After the upstream PR is merged, we can point directly at github.com/vishvananda/netlink
and retire github.com/tailscale/netlink.
See https://github.com/vishvananda/netlink/pull/1006
Updates #12298
Signed-off-by: Percy Wegmann <percy@tailscale.com>
And convert a few callers as an example, but nowhere near all.
Updates #12912
Change-Id: I5eaa12a29a6cd03b58d6f1072bd27bc0467852f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid dig vs nslookup vs $X availability issues between
OSes/distros. And to be in Go, to match the resolver we use.
Updates #13038
Change-Id: Ib7e5c351ed36b5470a42cbc230b8f27eed9a1bf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
net/tstun.Wrapper.InjectInboundPacketBuffer is not GSO-aware, which can
break quad-100 TCP streams as a result. Linux is the only platform where
gVisor GSO was previously enabled.
Updates tailscale/corp#22511
Updates #13211
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Instead of changing the working directory before launching the incubator process,
this now just changes the working directory after dropping privileges, at which
point we're more likely to be able to enter the user's home directory since we're
running as the user.
For paths that use the 'login' or 'su -l' commands, those already take care of changing
the working directory to the user's home directory.
Fixes#13120
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This adds a new package containing generic types to be used for defining preference hierarchies.
These include prefs.Item, prefs.List, prefs.StructList, and prefs.StructMap. Each of these types
represents a configurable preference, holding the preference's state, value, and metadata.
The metadata includes the default value (if it differs from the zero value of the Go type)
and flags indicating whether a preference is managed via syspolicy or is hidden/read-only for
another reason. This information can be marshaled and sent to the GUI, CLI and web clients
as a source of truth regarding preference configuration, management, and visibility/mutability states.
We plan to use these types to define device preferences, such as the updater preferences,
the permission mode to be used on Windows with #tailscale/corp#18342, and certain global options
that are currently exposed as tailscaled flags. We also aim to eventually use these types for
profile-local preferences in ipn.Prefs and and as a replacement for ipn.MaskedPrefs.
The generic preference types are compatible with the tailscale.com/cmd/viewer and
tailscale.com/cmd/cloner utilities.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In Tailnet Lock, there is an implicit limit on the number of rotation
signatures that can be chained before the signature becomes too long.
This program helps tailnet admins to identify nodes that have signatures
with long chains and prints commands to re-sign those node keys with a
fresh direct signature. It's a temporary mitigation measure, and we will
remove this tool as we design and implement a long-term approach for
rotation signatures.
Example output:
```
2024/08/20 18:25:03 Self: does not need re-signing
2024/08/20 18:25:03 Visible peers with valid signatures:
2024/08/20 18:25:03 Peer xxx2.yy.ts.net. (100.77.192.34) nodeid=nyDmhiZiGA11KTM59, current signature kind=direct: does not need re-signing
2024/08/20 18:25:03 Peer xxx3.yy.ts.net. (100.84.248.22) nodeid=ndQ64mDnaB11KTM59, current signature kind=direct: does not need re-signing
2024/08/20 18:25:03 Peer xxx4.yy.ts.net. (100.85.253.53) nodeid=nmZfVygzkB21KTM59, current signature kind=rotation: chain length 4, printing command to re-sign
tailscale lock sign nodekey:530bddbfbe69e91fe15758a1d6ead5337aa6307e55ac92dafad3794f8b3fc661 tlpub:4bf07597336703395f2149dce88e7c50dd8694ab5bbde3d7c2a1c7b3e231a3c2
```
To support this, the NetworkLockStatus localapi response now includes
information about signatures of all peers rather than just the invalid
ones. This is not displayed by default in `tailscale lock status`, but
will be surfaced in `tailscale lock status --json`.
Updates #13185
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This involved the following:
1. Pass the su command path as first of args in call to unix.Exec to make sure that busybox sees the correct program name.
Busybox is a single executable userspace that implements various core userspace commands in a single binary. You'll
see it used via symlinking, so that for example /bin/su symlinks to /bin/busybox. Busybox knows that you're trying
to execute /bin/su because argv[0] is '/bin/su'. When we called unix.Exec, we weren't including the program name for
argv[0], which caused busybox to fail with 'applet not found', meaning that it didn't know which command it was
supposed to run.
2. Tell su to whitelist the SSH_AUTH_SOCK environment variable in order to support ssh agent forwarding.
3. Run integration tests on alpine, which uses busybox.
4. Increment CurrentCapabilityVersion to allow turning on SSH V2 behavior from control.
Fixes#12849
Signed-off-by: Percy Wegmann <percy@tailscale.com>
In df6014f1d7 we removed build tag
gating preventing importation, which tripped a NetworkExtension limit
test in corp. This was a reversal of
25f0a3fc8f which actually made the
situation worse, hence the simplification.
This commit goes back to the strategy in
25f0a3fc8f, and gets us back under the
limit in my local testing. Admittedly, we don't fully understand
the effects of importing or excluding importation of this package,
and have seen mixed results, but this commit allows us to move forward
again.
Updates tailscale/corp#22125
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In 2f27319baf we disabled GRO due to a
data race around concurrent calls to tstun.Wrapper.Write(). This commit
refactors GRO to be thread-safe, and re-enables it on Linux.
This refactor now carries a GRO type across tstun and netstack APIs
with a lifetime that is scoped to a single tstun.Wrapper.Write() call.
In 25f0a3fc8f we used build tags to
prevent importation of gVisor's GRO package on iOS as at the time we
believed it was contributing to additional memory usage on that
platform. It wasn't, so this commit simplifies and removes those
build tags.
Updates tailscale/corp#22353
Updates tailscale/corp#22125
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Kristoffer Dalby
Jordan Whited
Brad Fitzpatrick
Will Norris
James Tucker
Maisem Ali
Nick Khyl
Flakes Updater
Jonathan Nobels
Percy Wegmann
Ilarion Kovalchuk
Anton Tolchanov
ChandonPierre
Aaron Klotz