General cleanup and additional test coverage of WIP code.
* use enum for serveType
* combine instances of ServeConfig access within unset
* cleanMountPoint rewritten into cleanURLPath as it only handles URL paths
* refactor and test expandProxyTargetDev
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
(continuing the mission of removing rando methods from the Engine
interface that we don't need anymore)
Updates #cleanup
Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We always have one. Stop pretending we might not.
Instead, add one early panic in NewLocalBackend if we actually don't.
Updates #cleanup
Change-Id: Iba4b78ed22cb6248e59c2b01a79355ca7a200ec8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was only used by Android, until
https://github.com/tailscale/tailscale-android/pull/131
which does the call to the netMon directly instead.
Updates #cleanup
Change-Id: Iab8a1d8f1e63250705835c75f40e2cd8c1c4d5b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend can talk to magicsock on its own to do this without
the "Engine" being involved.
(Continuing a little side quest of cleaning up the Engine
interface...)
Updates #cleanup
Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This logs that the gateway/self IP address has changed if one of the new
values differs.
Updates #8992
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0919424b68ad97fbe1204dd36317ed6f5915411f
I missed this in 343c0f1031 and I guess we don't have integration
tests for wasm. But it compiled! :)
Updates #fixup to a #cleanup
Change-Id: If147b90bab254d144ec851a392e8db10ab97f98e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new integration test with two nodes where the first gets a
incremental MapResponse (with only PeersRemoved set) saying that the
second node disappeared.
This extends the testcontrol package to support sending raw
MapResponses to nodes.
Updates #1909
Change-Id: Iea0c25c19cf0d72b52dba5a46d01b5cc87b9b39d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
DSM6 does not automatically restart packages on install, we have to do
it explicitly.
Also, DSM6 has a filter for publishers in Package Center. Make the error
message more helpful when update fails because of this filter not
allowing our package.
Fixes#9361
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Some routers don't support lease times for UPnP portmapping; let's fall
back to adding a permanent lease in these cases. Additionally, add a
proper end-to-end test case for the UPnP portmapping behaviour.
Updates #9343
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I17dec600b0595a5bfc9b4d530aff6ee3109a8b12
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR adds optimistic concurrency control in the local client and
api in order to ensure multiple writes of the ServeConfig do not
conflict with each other.
Updates #9273
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We're trying to start using that monster type less and eventually get
rid of it.
Updates #1909
Change-Id: I8e1e725bce5324fb820a9be6c7952767863e6542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I guess we missed this one earlier when we unified the various
copies into set.HandleSet.
Updates #cleanup
Change-Id: I7e6de9ce16e8fc4846abf384dfcc8eaec4d99e60
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is both more efficient (because the knobs' bool is only updated
whenever Node is changed, rarely) and also gets us one step closer to
removing a case of storing a netmap.NetworkMap in
magicsock. (eventually we want to phase out much of the use of that
type internally)
Updates #1909
Change-Id: I37e81789f94133175064fdc09984e4f3a431f1a1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for incremental netmap update plumbing (#1909), make peerMap
also keyed by NodeID, as all the netmap node mutations passed around
later will be keyed by NodeID.
In the process, also:
* add envknob.InDevMode, as a signal that we can panic more aggressively
in unexpected cases.
* pull two moderately large blocks of code in Conn.SetNetworkMap out
into their own methods
* convert a few more sets from maps to set.Set
Updates #1909
Change-Id: I7acdd64452ba58e9d554140ee7a8760f9043f961
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sometimes `go test` would exit and close its stdout before we started reading
it, and we would return that "file closed" error then forget to os.Exit(1).
Fixed to prefer the go test subprocess error and exit regardless of the type of
error.
Fixes#9334
Signed-off-by: Paul Scott <paul@tailscale.com>
If the user's running "go test" by hand, no need to spam stderr with
the sentinel marker. It already calls t.Logf (which only gets output
on actual failure, or verbose mode) which is enough to tell users it's
known flaky. Stderr OTOH always prints out and is distracting to
manual "go test" users.
Updates #cleanup
Change-Id: Ie5e6881bae291787c30f75924fa132f4a28abbb2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's been implicitly enabled (based on capver) for years.
Updates #cleanup
Change-Id: I8ff1ab844f9ed75c97e866e778dfc0b56cfa98a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR ensures calls to the LocalBackend are not happening
multiples times and ensures the set/unset methods are
only manipulating the serve config
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet. I just converted the relatively awkward struct{}-valued
maps.
Updates #cleanup
Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For use in tsweb debug handlers, so that we can easily inspect cache
and limiter state when troubleshooting.
Updates tailscale/corp#3601
Signed-off-by: David Anderson <danderson@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Log some progress info to make updates more debuggable. Also, track
whether an active update is already started and return an error if
a concurrent update is attempted.
Some planned future PRs:
* add JSON output to `tailscale update`
* use JSON output from `tailscale update` to provide a more detailed
status of in-progress update (stage, download progress, etc)
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
A #cleanup that moves all frontend asset handling into assets.go
(formerly dev.go), and stores a single assetsHandler field back
to web.Server that manages when to serve the dev vite proxy versus
static files itself.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously, foreground mode only worked in the simple case of `tailscale funnel <port>`.
This PR ensures that whatever you can do in the background can also be
done in the foreground such as setting mount paths or tcp forwarding.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
pre-generics container/list is quite unpleasant to use, and the pointer
manipulation operations for an LRU are simple enough to implement directly
now that we have generic types.
With this change, the LRU uses a ring (aka circularly linked list) rather
than a simple doubly-linked list as its internals, because the ring makes
list manipulation edge cases more regular: the only remaining edge case is
the transition between 0 and 1 elements, rather than also having to deal
specially with manipulating the first and last members of the list.
While the primary purpose was improved readability of the code, as it
turns out removing the indirection through an interface box also speeds
up the LRU:
│ before.txt │ after.txt │
│ sec/op │ sec/op vs base │
LRU-32 67.05n ± 2% 59.73n ± 2% -10.90% (p=0.000 n=20)
│ before.txt │ after.txt │
│ B/op │ B/op vs base │
LRU-32 21.00 ± 0% 10.00 ± 0% -52.38% (p=0.000 n=20)
│ before.txt │ after.txt │
│ allocs/op │ allocs/op vs base │
LRU-32 0.000 ± 0% 0.000 ± 0% ~ (p=1.000 n=20) ¹
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
The benchmark simulates an LRU being queries with uniformly random
inputs, in a set that's too large for the LRU, which should stress
the eviction codepath.
Signed-off-by: David Anderson <danderson@tailscale.com>
> **Note**
> Behind the `TAILSCALE_FUNNEL_DEV` flag
* Expose additional listeners through flags
* Add a --bg flag to run in the background
* --set-path to set a path for a specific target (assumes running in background)
See the parent issue for more context.
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Will Norris
Tyler Smalley
Brad Fitzpatrick
Andrew Dunham
License Updater
David Crawshaw
Andrew Lytvynov
Marwan Sulaiman
Paul Scott
David Anderson
Sonia Appasamy
Joe Tsai
Craig Rodrigues
Maisem Ali