* cmd/tailscale/cli: Add service flag to serve command
This commit adds the service flag to serve command which allows serving a service and add the service
to the advertisedServices field in prefs (What advertise command does that will be removed later).
When adding proxies, TCP proxies and WEB proxies work the same way as normal serve, just under a
different DNSname. There is a services specific L3 serving mode called Tun, can be set via --tun flag.
Serving a service is always in --bg mode. If --bg is explicitly set t o false, an error message will
be sent out. The restriction on proxy target being localhost or 127.0.0.1 also applies to services.
When removing proxies, TCP proxies can be removed with type and port flag and off argument. Web proxies
can be removed with type, port, setPath flag and off argument. To align with normal serve, when setPath
is not set, all handler under the hostport will be removed. When flags are not set but off argument was
passed by user, it will be a noop. Removing all config for a service will be available later with a new
subcommand clear.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: fix ai comments and fix a test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Add a test for addServiceToPrefs
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: fix comment
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add dnsName in error message
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* change the cli input flag variable type
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace FindServiceConfig with map lookup
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* some code simplification and add asServiceName
This commit cotains code simplification for IsServingHTTPS, SetWebHandler, SetTCPForwarding
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace IsServiceName with tailcfg.AsServiceName
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace all assemble of host name for service with strings.Join
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: adjust parameter order and update output message
This commit updates the parameter order for IsTCPForwardingOnPort and SetWebHandler.
Also updated the message msgServiceIPNotAssigned to msgServiceWaitingApproval to adapt to
latest terminologies around services.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: flip bool condition
This commit fixes a previous bug added that throws error when serve funnel without service.
It should've been the opposite, which throws error when serve funnel with service.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: change parameter of IsTCPForwardingOnPort
This commit changes the dnsName string parameter for IsTCPForwardingOnPort to
svcName tailcfg.ServiceName. This change is made to reduce ambiguity when
a single service might have different dnsNames
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn/ipnlocal: replace the key to webHandler for services
This commit changes the way we get the webhandler for vipServices. It used to use the host name
from request to find the webHandler, now everything targeting the vipService IP have the same
set of handlers. This commit also stores service:port instead of FQDN:port as the key in serviceConfig
for Web map.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Updated use of service name.
This commit removes serviceName.IsEmpty and use direct comparison to instead. In legacy code, when an empty service
name needs to be passed, a new constant noService is passed. Removed redundant code for checking service name validity
and string method for serviceNameFlag.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Update bgBoolFlag
This commit update field name, set and string method of bgBoolFlag to make code cleaner.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: remove isDefaultService output from srvTypeAndPortFromFlags
This commit removes the isDefaultService out put as it's no longer needed. Also deleted redundant code.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: remove unnessesary variable declare in messageForPort
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace bool output for AsServiceName with err
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Replace DNSName with NoService if DNSname only used to identify service
This commit moves noService constant to tailcfg, updates AsServiceName to return tailcfg.NoService if the input
is not a valid service name. This commit also removes using the local DNSName as scvName parameter. When a function
is only using DNSName to identify if it's working with a service, the input in replaced with svcName and expect
caller to pass tailcfg.NoService if it's a local serve. This commit also replaces some use of Sprintf with
net.JoinHostPort for ipn.HostPort creation.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Remove the returned error for AsServiceName
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* apply suggested code and comment
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace local dnsName in test with tailcfg.NoService
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: move noService back and use else where
The constant serves the purpose of provide readability for passing as a function parameter. It's
more meaningful comparing to a . It can just be an empty string in other places.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn: Make WebHandlerExists and RemoveTCPForwarding accept svcName
This commit replaces two functions' string input with svcName input since they only use the dnsName to
identify service. Also did some minor cleanups
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
With auto exit nodes enabled, the client picks exit nodes from the
ones advertised in the network map. Usually, it picks the one with the
highest priority score, but when the top spot is tied, it used to pick
randomly. Then, once it made a selection, it would strongly prefer to
stick with that exit node. It wouldn’t even consider another exit node
unless the client was shutdown or the exit node went offline. This is
to prevent flapping, where a client constantly chooses a different
random exit node.
The major problem with this algorithm is that new exit nodes don’t get
selected as often as they should. In fact, they wouldn’t even move
over if a higher scoring exit node appeared.
Let’s say that you have an exit node and it’s overloaded. So you spin
up a new exit node, right beside your existing one, in the hopes that
the traffic will be split across them. But since the client had this
strong affinity, they stick with the exit node they know and love.
Using rendezvous hashing, we can have different clients spread
their selections equally across their top scoring exit nodes. When an
exit node shuts down, its clients will spread themselves evenly to
their other equal options. When an exit node starts, a proportional
number of clients will migrate to their new best option.
Read more: https://en.wikipedia.org/wiki/Rendezvous_hashing
The trade-off is that starting up a new exit node may cause some
clients to move over, interrupting their existing network connections.
So this change is only enabled for tailnets with `traffic-steering`
enabled.
Updates tailscale/corp#29966
Fixes#16551
Signed-off-by: Simon Law <sfllaw@tailscale.com>
@nickkyl added an peer.Online check to suggestExitNodeUsingDERP, so it
should also check when running suggestExitNodeUsingTrafficSteering.
Updates tailscale/corp#29966
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Thanks to @nickkhyl for pointing out that NetMap.Peers doesn’t get
incremental updates since the last full NetMap update. Instead, he
recommends using ipn/ipnlocal.nodeBackend.AppendMatchingPeers.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When `tailscale exit-node suggest` contacts the LocalAPI for a
suggested exit node, the client consults its netmap for peers that
contain the `suggest-exit-node` peercap. It currently uses a series of
heuristics to determine the exit node to suggest.
When the `traffic-steering` feature flag is enabled on its tailnet,
the client will defer to Control’s priority scores for a particular
peer. These scores, in `tailcfg.Hostinfo.Location.Priority`, were
historically only used for Mullvad exit nodes, but they have now been
extended to score any peer that could host a redundant resource.
Client capability version 119 is the earliest client that understands
these traffic steering scores. Control tells the client to switch to
rely on these scores by adding `tailcfg.NodeAttrTrafficSteering` to
its `AllCaps`.
Updates tailscale/corp#29966
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Updates the output for "tailscale ping" to indicate if a peer relay was traversed, just like the output for DERP or direct connections.
Fixestailscale/corp#30034
Signed-off-by: Dylan Bargatze <dylan@tailscale.com>
Errors were mashalled without the correct newlines. Also, they could
generally be mashalled with more data, so an intermediate was introduced
to make them slightly nicer to look at.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
If the GUI receives a new exit node ID before the new netmap, it may treat the node as offline or invalid
if the previous netmap didn't include the peer at all, or if the peer was offline or not advertised as an exit node.
This may result in briefly issuing and dismissing a warning, or a similar issue, which isn't ideal.
In this PR, we change the operation order to send the new netmap to clients first before selecting the new exit node
and notifying them of the Exit Node change.
Updates tailscale/corp#30252 (an old issue discovered during testing this)
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already check this for cases where ipn.Prefs.AutoExitNode is configured via syspolicy.
Configuring it directly through EditPrefs should behave the same, so we add a test for that as well.
Additionally, we clarify the implementation and future extensibility in (*LocalBackend).resolveAutoExitNodeLocked,
where the AutoExitNode is actually enforced.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
So it can be used from the CLI without importing ipnlocal.
While there, also remove isAutoExitNodeID, a wrapper around parseAutoExitNodeID
that's no longer used.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When the policy setting is enabled, it allows users to override the exit node enforced by the ExitNodeID
or ExitNodeIP policy. It's primarily intended for use when ExitNodeID is set to auto:any, but it can also
be used with specific exit nodes. It does not allow disabling exit node usage entirely.
Once the exit node policy is overridden, it will not be enforced again until the policy changes,
the user connects or disconnects Tailscale, switches profiles, or disables the override.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that applySysPolicy is only called by (*LocalBackend).reconcilePrefsLocked,
we can make it a method to avoid passing state via parameters and to support
future extensibility.
Also factor out exit node-specific logic into applyExitNodeSysPolicyLocked.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that resolveExitNodeInPrefsLocked is the only caller of setExitNodeID,
and setExitNodeID is the only caller of resolveExitNodeIP, we can restructure
the code with resolveExitNodeInPrefsLocked now calling both
resolveAutoExitNodeLocked and resolveExitNodeIPLocked directly.
This prepares for factoring out resolveAutoExitNodeLocked and related
auto-exit-node logic into an ipnext extension in a future commit.
While there, we also update exit node by IP lookup to use (*nodeBackend).NodeByAddr
and (*nodeBackend).NodeByID instead of iterating over all peers in the most recent netmap.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we start passing a LocalAPI actor to (*LocalBackend).Logout to make it subject
to the same access check as disconnects made via tailscale down or the GUI.
We then update the CLI to allow `tailscale logout` to accept a reason, similar to `tailscale down`.
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We extract checkEditPrefsAccessLocked, adjustEditPrefsLocked, and onEditPrefsLocked from the EditPrefs
execution path, defining when each step is performed and what behavior is allowed at each stage.
Currently, this is primarily used to support Always On mode, to handle the Exit Node enablement toggle,
and to report prefs edit metrics.
We then use it to enforce Exit Node policy settings by preventing users from setting an exit node
and making EditPrefs return an error when an exit node is restricted by policy. This enforcement is also
extended to the Exit Node toggle.
These changes prepare for supporting Exit Node overrides when permitted by policy and preventing logout
while Always On mode is enabled.
In the future, implementation of these methods can be delegated to ipnext extensions via the feature hooks.
Updates tailscale/corp#29969
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We have several places where we call applySysPolicy, suggestExitNodeLocked, and setExitNodeID.
While there are cases where we want to resolve the exit node specifically, such as when network
conditions change or a new netmap is received, we typically need to perform all three steps.
For example, enforcing policy settings may enable auto exit nodes or set an ExitNodeIP,
which in turn requires picking a suggested exit node or resolving the IP to an ID, respectively.
In this PR, we introduce (*LocalBackend).resolveExitNodeInPrefsLocked and (*LocalBackend).reconcilePrefsLocked,
with the latter calling both applySysPolicy and resolveExitNodeInPrefsLocked.
Consolidating these steps into a single extensibility point would also make it easier to support
future hooks registered by ipnext extensions.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we update setExitNodeID to retain the existing exit node if auto exit node is enabled,
the current exit node is allowed by policy, and no suggested exit node is available yet.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that (*LocalBackend).suggestExitNodeLocked is never called with a non-current netmap
(the netMap parameter is always nil, indicating that the current netmap should be used),
we can remove the unused parameter.
Additionally, instead of suggestExitNodeLocked passing the most recent full netmap to suggestExitNode,
we now pass the current nodeBackend so it can access peers with delta updates applied.
Finally, with that fixed, we no longer need to skip TestUpdateNetmapDeltaAutoExitNode.
Updates tailscale/corp#29969
Fixes#16455
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we add (*LocalBackend).RefreshExitNode which determines which exit node
to use based on the current prefs and netmap and switches to it if needed. It supports
both scenarios when an exit node is specified by IP (rather than ID) and needs to be resolved
once the netmap is ready as well as auto exit nodes.
We then use it in (*LocalBackend).SetControlClientStatus when the netmap changes,
and wherever (*LocalBackend).pickNewAutoExitNode was previously used.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
With this change, policy enforcement and exit node resolution can happen in separate steps,
since enforcement no longer depends on resolving the suggested exit node. This keeps policy
enforcement synchronous (e.g., when switching profiles), while allowing exit node resolution
to be asynchronous on netmap updates, link changes, etc.
Additionally, the new preference will be used to let GUIs and CLIs switch back to "auto" mode
after a manual exit node override, which is necessary for tailscale/corp#29969.
Updates tailscale/corp#29969
Updates #16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
TestSetControlClientStatusAutoExitNode is broken similarly to TestUpdateNetmapDeltaAutoExitNode
as suggestExitNode didn't previously check the online status of exit nodes, and similarly to the other test
it succeeded because the test itself is also broken.
However, it is easier to fix as it sends out a full netmap update rather than a delta peer update,
so it doesn't depend on the same refactoring as TestSetControlClientStatusAutoExitNode.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
suggestExitNode never checks whether an exit node candidate is online.
It also accepts a full netmap, which doesn't include changes from delta updates.
The test can't work correctly until both issues are fixed.
Previously, it passed only because the test itself is flawed.
It doesn't succeed because the currently selected node goes offline and a new one is chosen.
Instead, it succeeds because lastSuggestedExitNode is incorrect, and suggestExitNode picks
the correct node the first time it runs, based on the DERP map and the netcheck report.
The node in exitNodeIDWant just happens to be the optimal choice.
Fixing SuggestExitNode requires refactoring its callers first, which in turn reveals the flawed test,
as suggestExitNode ends up being called slightly earlier.
In this PR, we update the test to correctly fail due to existing bugs in SuggestExitNode,
and temporarily skip it until those issues are addressed in a future commit.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
(*profileManager).CurrentPrefs() is always valid. Additionally, there's no value in cloning
and passing the full ipn.Prefs when editing preferences. Instead, ipn.MaskedPrefs should
only have ExitNodeID set.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, (*LocalBackend).pickNewAutoExitNode() is just a wrapper around
setAutoExitNodeIDLockedOnEntry that sends a prefs-change notification at the end.
It doesn't need to do that, since setPrefsLockedOnEntry already sends the notification
(setAutoExitNodeIDLockedOnEntry calls it via editPrefsLockedOnEntry).
This PR removes the old pickNewAutoExitNode function and renames
setAutoExitNodeIDLockedOnEntry to pickNewAutoExitNode for clarity.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Report whether the client is configured with state encryption (which
varies by platform and can be optional on some). Wire it up to
`--encrypt-state` in tailscaled, which is set for Linux/Windows, and set
defaults for other platforms. Macsys will also report this if full
Keychain migration is done.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
We would like to start sending whether a node is a Tailnet owner in netmap responses so that clients can determine what information to display to a user who wants to request account deletion.
Updates tailscale/corp#30016
Signed-off-by: kari-ts <kari@tailscale.com>
Instead of calculating the PeerAPI URL at the time that we add the peer,
we now calculate it on every access to the peer. This way, if we
initially did not have a shared address family with the peer, but
later do, this allows us to access the peer at that point. This
follows the pattern from other places where we access the peer API,
which also calculate the URL on an as-needed basis.
Additionally, we now show peers as not Available when we can't get
a peer API URL.
Lastly, this moves some of the more frequent verbose Taildrive logging
from [v1] to [v2] level.
Updates #29702
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This allows logging the following Taildrive behavior from the client's perspective
when --verbose=1:
- Initialization of Taildrive remotes for every peer
- Peer availability checks
- All HTTP requests to peers (not just GET and PUT)
Updates tailscale/corp#29702
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This method is only needed to migrate between store.FileStore and
tpm.tpmStore. We can make a runtime type assertion instead of
implementing an unused method for every platform.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add a new `--encrypt-state` flag to `cmd/tailscaled`. Based on that
flag, migrate the existing state file to/from encrypted format if
needed.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
nodeBackend now publishes filter and node changes to eventbus topics
that are consumed by magicsock.Conn
Updates tailscale/corp#27502
Updates tailscale/corp#29543
Signed-off-by: Jordan Whited <jordan@tailscale.com>
We update LocalBackend to shut down the current nodeBackend
when switching to a different node, and to mark the new node's
nodeBackend as ready when the switch completes.
Updates tailscale/corp#28014
Updates tailscale/corp#29543
Updates #12614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already present a health warning about this, but it is easy to miss
on a server when blackholing traffic makes it unreachable.
In addition to a health warning, present a risk message when exit node
is enabled.
Example:
```
$ tailscale up --exit-node=lizard
The following issues on your machine will likely make usage of exit nodes impossible:
- interface "ens4" has strict reverse-path filtering enabled
- interface "tailscale0" has strict reverse-path filtering enabled
Please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
To skip this warning, use --accept-risk=linux-strict-rp-filter
$
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This commit fixes the bug that c2n requests are skiped when updating vipServices in serveConfig. This then resulted
netmap update being skipped which caused inaccuracy of Capmap info on client side. After this fix, client always
inform control about it's vipServices config changes.
Fixestailscale/corp#29219
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
KevinLiang10
Simon Law
Jordan Whited
Dylan Bargatze
Claus Lensbøl
Nick Khyl
Andrew Lytvynov
kari-ts
Percy Wegmann
JerryYan
Anton Tolchanov
Juan Francisco Cantero Hurtado
Brad Fitzpatrick
James Sanderson