For tests.
Now that we can always listen (whereas we used to fail prior to
a2c330c496), some goroutine leak
checks were failing in tests in another repo after that change.
Change-Id: Id95a4b71167eca61962a48616d79741b9991e0bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The previous commit (1b89662eff) this for Android, but we can also use
this on any platform if we we would otherwise fail.
Change-Id: I4cd78b40e9e77fca5cc8e717dd48ac173101bed4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We intercept the peerapi port in netstack anyway, so there's no reason
the linux kernel on Android needs to know about it. It's only getting
in the way and causing problems for reasons we don't fully understand.
But we don't even need to understand it because it's not relevant
anymore.
Instead, provide a dummy net.Listener that just sits and blocks to
pacify the rest of the code that assumes it can be stuck in a
Listener.Accept call and call Listener.Close and Listener.Addr.
We'll likely do this for all platforms in the future, if/when we also
link in netstack on iOS.
Updates #4449
Updates #4293
Updates #3986
Change-Id: Ic2d3fe2f3cee60fc527356a3368830f17aeb75ae
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Two changes in one:
* make DoH upgrades an explicitly scheduled send earlier, when we come
up with the resolvers-and-delay send plan. Previously we were
getting e.g. four Google DNS IPs and then spreading them out in
time (for back when we only did UDP) but then later we added DoH
upgrading at the UDP packet layer, which resulted in sometimes
multiple DoH queries to the same provider running (each doing happy
eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs.
Instead, take those 4 Google/Cloudflare IPs and schedule 5 things:
first the DoH query (which can use all 4 IPs), and then each of the
4 IPs as UDP later.
* clean up the dnstype.Resolver.Addr confusion; half the code was
using it as an IP string (as documented) as half was using it as
an IP:port (from some prior type we used), primarily for tests.
Instead, document it was being primarily an IP string but also
accepting an IP:port for tests, then add an accessor method on it
to get the IPPort and use that consistently everywhere.
Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The default is still users can debug their own nodes. But like
cd916b728b did, this adds support for admins to grant additional
capabilities with the new tailcfg.CapabilityDebugPeer cap.
Updates #4217
Change-Id: Ifce3d9a1f8e8845797970a4f97b393194663d35f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fail on unsupported platforms (must be Linux or macOS tailscaled with
WIP env) or when disabled by admin (with TS_DISABLE_SSH_SERVER=1)
Updates #3802
Change-Id: I5ba191ed0d8ba4ddabe9b8fc1c6a0ead8754b286
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And rename to updateFilterLocked to prevent future mistakes.
Fixes#4427
Change-Id: I4d37b90027d5ff872a339ce8180f5723704848dc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Controlled by server-sent capability policy.
To be initially used for SSH servers to record sessions to other
nodes. Not yet productized into something user-accessible. (Notably,
the list of Taildrop targets from the sender side isn't augmented
yet.) This purely permits expanding the set of expands a node will
accept a drop from.
Updates #3802
Updates #4217
Change-Id: Id7a5bccd686490f8ef2cdc7dae7c07c440dc0085
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailcfg.PingResponse formalizes the TSMP & disco response message, and
controlclient is wired to send POST responses containing
tailcfg.PingResponse for TSMP and disco PingRequests.
Updates tailscale/corp#754
Signed-off-by: James Tucker <james@tailscale.com>
Remove the weird netstack -> tailssh dependency and instead have tailssh
register itself with ipnlocal when linked.
This makes tailssh.server a singleton, so we can have a global map of
all sessions.
Updates #3802
Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently peerIPs doesn't do any sorting of the routes it returns. This
is typically fine, however imagine the case of an HA subnet router
failover. When a route R moves from peer A to peer B, the output of
peerIPs changes. This in turn causes all the deephash check inside
wgengine to fail as the hashed value of [R1, R2] is different than
the hashed value of [R2, R1]. When the hash check failes, it causes
wgengine to reconfigure all routes in the OS. This is especially
problematic for macOS and iOS where we use the NetworkExtension.
This commit makes it that the peerIPs are always sorted when returned,
thus making the hash be consistent as long as the list of routes remains
static.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)
e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:
tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112
(112 being /128 minuse the /96 v6 prefix length)
Then people in my tailnet can:
$ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....
Updates #3616, etc
RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes
Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Combine the code between `LocalBackend.CheckIPForwarding` and
`controlclient.ipForwardingBroken`.
Fixes#4300
Signed-off-by: Maisem Ali <maisem@tailscale.com>
While we rearrange/upstream things.
gliderlabs/ssh is forked into tempfork from our prior fork
at be8b7add40
x/crypto/ssh OTOH is forked at
https://github.com/tailscale/golang-x-crypto because it was gnarlier
to vendor with various internal packages, etc.
Its git history shows where it starts (2c7772ba30643b7a2026cbea938420dce7c6384d).
Updates #3802
Change-Id: I546e5cdf831cfc030a6c42557c0ad2c58766c65f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When `setWgengineStatus` is invoked concurrently from multiple
goroutines, it is possible that the call invoked with a newer status is
processed before a call with an older status. e.g. a status that has
endpoints might be followed by a status without endpoints. This causes
unnecessary work in the engine and can result in packet loss.
This patch adds an `AsOf time.Time` field to the status to specifiy when the
status was calculated, which later allows `setWgengineStatus` to ignore
any status messages it receives that are older than the one it has
already processed.
Updates tailscale/corp#2579
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a "tailscale nc" command that acts a bit like "nc", but
dials out via tailscaled via localapi.
This is a step towards a "tailscale ssh", as we'll use "tailscale nc"
as a ProxyCommand for in some cases (notably in userspace mode).
But this is also just useful for debugging & scripting.
Updates #3802
RELNOTE=tailscale nc
Change-Id: Ia5c37af2d51dd0259d5833d80264d3ad5f68446a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also make IPPrefixSliceOf use Slice[netaddr.IPPrefix] as it also
provides additional functions besides the standard ones provided by
Slice[T].
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We need to be able to provide the ability for the GUI clients to resolve and set
the exit node IP from an untrusted string, thus enabling the ability to specify
that information via enterprise policy.
This patch moves the relevant code out of the handler for `tailscale up`,
into a method on `Prefs` that may then be called by GUI clients.
We also update tests accordingly.
Updates https://github.com/tailscale/corp/issues/4239
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
And add a CapabilityVersion type, primarily for documentation.
This makes MapRequest.Version, RegisterRequest.Version, and
SetDNSRequest.Version all use the same version, which will avoid
confusing in the future if Register or SetDNS ever changed their
semantics on Version change. (Currently they're both always 1)
This will requre a control server change to allow a
SetDNSRequest.Version value other than 1 to be deployed first.
Change-Id: I073042a216e0d745f52ee2dbc45cf336b9f84b7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise it would log warnings about an empty file.
```
stores.go:138: store.NewFileStore("/tmp/3777352782"): file empty; treating it like a missing file [warning]
```
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Also move KubeStore and MemStore into their own package.
RELNOTE: tsnet now supports providing a custom ipn.StateStore.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
For local dev testing initially. Product-wise, it'll probably only be
workable on the two unsandboxed builds.
Updates #3802
Change-Id: Ic352f966e7fb29aff897217d79b383131bf3f92b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I introduced a bug in 8fe503057d when unifying oneConnListener
implementations.
The NewOneConnListenerFrom API was easy to misuse (its Close method
closes the underlying Listener), and we did (via http.Serve, which
closes the listener after use, which meant we were close the peerapi's
listener, even though we only wanted its Addr)
Instead, combine those two constructors into one and pass in the Addr
explicitly, without delegating through to any Listener.
Change-Id: I061d7e5f842e0cada416e7b2dd62100d4f987125
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't make users map their system's "caddy" (or whatever) system user
to its userid. We can do that. Support either a uid or a username.
RELNOTE=TS_PERMIT_CERT_UID can contain a uid or username
Change-Id: I7451b537a5e118b818addf1353882291d5f0d07f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
e.g. the change to ipnlocal in this commit ultimately logs out:
{"logtail":{"client_time":"2022-02-17T20:40:30.511381153-08:00","server_time":"2022-02-18T04:40:31.057771504Z"},"type":"Hostinfo","val":{"GoArch":"amd64","Hostname":"tsdev","IPNVersion":"1.21.0-date.20220107","OS":"linux","OSVersion":"Debian 11.2 (bullseye); kernel=5.10.0-10-amd64"},"v":1}
Change-Id: I668646b19aeae4a2fed05170d7b279456829c844
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(The name SSH_HostKeys is bad but SSHHostKeys is worse.)
Updates #3802
Change-Id: I2a889019c9e8b065b668dd58140db4fcab868a91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make tailssh ask LocalBackend for the SSH hostkeys, as we'll need to
distribute them to peers.
For now only the hacky use-same-as-actual-host mode is implemented.
Updates #3802
Change-Id: I819dcb25c14e42e6692c441186c1dc744441592b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Maisem Ali
James Tucker
Ilya Mateyko
Maisem Ali
Josh Bleecher Snyder
Aaron Klotz
Nick O'Neill