In case we want to change the format to something opaque later.
Updates tailscale/corp#2549
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie2eac8b885b694be607e9d5101d24b650026d89c
This eliminates unnecessary map.Clone() calls and also eliminates
repetitive notifications about the same set of shares.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Updates tailscale/corp#17859
Provides a local API endpoint to be called from the GUI to inform the backend when the client menu is opened or closed.
cc @bradfitz
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This is a temporary solution to at least omit Mullvad exit nodes
from the list of TailFS peers. Once we can identify peers that are
actually sharing via TailFS, we can remove this, but for alpha it'll
be sufficient to just omit Mullvad.
Updates tailscale/corp#17766
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Moving logic that manipulates a ServeConfig into recievers on the
ServeConfig in the ipn package. This is setup work to allow the
web client and cli to both utilize these shared functions to edit
the serve config.
Any logic specific to flag parsing or validation is left untouched
in the cli command. The web client will similarly manage its
validation of user's requested changes. If validation logic becomes
similar-enough, we can make a serve util for shared functionality,
which likely does not make sense in ipn.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Since link-local addresses are definitionally more likely to be a direct
(lower-latency, more reliable) connection than a non-link-local private
address, give those a bit of a boost when selecting endpoints.
Updates #8097
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I93fdeb07de55ba39ba5fcee0834b579ca05c2a4e
In preparation for changes to allow configuration of serve/funnel
from the web client, this commit moves some functionality that will
be shared between the CLI and web client to the ipn package's
serve.go file, where some other util funcs are already defined.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Update docs for static Tailscale deployments on kube
to always use firewall mode autodection when in non-userspace.
Also add a note about running multiple replicas and a few suggestions how folks could do that.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>
When serving TailFS shares, tailscaled executes another tailscaled to act as a
file server. It attempts to execute this child process as an unprivileged user
using sudo -u. This is important to avoid accessing files as root, which would
result in potential privilege escalation.
Previously, tailscaled assumed that it was running as someone who can sudo -u,
and would fail if it was unable to sudo -u.
With this commit, if tailscaled is unable to sudo -u as the requested user, and
tailscaled is not running as root, then tailscaled executes the the file server
process under the same identity that ran tailscaled, since this is already an
unprivileged identity.
In the unlikely event that tailscaled is running as root but is unable to
sudo -u, it will refuse to run the child file server process in order to avoid
privilege escalation.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
The package info output can list multiple package versions, and not in
descending order. Find the newest version in the output, instead of the
first one.
Fixes#11309
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Ensure that the latest DNATNonTailscaleTraffic rule
gets inserted on top of any pre-existing rules.
Updates tailscale/tailscale#11281
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This allows the Mac application to regain access to restricted
folders after restarts.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This allows the sandboxed Mac application to store security-
scoped URL bookmarks in order to maintain access to restricted
folders across restarts.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This was just added in 69f4b459 which doesn't yet use it. This still
doesn't yet use it. It just pushes it down deeper into magicsock where
it'll used later.
Updates #7617
Change-Id: If2f8fd380af150ffc763489e1ff4f8ca2899fac6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used a HandleSet before when we didn't have a unique handle. But a
sessionID is a unique handle, so use that instead. Then that replaces
the other map we had.
And now we'll have a way to look up an IPN session by sessionID for
later.
Updates tailscale/corp#17859
Change-Id: I5f647f367563ec8783c643e49f93817b341d9064
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes a regression introduced with 993acf4 and released in
v1.60.0.
The regression caused us to intercept all userspace traffic to port
8080 which prevented users from exposing their own services to their
tailnet at port 8080.
Now, we only intercept traffic to port 8080 if it's bound for
100.100.100.100 or fd7a:115c:a1e0::53.
Fixes#11283
Signed-off-by: Percy Wegmann <percy@tailscale.com>
(cherry picked from commit 17cd0626f35dbc7948a78665d06a5862fc3dfdab)
Starting in Vite 5, Vite now issues a deprecation warning when using
a CJS-based Vite config file. This commit fixes it by adding the
`"type": "module"` to our package.json to opt our files into ESM module
behaviours.
Fixes #cleanup
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
This adds a method to wgengine.Engine and plumbed down into magicsock
to add a way to get a type-safe Tailscale-safe wrapper around a
wireguard-go device.Peer that only exposes methods that are safe for
Tailscale to use internally.
It also removes HandshakeAttempts from PeerStatusLite that was just
added as it wasn't needed yet and is now accessible ala cart as needed
from the Peer type accessor.
None of this is used yet.
Updates #7617
Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This server recently had a common ansible applied, which added a
periodic /tmp cleaner, as is needed on other CI machines to deal with
test tempfile leakage. The setting of $HOME to /tmp means that the go
toolchain in there was regularly getting pruned by the tmp cleaner, but
often incompletely, because it was also in use.
Move HOME to a runner owned directory.
Updates #11248
Signed-off-by: James Tucker <james@tailscale.com>
... rather than 1970. Code was using IsZero against the 1970 team
(which isn't a zero value), but fortunately not anywhere that seems to
have mattered.
Updates #cleanup
Change-Id: I708a3f2a9398aaaedc9503678b4a8a311e0e019e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update typescript to 5.3.3. This is a major bump from the previous
version of 4.8.3. This also requires adding newer versions of
@typescript-eslint/eslint-plugin and @typescript-eslint/parser to our
resolutions as eslint-config-react-app pulls in versions that otherwise
do not support typescript 5.x.
eslint-config-react-app has not been updated in 2 years and is seemingly
abandoned, so we may wish to fork it or move to a different eslint config
in the future.
Updates https://github.com/tailscale/corp/issues/17810
Signed-off-by: Mario Minardi <mario@tailscale.com>
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator.
Updates tailscale/tailscale#11251
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>
Containerboot container created for operator's ingress and egress proxies
are now always configured by passing a configfile to tailscaled
(tailscaled --config <configfile-path>.
It does not run 'tailscale set' or 'tailscale up'.
Upgrading existing setups to this version as well as
downgrading existing setups at this version works.
Updates tailscale/tailscale#10869
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add logic to autogenerate CRD docs.
.github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs.
Docs can be refreshed by running make kube-generate-all.
Updates tailscale/tailscale#11023
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
On Alpine, we add the tailscale service but fail to call start.
This means that tailscale does not start up until the user reboots the machine.
Fixes#11161
Signed-off-by: Keli Velazquez <keli@tailscale.com>
Not yet used. This is being made available so magicsock/wgengine can
use it to ignore certain sends (UDP + DERP) later on at least mobile,
letting wireguard-go think it's doing its full attempt schedule, but
we can cut it short conditionally based on what we know from the
control plane.
Updates #7617
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia367cf6bd87b2aeedd3c6f4989528acdb6773ca7
Otherwise on OS retransmits, we'd make redundant timers in Go's timer
heap that upon firing just do nothing (well, grab a mutex and check a
map and see that there's nothing to do).
Updates #cleanup
Change-Id: Id30b8b2d629cf9c7f8133a3f7eca5dc79e81facb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No need to hold wgLock while using the device to LookupPeer;
that has its own mutex already.
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib56049fcc7163cf5a2c2e7e12916f07b4f9d67cb
It's unnecessary. Returning an array value is already a copy.
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: If7f350b61003ea08f16a531b7b4e8ae483617939
When reverse path filtering is in strict mode on Linux, using an exit
node blocks all network connectivity. This change adds a warning about
this to `tailscale status` and the logs.
Example in `tailscale status`:
```
- not connected to home DERP region 22
- The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Example in the logs:
```
2024/02/21 21:17:07 health("overall"): error: multiple errors:
not in map poll
The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Andrew Dunham
Irbe Krumina
Percy Wegmann
Andrea Gottardo
Sonia Appasamy
Kristoffer Dalby
License Updater
Brad Fitzpatrick
Paul Scott
Claire Wang
Chris Palmer
Flakes Updater
Andrew Lytvynov
Ross Zurowski
James Tucker
Mario Minardi
Keli
Anton Tolchanov