It was only obviously unused after the previous change, c39cde79d.
Updates #19334
Change-Id: I9896d5fa692cb4346c070b4a339d0d12340c18f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were storing server-side lots of:
"Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""},
That was about 7% of our total storage of pending RegisterRequest
bodies.
Updates tailscale/corp#19327
Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If this happens, it results in us pessimistically closing more
connections than might be necessary, but is more correct since we won't
"miss" a change to the default route interface and keep trying to send
data over a nonexistent interface, or one that can't reach the internet.
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia0b8b04cb8cdcb0da0155fd08751c9dccba62c1a
The Network Location Awareness service identifies networks authenticated against
an Active Directory domain and categorizes them as "Domain Authenticated".
This includes the Tailscale network if a Domain Controller is reachable through it.
If a network is categories as NLM_NETWORK_CATEGORY_DOMAIN_AUTHENTICATED,
it is not possible to override its category, and we shouldn't attempt to do so.
Additionally, our Windows Firewall rules should be compatible with both private
and domain networks.
This fixes both issues.
Fixes#11813
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Containers are typically immutable and should be updated as a whole (and
not individual packages within). Deny enablement of auto-updates in
containers.
Also, add the missing check in EditPrefs in LocalAPI, to catch cases
like tailnet default auto-updates getting enabled for nodes that don't
support it.
Updates #11544
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
We don't always have the same latest version for all platforms (like
with 1.64.2 is only Synology+Windows), so we should use the OS-specific
result from pkgs JSON response instead of the main Version field.
Updates #11795
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Kubernetes cluster domain defaults to 'cluster.local', but can also be customized.
We need to determine cluster domain to set up in-cluster forwarding to our egress proxies.
This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains.
This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf.
In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'.
Updates tailscale/tailscale#10399,tailscale/tailscale#11445
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
peerapi does not want these, but rclone includes them.
Removing them allows rclone to work with Taildrive configured
as a WebDAV remote.
Updates #cleanup
Signed-off-by: Percy Wegmann <percy@tailscale.com>
peerapi does not want these, but rclone includes them.
Stripping them out allows rclone to work with Taildrive configured
as a WebDAV remote.
Updates #cleanup
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This ensures that MOVE, LOCK and any other verbs that use the Location
header work correctly.
Fixes#11758
Signed-off-by: Percy Wegmann <percy@tailscale.com>
-Move Android impl into interfaces_android.go
-Instead of using ip route to get the interface name, use the one passed in by Android (ip route is restricted in Android 13+ per termux/termux-app#2993)
Follow-up will be to do the same for router
Fixestailscale/corp#19215Fixestailscale/corp#19124
Signed-off-by: kari-ts <kari@tailscale.com>
Some editions of Windows server share the same build number as their
client counterpart; we must use an additional field found in the OS
version information to distinguish between them.
Even though "Distro" has Linux connotations, it is the most appropriate
hostinfo field. What is Windows Server if not an alternate distribution
of Windows? This PR populates Distro with "Server" when applicable.
Fixes#11785
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This change is safe (self is still safe, by
definition), and makes the code match the comment.
Updates #cleanup
Signed-off-by: Chris Palmer <cpalmer@tailscale.com>
Most of the magicsock tests fake the network, simulating packets going
out and coming in. There's no reason to actually hit your router to do
UPnP/NAT-PMP/PCP during in tests. But while debugging thousands of
iterations of tests to deflake some things, I saw it slamming my
router. This stops that.
Updates #11762
Change-Id: I59b9f48f8f5aff1fa16b4935753d786342e87744
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Turns out, profileManager is not safe for concurrent use and I missed
all the locking infrastructure in LocalBackend, oops.
I was not able to reproduce the race even with `go test -count 100`, but
this seems like an obvious fix.
Fixes#11773
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This ensures that we close the underlying connection(s) when a major
link change happens. If we don't do this, on mobile platforms switching
between WiFi and cellular can result in leftover connections in the
http.Client's connection pool which are bound to the "wrong" interface.
Updates #10821
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibd51ce2efcaf4bd68e14f6fdeded61d4e99f9a01
The approach is lifted from cobra: `tailscale completion bash` emits a bash
script for configuring the shell's autocomplete:
. <( tailscale completion bash )
so that typing:
tailscale st<TAB>
invokes:
tailscale completion __complete -- st
RELNOTE=tailscale CLI now supports shell tab-completion
Fixes#3793
Signed-off-by: Paul Scott <paul@tailscale.com>
This removes AWS and Kubernetes support from Linux binaries by default
on GOARCH values where people don't typically run on AWS or use
Kubernetes, such as 32-bit mips CPUs.
It primarily focuses on optimizing for the static binaries we
distribute. But for people building it themselves, they can set
ts_kube or ts_aws (the opposite of ts_omit_kube or ts_omit_aws) to
force it back on.
Makes tailscaled binary ~2.3MB (~7%) smaller.
Updates #7272, #10627 etc
Change-Id: I42a8775119ce006fa321462cb2d28bc985d1c146
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This wasn't previously handling the case where an interface in s2 was
removed and not present in s1, and would cause the Equal method to
incorrectly return that the states were equal.
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I3af22bc631015d1ddd0a1d01bfdf312161b9532d
It should've been deleted in 11ece02f52.
Updates #9040
Change-Id: If8a136bdb6c82804af658c9d2b0a8c63ce02d509
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates tailscale/corp#18724
When localAPI clients directly set ExitNodeID to "", the expected behaviour is that the prior exit node also gets zero'd - effectively setting the UI state back to 'no exit node was ever selected'
The IntenalExitNodePrior has been changed to be a non-opaque type, as it is read by the UI to render the users last selected exit node, and must be concrete. Future-us can either break this, or deprecate it and replace it with something more interesting.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We haven't needed this hack for quite some time Andrea says.
Updates #11649
Change-Id: Ie854b7edd0a01e92495669daa466c7c0d57e7438
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm on a mission to simplify LocalBackend.Start and its locking
and deflake some tests.
I noticed this hasn't been used since March 2023 when it was removed
from the Windows client in corp 66be796d33c.
So, delete.
Updates #11649
Change-Id: I40f2cb75fb3f43baf23558007655f65a8ec5e1b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have seen in macOS client logs that the "operation not permitted", a
syscall.EPERM error, is being returned when traffic is attempted to be
sent. This may be caused by security software on the client.
This change will perform a rebind and restun if we receive a
syscall.EPERM error on clients running darwin. Rebinds will only be
called if we haven't performed one specifically for an EPERM error in
the past 5 seconds.
Updates #11710
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The gliderlabs/ssh license is actually already included in the standard
package listing. I'm not sure why I thought it wasn't.
Updates tailscale/corp#5780
This reverts commit 11dca08e93.
Signed-off-by: Will Norris <will@tailscale.com>
Trying to run iptables/nftables on Synology pauses for minutes with
lots of errors and ultimately does nothing as it's not used and we
lack permissions.
This fixes a regression from db760d0bac (#11601) that landed
between Synology testing on unstable 1.63.110 and 1.64.0 being cut.
Fixes#11737
Change-Id: Iaf9563363b8e45319a9b6fe94c8d5ffaecc9ccef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It was broken with the move to dist in 32e0ba5e68 which doesn't accept
amd64 anymore.
Updates #cleanup
Change-Id: Iaaaba2d73c6a09a226934fe8e5c18b16731ee7a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Andrew Dunham
Nick Khyl
Andrew Lytvynov
Irbe Krumina
Percy Wegmann
Claire Wang
kari-ts
Aaron Klotz
Chris Palmer
Adrian Dewhurst
dependabot[bot]
Paul Scott
Jonathan Nobels
Charlotte Brandhorst-Satzkorn
Will Norris