The tailscale package is in the community Alpine repo. Check if it's
commented out in `/etc/apk/repositories` and run `setup-apkrepos -c -1`
if it's not.
Fixes#11263
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add node attribute to determine whether or not to show suggested exit
node in UI.
Updates tailscale/corp#19515
Signed-off-by: Claire Wang <claire@tailscale.com>
This fixes bugs where after using the cli to set AdvertiseRoutes users
were finding that they had to restart tailscaled before the app
connector would advertise previously learned routes again. And seems
more in line with user expectations.
Fixes#11006
Signed-off-by: Fran Bull <fran@tailscale.com>
If the controlknob to persist app connector routes is enabled, when
reconfiguring an app connector unadvertise routes that are no longer
relevant.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
If the controlknob is on.
This will allow us to remove discovered routes associated with a
particular domain.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
When an app connector is reconfigured and domains to route are removed,
we would like to no longer advertise routes that were discovered for
those domains. In order to do this we plan to store which routes were
discovered for which domains.
Add a controlknob so that we can enable/disable the new behavior.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
Lays the groundwork for the ability to persist app connectors discovered
routes, which will allow us to stop advertising routes for a domain if
the app connector no longer monitors that domain.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
Explicitly set `-H "Content-Type: application/json"` in CURL examples
for POST endpoints as the default content type used by CURL is otherwise
`application/x-www-form-urlencoded` and these endpoints expect JSON data.
Updates https://github.com/tailscale/tailscale/issues/11914
Signed-off-by: Mario Minardi <mario@tailscale.com>
cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms
* Allow users to pre-create empty state Secrets
* Add a fake internal kube client, test functionality that has dependencies on kube client operations.
* Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist
* Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed
Updates tailscale/tailscale#11170
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Modifies containerboot to wait on tailscaled process
only, not on any child process of containerboot.
Waiting on any subprocess was racing with Go's
exec.Cmd.Run, used to run iptables commands and
that starts its own subprocesses and waits on them.
Containerboot itself does not run anything else
except for tailscaled, so there shouldn't be a need
to wait on anything else.
Updates tailscale/tailscale#11593
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm working on moving all network state queries to be on
netmon.Monitor, removing old APIs.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: If0de137e0e2e145520f69e258597fb89cf39a2a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#19558
A request for the suggested exit nodes that occurs too early in the
VPN lifecycle would result in a null deref of the netmap and/or
the netcheck report. This checks both and errors out.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for tsd.System Tracker plumbing throughout tailscaled,
defensively permit all methods on Tracker to accept a nil receiver
without crashing, lest I screw something up later. (A health tracking
system that itself causes crashes would be no good.) Methods on nil
receivers should not be called, so a future change will also collect
their stacks (and panic during dev/test), but we should at least not
crash in prod.
This also locks that in with a test using reflect to automatically
call all methods on a nil receiver and check they don't crash.
Updates #11874
Updates #4136
Change-Id: I8e955046ebf370ec8af0c1fb63e5123e6282a9d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously it was both metadata about the class of warnable item as
well as the value.
Now it's only metadata and the value is per-Tracker.
Updates #11874
Updates #4136
Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This improves convenience and security.
* Convenience - no need to see nodes that can't share anything with you.
* Security - malicious nodes can't expose shares to peers that aren't
allowed to access their shares.
Updates tailscale/corp#19432
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Allows all users to read all files, and .sh/.cgi files to be
executable.
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
If seamless key renewal is enabled, we typically do not stop the engine
(deconfigure networking). However, if the node key has expired there is
no point in keeping the connection up, and it might actually prevent
key renewal if auth relies on endpoints routed via app connectors.
Fixestailscale/corp#5800
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Fixestailscale/corp#19459
This PR adds the ability for users of the syspolicy handler to read string arrays from the MDM solution configured on the system.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This change allows for the release/dist/qnap package to be used
outside of the tailscale repo (notably, will be used from corp),
by using an embedded file system for build files which gets
temporarily written to a new folder during qnap build runs.
Without this change, when used from corp, the release/dist/qnap
folder will fail to be found within the corp repo, causing
various steps of the build to fail.
The file renames in this change are to combine the build files
into a /files folder, separated into /scripts and /Tailscale.
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This helps reduce memory pressure on tailnets with large numbers
of routes.
Updates tailscale/corp#19332
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This PR bumps iptables to a newer version that has a function to detect
'NotExists' errors and uses that function to determine whether errors
received on iptables rule and chain clean up are because the rule/chain
does not exist- if so don't log the error.
Updates corp#19336
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Since the tailscaled binaries that we distribute are static and don't
link cgo, we previously wouldn't fetch group IDs that are returned via
NSS. Try shelling out to the 'id' command, similar to how we call
'getent', to detect such cases.
Updates #11682
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I9bdc938bd76c71bc130d44a97cc2233064d64799
There is an undocumented 16KiB limit for text log messages.
However, the limit for JSON messages is 256KiB.
Even worse, logging JSON as text results in significant overhead
since each double quote needs to be escaped.
Instead, use logger.Logf.JSON to explicitly log the info as JSON.
We also modify osdiag to return the information as structured data
rather than implicitly have the package log on our behalf.
This gives more control to the caller on how to log.
Updates #7802
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Prior to
1613b18f82 (diff-314ba0d799f70c8998940903efb541e511f352b39a9eeeae8d475c921d66c2ac),
nodes could set AutoUpdate.Apply=true on unsupported platforms via
`EditPrefs`. Specifically, this affects tailnets where default
auto-updates are on.
Fix up those invalid prefs on profile reload, as a migration.
Updates #11544
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Creates new QNAP builder target, which builds go binaries then uses
docker to build into QNAP packages. Much of the docker/script code
here is pulled over from https://github.com/tailscale/tailscale-qpkg,
with adaptation into our builder structures.
The qnap/Tailscale folder contains static resources needed to build
Tailscale qpkg packages, and is an exact copy of the existing folder
in the tailscale-qpkg repo.
Builds can be run with:
```
sudo ./tool/go run ./cmd/dist build qnap
```
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Since we already track active SSH connections, it's not hard to
proactively reject updates until those finish. We attempt to do the same
on the control side, but the detection latency for new connections is in
the minutes, which is not fast enough for common short sessions.
Handle a `force=true` query parameter to override this behavior, so that
control can still trigger an update on a server where some long-running
abandoned SSH session is open.
Updates https://github.com/tailscale/corp/issues/18556
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Andrew Lytvynov
Claire Wang
Fran Bull
Andrew Dunham
Mario Minardi
Irbe Krumina
Kristoffer Dalby
Brad Fitzpatrick
Jonathan Nobels
Chris Palmer
Sonia Appasamy
Percy Wegmann
Lee Briggs
Anton Tolchanov
Andrea Gottardo
License Updater
Joe Tsai