I should've bumped capver in 65fe0ba7b5 but forgot.
This lets us turn off the cryptokey routing change from control for
the affected panicky range of commits, based on capver.
Updates #13332
Updates tailscale/corp#20732
Change-Id: I32c17cfcb45b2369b2b560032330551d47a0ce0b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Both for Raspberry Pis, and for running natlab tests faster on Apple
Silicon Macs without emulating x86.
Not fully wired up yet.
Updates #1866
Updates #13038
Change-Id: I1552bf107069308f325f640773cc881ed735b5ab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No need to make callers specify the redundant IP version or
TTL/HopLimit or EthernetType in the common case. The mkPacket helper
can set those when unset.
And use the mkIPLayer in another place, simplifying some code.
And rename mkPacketErr to just mkPacket, then move mkPacket to
test-only code, as mustPacket.
Updates #13038
Change-Id: Ic216e44dda760c69ab9bfc509370040874a47d30
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And clean up some of the test helpers in the process.
Updates #13038
Change-Id: I3e2b5f7028a32d97af7f91941e59399a8e222b25
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'd added this helper for tests, but then moved it to non-test code
and forgot some places to use it. This uses it in more places to
remove some boilerplate.
Updates #13038
Change-Id: Ic4dc339be1c47a55b71d806bab421097ee3d75ed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds tests for DNS requests, and ignoring IPv6 packets on v4-only
networks.
No behavior changes. But some things are pulled out into functions.
And the mkPacket helpers previously just for tests are moved into
non-test code to be used elsewhere to reduce duplication, doing the
checksum stuff automatically.
Updates #13038
Change-Id: I4dd0b73c75b2b9567b4be3f05a2792999d83f6a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds support for sending packets to 33:33:00:00:01 at IPv6
multicast address ff02::1 to send to all nodes.
Nothing in Tailscale depends on this (yet?), but it makes debugging in
VMs behind natlab easier (e.g. you can ping all nodes), and other
things might depend on this in the future.
Mostly I'm trying to flesh out the IPv6 support in natlab now that we
can write vnet tests.
Updates #13038
Change-Id: If590031fcf075690ca35c7b230a38c3e72e621eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To test how virtual machines connect to the natlab vnet code.
Updates #13038
Change-Id: Ia4fd4b0c1803580ee7d94cc9878d777ad4f24f82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And refactor some of vnet.go for testability.
The only behavioral change (with a new test) is that ethernet
broadcasts no longer get sent back to the sender.
Updates #13038
Change-Id: Ic2e7e7d6d8805b7b7f2b5c52c2c5ba97101cef14
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The bad naming (which had only been half updated with the IPv6
changes) tripped me up in the earlier change.
Updates #13038
Change-Id: I65ce07c167e8219d35b87e1f4bf61aab4cac31ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The reason they weren't working was because the cmd/tta agent in the
guest was dialing out to the test and the vnet couldn't map its global
unicast IPv6 address to a node as it was just using a
map[netip.Addr]*node and blindly trusting the *node was
populated. Instead, it was nil, so the agent connection fetching
didn't work for its RoundTripper and the test could never drive the
node. That map worked for IPv4 but for IPv6 we need to use the method
that takes into account the node's IPv6 SLAAC address. Most call sites
had been converted but I'd missed that one.
Also clean up some debug, and prohibit nodes' link-local unicast
addresses from dialing 2000::/3 directly for now. We can allow that to
be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's
called.) That mode was working on accident, but was confusing: Linux
would do source address selection from link local for the first few
seconds and then after SLAAC and DAD, switch to using the global
unicast source address. Be consistent for now and force it to use the
global unicast.
Updates #13038
Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Really we need to fix logpolicy + bootstrapDNS to not be so aggressive,
but this is a quick workaround meanwhile.
Without this, tailscaled starts immediately while IPv6 DAD is
happening for a couple seconds and logpolicy freaks out without the
network available and starts spamming stderr about bootstrap DNS
options. But we see that regularly anyway from people whose wifi is
down. So we need to fix the general case. This is not that fix.
Updates #13038
Change-Id: Iba7e536d08e59d34abded1d279f88fdc9c46d94d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There were a few places it could get wedged (notably the dial without
a timeout).
And add a knob for verbose debug logs.
And keep two idle connections always.
Updates #13038
Change-Id: I952ad182d7111481d97a83c12aa2ff4bfdc55fe8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move all the UDP handling to its own func to remove a bunch of "if
isUDP" checks in a bunch of blocks.
Updates #13038
Change-Id: If71d71b49e57651d15bd307a2233c43751cc8639
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't actually see this, but added this while debugging something
and figured it'd be good to keep.
Updates #13038
Change-Id: I67934c8a329e0233f79c3b08516fd6bad6bfe22a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And sprinkle some more docs around.
Updates #13038
Change-Id: Ia2dcf567b68170481cc2094d64b085c6b94a778a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All the magic service names with virtual IPs will need IPv6 variants.
Pull this out in prep.
Updates #13038
Change-Id: I53b5eebd0679f9fa43dc0674805049258c83a0de
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we don't log about them when verbose logging is enabled.
Updates #13038
Change-Id: I925bc3a23e6c93d60dd4fb4bf6a4fdc5a326de95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The natlab Test Agent (tta) still had its old log streaming hack in
place where it dialed out to anything on TCP port 124 and those logs
were streamed to the host running the tests. But we'd since added gokrazy
syslog streaming support, which made that redundant.
So remove all the port 124 stuff. And then make sure we log to stderr
so gokrazy logs it to syslog.
Also, keep the first 1MB of logs in memory in tta too, exported via
localhost:8034/logs for interactive debugging. That was very useful
during debugging when I added IPv6 support. (which is coming in future
PRs)
Updates #13038
Change-Id: Ieed904a704410b9031d5fd5f014a73412348fa7f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise you get "Access denied: watch IPN bus access denied, must
set ipn.NotifyNoPrivateKeys when not running as admin/root or
operator".
This lets a non-operator at least start the app and see the status, even
if they can't change everything. (the web UI is unaffected by operator)
A future change can add a LocalAPI call to check permissions and guide
people through adding a user as an operator (perhaps the web client
can do that?)
Updates #1708
Change-Id: I699e035a251b4ebe14385102d5e7a2993424c4b7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And convert a few callers as an example, but nowhere near all.
Updates #12912
Change-Id: I5eaa12a29a6cd03b58d6f1072bd27bc0467852f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid dig vs nslookup vs $X availability issues between
OSes/distros. And to be in Go, to match the resolver we use.
Updates #13038
Change-Id: Ib7e5c351ed36b5470a42cbc230b8f27eed9a1bf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... rather than abusing the generic tsapp.
Per discussion in https://github.com/gokrazy/gokrazy/pull/275
It also means we can remove stuff we don't need, like ntp or randomd.
Updates #13038
Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's too new to be supported in Debian bookworm so just remove it.
It doesn't seem to matter or help speed anything up.
Updates #13038
Change-Id: I39077ba8032bebecd75209552b88f1842c843c33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
84adfa1ba3 made MAC addresses 1-based too, but didn't adjust this IP address
calculation which was based on the MAC address
Updates #13038
Change-Id: Idc112b303b0b85f41fe51fd61ce1c0d8a3f0f57e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The heartbeat package does nothing if not configured anyway, so don't
even put it in the image and pay the cost of it running.
Updates #13038
Updates #1866
Change-Id: Id22c0fb1f8395ad21ab0e0350973d31730e8d39f
The change in b7e48058c8 was too loose; it also captured the CLI
being run as a child process under cmd/tta.
Updates #13038
Updates #1866
Change-Id: Id410b87132938dd38ed4dd3959473c5d0d242ff5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
These three packages aren't in gokrazy/tsapp/config.json but
used to be. Unfortunately, that meant that were being included
in the resulting image. Apparently `gok` doesn't delete them or
warn about them being present on disk when they're moved from
the config file.
Updates #13038
Updates #1866
Change-Id: I54918a9e3286ea755b11dde5e9efdd433b8f8fb8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had a mix of 0-based and 1-based nodes and MACs in logs.
Updates #13038
Change-Id: I36d1b00f7f94b37b4ae2cd439bcdc5dbee6eda4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using https://github.com/gokrazy/gokrazy/pull/275
This is much lower latency than logcatcher, which is higher latency
and chunkier. And this is better than getting it via 'tailscale debug
daemon-logs', which misses early interesting logs.
Updates #13038
Change-Id: I499ec254c003a9494c0e9910f9c650c8ac44ef33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Similar to UseSocketOnly, but pulled out separately in case
people are doing unknown weird things.
Updates #13038
Change-Id: I7478e5cb9794439b947440b831caa798941845ea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To test local connections.
Updates #13038
Change-Id: I575dcab31ca812edf7d04fa126772611cf89b9a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And don't make guests under vnet/natlab upload to logcatcher,
as there won't be a valid cert anyway.
Updates #13038
Change-Id: Ie1ce0139788036b8ecc1804549a9b5d326c5fef5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It seems some security software or macOS itself might be MITMing TLS
(for ScreenTime?), so don't warn unless it fails x509 validation
against system roots.
Updates #3198
Change-Id: I6ea381b5bb6385b3d51da4a1468c0d803236b7bf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All wasi* are GOARCH wasm, so check that instead.
Updates #12732
Change-Id: Id3cc346295c1641bcf80a6c5eb1ad65488509656
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... and then do approximately nothing with that information, other
than a big TODO. This is mostly me relearning this code and leaving
breadcrumbs for others in the future.
Updates #12724
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
If we get an non-disco presumably-wireguard-encrypted UDP packet from
an IP:port we don't recognize, rather than drop the packet, give it to
WireGuard anyway and let WireGuard try to figure out who it's from and
tell us.
This uses the new hook added in https://github.com/tailscale/wireguard-go/pull/27
Updates tailscale/corp#20732
Change-Id: I5c61a40143810592f9efac6c12808a87f924ecf2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For testing. Lee wants to play with 'AWS Global Accelerator Custom
Routing with Amazon Elastic Kubernetes Service'. If this works well
enough, we can promote it.
Updates #12578
Change-Id: I5018347ed46c15c9709910717d27305d0aedf8f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The DERP Return Path Optimization (DRPO) is over four years old (and
on by default for over two) and we haven't had problems, so time to
remove the emergency shutoff code (controlknob) which we've never
used. The controlknobs are only meant for new features, to mitigate
risk. But we don't want to keep them forever, as they kinda pollute
the code.
Updates #150
Change-Id: If021bc8fd1b51006d8bddd1ffab639bb1abb0ad1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And fix up a bogus comment and flesh out some other comments.
Updates #cleanup
Change-Id: Ia60a1c04b0f5e44e8d9587914af819df8e8f442a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix regression from #8108 (Mar 2023). Since that change, gocross has
always been rebuilt on each run of ./tool/go (gocross-wrapper.sh),
adding ~100ms. (Well, not totally rebuilt; cmd/go's caching still
ends up working fine.)
The problem was $gocross_path was just "gocross", which isn't in my
path (and "." isn't in my $PATH, as it shouldn't be), so this line was
always evaluating to the empty string:
gotver="$($gocross_path gocross-version 2>/dev/null || echo '')"
The ./gocross is fine because of the earlier `cd "$repo_root"`
Updates tailscale/corp#21262
Updates tailscale/corp#21263
Change-Id: I80d25446097a3bb3423490c164352f0b569add5f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In hopes it'll be found more.
Updates tailscale/corp#20844
Change-Id: Ic92ee9908f45b88f8770de285f838333f9467465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And some misc doc tweaks for idiomatic Go style.
Updates #cleanup
Change-Id: I3ca45f78aaca037f433538b847fd6a9571a2d918
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
PeerPresentFlags was added in 5ffb2668ef but wasn't plumbed through to
the RunConnectionLoop. Rather than add yet another parameter (as
IP:port was added earlier), pass in the raw PeerPresentMessage and
PeerGoneMessage struct values, which are the same things, plus two
fields: PeerGoneReasonType for gone and the PeerPresentFlags from
5ffb2668ef.
Updates tailscale/corp#17816
Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I couldn't convince myself the old way was safe and couldn't lose
writes.
And it seemed too complicated.
Updates tailscale/corp#21104
Change-Id: I17ba7c7d6fd83458a311ac671146a1f6a458a5c1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
sendMeshUpdates tries to write as much as possible without blocking,
being careful to check the bufio.Writer.Available size before writes.
Except that regressed in 6c791f7d60 which made those messages larger, which
meants we were doing network I/O with the Server mutex held.
Updates tailscale/corp#13945
Change-Id: Ic327071d2e37de262931b9b390cae32084811919
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix regression from bd93c3067e where I didn't notice the
32-bit test failure was real and not its usual slowness-related
regression. Yay failure blindness.
Updates #12526
Change-Id: I00e33bba697e2cdb61a0d76a71b62406f6c2eeb9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was hex-ifying the String() form of key.NodePublic, which was already hex.
I noticed in some logs:
"client 6e6f64656b65793a353537353..."
And thought that 6x6x6x6x looked strange. It's "nodekey:" in hex.
Updates tailscale/corp#20844
Change-Id: Ib9f2d63b37e324420b86efaa680668a9b807e465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
