Saves 139 KB.
Also Synology support, which I saw had its own large-ish proxy parsing
support on Linux, but support for proxies without Synology proxy
support is reasonable, so I pulled that out as its own thing.
Updates #12614
Change-Id: I22de285a3def7be77fdcf23e2bec7c83c9655593
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'd started to do this in the earlier ts_omit_server PR but
decided to split it into this separate PR.
Updates #17128
Change-Id: Ief8823a78d1f7bbb79e64a5cab30a7d0a5d6ff4b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When we have an old cert that is being rotated, include it in the order.
If we're in the ARI-recommended rotation window, LE should exclude us
from rate limits. If we're not within that window, the order still
succeeds, so there's no risk in including the old cert.
Fixes#15542
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* ipn/ipnlocal,envknob: add some primitives for HA replica cert share.
Add an envknob for configuring
an instance's cert store as read-only, so that it
does not attempt to issue or renew TLS credentials,
only reads them from its cert store.
This will be used by the Kubernetes Operator's HA Ingress
to enable multiple replicas serving the same HTTPS endpoint
to be able to share the same cert.
Also some minor refactor to allow adding more tests
for cert retrieval logic.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
PR #14771 added support for getting certs from alternate ACME servers, but the
certStore caching mechanism breaks unless you install the CA in system roots,
because we check the validity of the cert before allowing a cache hit, which
includes checking for a valid chain back to a trusted CA. For ease of testing,
allow cert cache hits when the chain is unknown to avoid re-issuing the cert
on every TLS request served. We will still get a cache miss when the cert has
expired, as enforced by a test, and this makes it much easier to test against
non-prod ACME servers compared to having to manage the installation of non-prod
CAs on clients.
Updates #14771
Change-Id: I74fe6593fe399bd135cc822195155e99985ec08a
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
To avoid duplicate issuances/slowness while the state Secret
contains a mismatched cert and key.
Updates tailscale/tailscale#15134
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We've been maintaining temporary dev forks of golang.org/x/crypto/{acme,ssh}
in https://github.com/tailscale/golang-x-crypto instead of using
this repo's tempfork directory as we do with other packages. The reason we were
doing that was because x/crypto/ssh depended on x/crypto/ssh/internal/poly1305
and I hadn't noticed there are forwarding wrappers already available
in x/crypto/poly1305. It also depended internal/bcrypt_pbkdf but we don't use that
so it's easy to just delete that calling code in our tempfork/ssh.
Now that our SSH changes have been upstreamed, we can soon unfork from SSH.
That leaves ACME remaining.
This change copies our tailscale/golang-x-crypto/acme code to
tempfork/acme but adds a test that our vendored copied still matches
our tailscale/golang-x-crypto repo, where we can continue to do
development work and rebases with upstream. A comment on the new test
describes the expected workflow.
While we could continue to just import & use
tailscale/golang-x-crypto/acme, it seems a bit nicer to not have that
entire-fork-of-x-crypto visible at all in our transitive deps and the
questions that invites. Showing just a fork of an ACME client is much
less scary. It does add a step to the process of hacking on the ACME
client code, but we do that approximately never anyway, and the extra
step is very incremental compared to the existing tedious steps.
Updates #8593
Updates #10238
Change-Id: I8af4378c04c1f82e63d31bf4d16dba9f510f9199
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds an envknob setting for changing the client's ACME directory URL.
This allows testing cert issuing against LE's staging environment, as
well as enabling local-only test environments, which is useful for
avoiding the production rate limits in test and development scenarios.
Fixes#14761
Change-Id: I191c840c0ca143a20e4fa54ea3b2f9b7cbfc889f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The CN field is technically deprecated; set the requested name in a DNS SAN
extension in addition to maximise compatibility with RFC 8555.
Fixes#14762
Change-Id: If5d27f1e7abc519ec86489bf034ac98b2e613043
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
We previously baked in the LetsEncrypt x509 root CA for our tlsdial
package.
This moves that out into a new "bakedroots" package and is now also
shared by ipn/ipnlocal's cert validation code (validCertPEM) that
decides whether it's time to fetch a new cert.
Otherwise, a machine without LetsEncrypt roots locally in its system
roots is unable to use tailscale cert/serve and fetch certs.
Fixes#14690
Change-Id: Ic88b3bdaabe25d56b9ff07ada56a27e3f11d7159
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
So the control plane can delete TXT records more aggressively
after client's done with ACME fetch.
Updates tailscale/corp#15848
Change-Id: I4f1140305bee11ee3eee93d4fec3aef2bd6c5a7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were eagerly doing a synchronous renewal of the cert while
trying to serve traffic. Instead of that, just do the cert
renewal in the background and continue serving traffic as long
as the cert is still valid.
This regressed in c1ecae13ab when
we introduced ARI support and were trying to make the experience
of `tailscale cert` better. However, that ended up regressing
the experience for tsnet as it would not always doing the renewal
synchronously.
Fixes#9783
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Rather than make each ipn.StateStore implementation guard against
useless writes (a write of the same value that's already in the
store), do writes via a new wrapper that has a fast path for the
unchanged case.
This then fixes profileManager's flood of useless writes to AWS SSM,
etc.
Updates #8785
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
While our `shouldStartDomainRenewal` check is correct, `getCertPEM`
would always bail if the existing cert is not expired. Add the same
`shouldStartDomainRenewal` check to `getCertPEM` to make it proceed with
renewal when existing certs are still valid but should be renewed.
The extra check is expensive (ARI request towards LetsEncrypt), so cache
the last check result for 1hr to not degrade `tailscale serve`
performance.
Also, asynchronous renewal is great for `tailscale serve` but confusing
for `tailscale cert`. Add an explicit flag to `GetCertPEM` to force a
synchronous renewal for `tailscale cert`.
Fixes#8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Instead of renewing certificates based on whether or not they're expired
at a fixed 14-day period in the future, renew based on whether or not
we're more than 2/3 of the way through the certificate's lifetime. This
properly handles shorter-lived certificates without issue.
Updates #8204
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5e82a9cadc427c010d04ce58c7f932e80dd571ea
It was supposed to be best effort but in some cases (macsys at least,
per @marwan-at-work) it hangs and exhausts the whole context.Context
deadline so we fail to make the SetDNS call to the server.
Updates #8067
Updates #3273 etc
Change-Id: Ie1f04abe9689951484748aecdeae312afbafdb0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were checking against the wrong directory, instead if we
have a custom store configured just use that.
Fixes#7588Fixes#7665
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We were not storing the ACME keys in the state store, they would always
be stored on disk.
Updates #7588
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Leave only the HTTP/auth bits in localapi.
Change-Id: I8e23fb417367f1e0e31483e2982c343ca74086ab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I want to move the guts (after the HTTP layer) of the certificate
fetching into the ipnlocal package, out of localapi.
As prep, refactor a bit:
* add a method to do the fetch-from-cert-or-as-needed-with-refresh,
rather than doing it in the HTTP hander
* convert two methods to funcs, taking the one extra field (LocalBackend)
then needed from their method receiver. One of the methods needed
nothing from its receiver.
This will make a future change easier to reason about.
Change-Id: I2a7811e5d7246139927bb86e7db8009bf09b3be3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The GitHub CodeQL scanner flagged the localapi's cert domain usage as a problem
because user input in the URL made it to disk stat checks.
The domain is validated against the ipnstate.Status later, and only
authenticated root/configured users can hit this, but add some
paranoia anyway.
Change-Id: I373ef23832f1d8b3a27208bc811b6588ae5a1ddd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
So you can run Caddy etc as a non-root user and let it have access to
get certs.
Updates caddyserver/caddy#4541
Change-Id: Iecc5922274530e2b00ba107d4b536580f374109b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes "tailscale cert" on Synology where the var directory is
typically like /volume2/@appdata/Tailscale, or any other tailscaled
user who specifies a non-standard state file location.
This is a interim fix on the way to #2932.
Fixes#2927
Updates #2932
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Andrew Lytvynov
Irbe Krumina
Tom Proctor
Maisem Ali
Matt Layher
Claire Wang
Andrew Dunham
David Anderson
M. J. Fromberger
Will Norris
Eng Zer Jun
Andrew Dunham
Mihai Parparita
Josh Bleecher Snyder