Just because we get an HTTP upgrade response over port 80, don't
assume we'll be able to do bi-di Noise over it. There might be a MITM
corp proxy or anti-virus/firewall interfering. Do a bit more work to
validate the connection before proceeding to give up on the TLS port
443 dial.
Updates #4557 (probably fixes)
Change-Id: I0e1bcc195af21ad3d360ffe79daead730dfd86f1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The connections returned from SystemDial are automatically closed when
there is a major link change.
Also plumb through the dialer to the noise client so that connections
are auto-reset when moving from cellular to WiFi etc.
Updates #3363
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Setting keepalive ensures that idle connections will eventually be
closed. In userspace mode, any application configured TCP keepalive is
effectively swallowed by the host kernel, and is not easy to detect.
Failure to close connections when a peer tailscaled goes offline or
restarts may result in an otherwise indefinite connection for any
protocol endpoint that does not initiate new traffic.
This patch does not take any new opinion on a sensible default for the
keepalive timers, though as noted in the TODO, doing so likely deserves
further consideration.
Update #4522
Signed-off-by: James Tucker <james@tailscale.com>
In debugging #4541, I noticed this log print was always empty.
The value printed was always zero at this point.
Updates #4541
Change-Id: I0eef60c32717c293c1c853879446be65d9b2cef6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No CLI support yet. Just the curl'able version if you know the peerapi
port. (like via a TSMP ping)
Updates #306
Change-Id: I0662ba6530f7ab58d0ddb24e3664167fcd1c4bcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Still a little wonky, though. See the tcsetattr error and inability to
hit Ctrl-D, for instance:
bradfitz@laptop ~ % tailscale.app ssh foo@bar
tcsetattr: Operation not permitted
# Authentication checked with Tailscale SSH.
# Time since last authentication: 1h13m22s
foo@bar:~$ ^D
^D
^D
Updates #4518
Updates #4529
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For debugging what's visible inside the macOS sandbox.
But could also be useful for giving users portable commands
during debugging without worrying about which OS they're on.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Tested three macOS Tailscale daemons:
- App Store (Network Extension)
- Standalone (macsys)
- tailscaled
And two types of local IPC each:
- IPN
- HTTP
And two CLI modes:
- sandboxed (running the GUI binary as the CLI; normal way)
- open source CLI hitting GUI (with #4525)
Bonus: simplifies the code.
Fixestailscale/corp#4559
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I've done this a handful of times in the past and again today.
Time to make it a supported thing for the future.
Used while debugging tailscale/corp#4559 (macsys CLI issues)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #2067
This should help us determine if more robust control of edns parameters
+ implementing answer truncation is warranted, given its likely complexity.
Signed-off-by: Tom DNetto <tom@tailscale.com>
One current theory (among other things) on battery consumption is that
magicsock is resorting to using the IPv6 over LTE even on WiFi.
One thing that could explain this is that we do not get link change updates
for the LTE modem as we ignore them in this list.
This commit makes us not ignore changes to `pdp_ip` as a test.
Updates #3363
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This populates DNS suffixes ("ts.net", etc) in /etc/resolver/* files
to point to 100.100.100.100 so MagicDNS works.
It also sets search domains.
Updates #4276
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a typo in the check it was doing `!ok` instead of `ok`, this
restructures it a bit to read better.
Fixes#4506
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This reverts commit 8d6793fd70.
Reason: breaks Android build (cgo/pthreads addition)
We can try again next cycle.
Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Attempt to load the xt_mark kernel module when it is not present. If the
load fails, log error information.
It may be tempting to promote this failure to an error once it has been
in use for some time, so as to avoid reaching an error with the iptables
invocation, however, there are conditions under which the two stages may
disagree - this change adds more useful breadcrumbs.
Example new output from tailscaled running under my WSL2:
```
router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2
```
Background:
There are two places to lookup modules, one is `/proc/modules` "old",
the other is `/sys/module/` "new".
There was query_modules(2) in linux <2.6, alas, it is gone.
In a docker container in the default configuration, you would get
/proc/modules and /sys/module/ both populated. lsmod may work file,
modprobe will fail with EPERM at `finit_module()` for an unpriviliged
container.
In a priviliged container the load may *succeed*, if some conditions are
met. This condition should be avoided, but the code landing in this
change does not attempt to avoid this scenario as it is both difficult
to detect, and has a very uncertain impact.
In an nspawn container `/proc/modules` is populated, but `/sys/module`
does not exist. Modern `lsmod` versions will fail to gather most module
information, without sysfs being populated with module information.
In WSL2 modules are likely missing, as the in-use kernel typically is
not provided by the distribution filesystem, and WSL does not mount in a
module filesystem of its own. Notably the WSL2 kernel supports iptables
marks without listing the xt_mark module in /sys/module, and
/proc/modules is empty.
On a recent kernel, we can ask the capabilities system about SYS_MODULE,
that will help to disambiguate between the non-privileged container case
and just being root. On older kernels these calls may fail.
Update #4329
Signed-off-by: James Tucker <james@tailscale.com>
For tests.
Now that we can always listen (whereas we used to fail prior to
a2c330c496), some goroutine leak
checks were failing in tests in another repo after that change.
Change-Id: Id95a4b71167eca61962a48616d79741b9991e0bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The primary distribution for LinuxMint is based on Ubuntu,
but there is an alternate Debian-based distribution called
LMDE. Both variations identify themselves as "linuxmint"
We added UBUNTU_VERSION to the Ubuntu handling for linuxmint,
the only distribution so far found to do this. Instead, split
linuxmint out into its own case and use either UBUNTU_VERSION
or DEBIAN_VERSION, whichever is present.
Tested on an LMDE 5 (elsie) VM.
Updates https://github.com/tailscale/tailscale/issues/2915
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
$ tailscale debug via 0xb 10.2.0.0/16
fd7a:115c:a1e0:b1a:0🅱️a02:0/112
$ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112
site 11 (0xb), 10.2.0.0/16
Previously: 3ae701f0eb
This adds a little debug tool to do CIDR math to make converting between
those ranges easier for now.
Updates #3616
Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Walter Poupore
Brad Fitzpatrick
Maisem Ali
James Tucker
Tom DNetto
Denton Gentry
David Anderson