The ACME serialization mutex (acmeMu) was a package-level global, and
several ACME-related fields lived on LocalBackend even though the
cert code is conditional and not linked into every binary. With
multiple tsnet.Servers in one process (each its own LocalBackend),
a process-wide acmeMu also serialized unrelated backends.
Introduce a new feature/acme extension that owns the per-LocalBackend
ACME/cert state in an ipnlocal.CertState value:
- acmeMu, renewMu, renewCertAt (previously package globals)
- pendingACMETLSALPNCerts, pendingCertDomains{,Mu},
getCertForTest, certRefreshCancel (previously LocalBackend
fields, only meaningful when ACME was compiled in)
ipnlocal/cert.go now reaches the state through b.certState(), which
is routed by a feature.Hook installed at init by feature/acme. The
CertState type lives in ipnlocal so cert.go can access its fields
directly without a method explosion; the extension in feature/acme
constructs and owns it.
This is a baby step. The end goal is for the entire cert/ACME code
to live in feature/acme, with ipnlocal only retaining whatever thin
hooks the rest of LocalBackend needs to call into it. The current
split (CertState and most of cert.go in ipnlocal, extension wrapper
in feature/acme) is a deliberately temporary middle ground that
keeps this PR small while making the next moves mechanical.
The package is named feature/acme to match the existing HasACME /
ts_omit_acme naming. condregister/maybe_acme.go wires it in for
non-js builds.
Updates #12614
Updates #20248
Updates #20249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I520909f24ad11a9622ef33c2290fe36ad44d6f71
tsdial.Dialer.SetNetMap rebuilt an O(n peers) map of MagicDNS names on
every netmap change. As we move toward per-peer incremental deltas,
this becomes quadratic. This removes it and replaces it with
SetResolveMagicDNS, a callback into LocalBackend that looks up
hostnames from nodeBackend's new nodeByName index (populated alongside
nodeByAddr/nodeByKey on both full and delta paths). The index stores
both FQDNs and short names as keys.
This is the same treatment applied to netlog (8f210454d), wglog
(988b0905b), and drive (1d6989408): stop pushing *netmap.NetworkMap
into subsystems and instead have them pull from LocalBackend's live
data via callbacks.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I24557ab0c8a27636e08e4779bcfd3ec633db0a78
The Logger previously took a *netmap.NetworkMap at Startup and on every
ReconfigNetworkMap call, denormalizing it into per-IP and self lookup
maps. That denormalization is O(n) over all peers and ran on every
netmap update, contributing to the broader quadratic behavior we want
to eliminate when a single peer is added or removed.
Instead, this makes netlog ask LocalBackend (well, nodeBackend) for
the info it needs, letting us remove the netmap.NetworkMap type
entirely from the netlog package.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Ib5f2de96e788a667332c0a6f7ac833b3d0053b5c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
util/def: add def.Bool and def.Duration default parse helpers
Replace multiple instances of def.Bool and def.Duration with a new util/def
package.
Updates #20018
Co-authored-by: Bobby <boby@codelabs.co.id>
Co-authored-by: Simon Law <sfllaw@tailscale.com>
Signed-off-by: Bobby <boby@codelabs.co.id>
Signed-off-by: Simon Law <sfllaw@tailscale.com>
tsnet depends on logpolicy, which in turn depended on util/syspolicy
because of a single LogTarget policy setting it uses.
In this commit, we replace that dependency with a feature.Hook,
which only tailscaled or its platform-specific alternatives should set.
Updates #20031
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for Gokrazy GAF (Gokrazy Archive Format) zip
auto-updates, starting to wire up Tailscale's clientupdate mechanism
to Gokrazy's update mechanism.
Currently there's just a CLI command to update from a GAF URL,
with an --unsigned flag for use in a new natlab vmtest.
Next step would be publishing unstable track GAF files on
pkgs.tailscale.com, with detached signatures, and then making the
clientupdate mechanism also download those and check signatures.
Updates #20002
Change-Id: Ib03c56f17a57f8a4638398ef83549dac4813323d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Introduce a new `tailscale routecheck` command which prints a report
of high-availability routers that are reachable.
This command rhymes with the `tailscale netcheck` command and but
instead of reporting on local network conditions, `routecheck` reports
on remote connectivity.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
In order to support a `tailscale routecheck` command, we introduce the
`/localapi/v0/routecheck` endpoint to the local API. This endpoint
returns the most recent report collected by the routecheck client.
If `force=true` is an argument in the query string, then this endpoint
will actively probe before returning the report.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The routecheck package parallels the netcheck package, where the
former checks routes and routers while the latter checks networks.
Like netcheck, it compiles reports for other systems to consume.
Historically, the client has never known whether a peer is actually
reachable. Most of the time this doesn’t matter, since the client will
want to establish a WireGuard tunnel to any given destination.
However, if the client needs to choose between two or more nodes,
then it should try to choose a node that it can reach.
Suggested exit nodes are one such example, where the client filters
out any nodes that aren’t connected to the control plane. Sometimes an
exit node will get disconnected from the control plane: when the
network between the two is unreliable or when the exit node is too
busy to keep its control connection alive. In these cases, Control
disables the Node.Online flag for the exit node and broadcasts this
across the tailnet. Arguably, the client should never have relied on
this flag, since it only makes sense in the admin console.
This patch implements an initial routecheck client that can probe
every node that your client knows about. You should not ping scan your
visible tailnet, this method is for debugging only.
This patch also introduces a new OnNetMapToggle hook, which fires when
the netmap transitions from nil to non-nil, or vice versa. This
happens either when the client receives its first MapResponse after
connecting to the control plane, or when it clears the netmap while it
is disconnecting. Routecheck uses this to wait for a valid netmap
so it knows which peers to probe.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Emit runtime metrics as clientmetrics when the
NodeAttrEmitRuntimeMetrics NodeCapability is present.
We start small with just 2 metrics: heap bytes and total process memory.
Updates tailscale/corp#39434
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In PR tailscale/corp#30448, we originally decided to break ties using
SHA256 for our rendezvous hashing algorithm. Now that we’ve had some
experience with it, we think that FNV-1a is a better choice. It
distributes bits evenly, it’s much faster, and it doesn’t need to be
cryptographically secure. The FNV designers recommend FNV-1a over the
deprecated FNV-1.
This PR makes the switch and updates the related tests, since changing
the algorithm changes which stable pick gets selected. As of 2026-05,
this is the best time to make this change, since there are almost no
clients in the wild with traffic steering enabled.
Updates #17366
Updates tailscale/corp#29964
Updates tailscale/corp#29966
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The traffic package contains helpers for evaluating traffic steering
scores and picking appropriate nodes. These were extracted from
ipnlocal.suggestExitNodeUsingTrafficSteering so they can be reused by
the new routecheck package to probe exit nodes in priority order.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
RouteCheck, which checks that overlapping routers are reachable, is
enabled by default for both tailscaled and tsnet.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
There are only a couple endpoints that check peer capabilities. Keeping
permission checks with the code that assumes they were performed, rather
than with the routing layer, feels easier to reason about.
Check that the caller is actually a peer and pass their capabilities via
a context value for handlers that want to check them.
Along with this, simplify the helper handler wrappers that are not
needed for most of the endpoints.
Updates #40851
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This drops an indirect dependency on the old github.com/docker/docker
(which was replaced with github.com/moby/moby) and fixes a couple recent
CVEs.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
fixestailscale/corp#39422
Updates tailscale/certstore for properly macOS support and
builds the request signing support into macOS builds. iOS and builds
that do not use cGo are omitted.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Move the ipn/desktop blank import from cmd/tailscaled/tailscaled_windows.go
into feature/condregister/maybe_desktop_sessions.go, consistent with how
all other modular features are registered. tailscaled already imports
feature/condregister, so it still gets ipn/desktop on Windows.
Updates #12614
Change-Id: I92418c4bf0e67f0ab40542e47584762ac0ffa2b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brings in a newer version of Gliderlabs SSH with added socket forwarding support.
Fixes#12409Fixes#5295
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
By polling RTM_GETSTATS via netlink. RTM_GETSTATS is a relatively
efficient and targeted (single device) polling method available since
Linux v4.7.
The tundevstats "feature" can be extended to other platforms in the
future, and it's trivial to add new rtnl_link_stats64 counters on
Linux.
Updates tailscale/corp#38181
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Replace byte-at-a-time ReadByte loops with Peek+Discard in the DERP
read path. Peek returns a slice into bufio's internal buffer without
allocating, and Discard advances the read pointer without copying.
Introduce util/bufiox with a BufferedReader interface and ReadFull
helper that uses Peek+copy+Discard as an allocation-free alternative
to io.ReadFull.
- derp.ReadFrameHeader: replace 5× ReadByte with Peek(5)+Discard(5),
reading the frame type and length directly from the peeked slice.
Remove now-unused readUint32 helper.
name old ns/op new ns/op speedup
ReadFrameHeader-8 24.2 12.4 ~2x
(0 allocs/op in both)
- key.NodePublic.ReadRawWithoutAllocating: replace 32× ReadByte with
bufiox.ReadFull. Addresses the "Dear future" comment about switching
away from byte-at-a-time reads once a non-escaping alternative exists.
name old ns/op new ns/op speedup
NodeReadRawWithoutAllocating-8 140 43.6 ~3.2x
(0 allocs/op in both)
- derpserver.handleFramePing: replace io.ReadFull with bufiox.ReadFull.
Updates tailscale/corp#38509
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
When a client starts up without being able to connect to control, it
sends its discoKey to other nodes it wants to communicate with over
TSMP. This disco key will be a newer key than the one control knows
about.
If the client that can connect to control gets a full netmap, ensure
that the disco key for the node not connected to control is not
overwritten with the stale key control knows about.
This is implemented through keeping track of mapSession and use that for
the discokey injection if it is available. This ensures that we are not
constantly resetting the wireguard connection when getting the wrong
keys from control.
This is implemented as:
- If the key is received via TSMP:
- Set lastSeen for the peer to now()
- Set online for the peer to false
- When processing new keys, only accept keys where either:
- Peer is online
- lastSeen is newer than existing last seen
If mapSession is not available, as in we are not yet connected to
control, punt down the disco key injection to magicsock.
Ideally, we will want to have mapSession be long lived at some point in
the near future so we only need to inject keys in one location and then
also use that for testing and loading the cache, but that is a yak for
another PR.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Introduce a datapathHandler that implements hooks that will
receive packets from the tstun.Wrapper. This commit does not wire
those up just yet.
Perform DNAT from Magic IP to Transit IP on outbound flows on clients,
and reverse SNAT in the reverse direction.
Perform DNAT from Transit IP to final destination IP on outbound flows
on connectors, and reverse SNAT in the reverse direction.
Introduce FlowTable to cache validated flows by 5-tuple for fast lookups
after the first packet.
Flow expiration is not covered, and is intended as future work before
the feature is officially released.
Fixestailscale/corp#34249Fixestailscale/corp#35995
Co-authored-by: Fran Bull <fran@tailscale.com>
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
This makes tsnet apps not depend on x/crypto/ssh and locks that in with a test.
It also paves the wave for tsnet apps to opt-in to SSH support via a
blank feature import in the future.
Updates #12614
Change-Id: Ica85628f89c8f015413b074f5001b82b27c953a9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
After we intercept a DNS response and assign magic and transit addresses
we must communicate the assignment to our connector so that it can
direct traffic when it arrives.
Use the recently added peerapi endpoint to send the addresses.
Updates tailscale/corp#34258
Signed-off-by: Fran Bull <fran@tailscale.com>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
The new version of app connector (conn25) needs to read DNS responses
for domains it is interested in and store and swap out IP addresses.
Add a hook to dns manager to enable this.
Give the conn25 updated netmaps so that it knows when to assign
connecting addresses and from what pool.
Assign an address when we see a DNS response for a domain we are
interested in, but don't do anything with the address yet.
Updates tailscale/corp#34252
Signed-off-by: Fran Bull <fran@tailscale.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
bart has gained a bunch of purported performance and usability
improvements since the current version we are using (0.18.0,
from 1y ago)
Updates tailscale/corp#36982
Signed-off-by: Amal Bansode <amal@tailscale.com>
Polls IMDS (currently only AWS) for extra IPs to advertise as udprelay.
Updates #17796
Change-Id: Iaaa899ef4575dc23b09a5b713ce6693f6a6a6964
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Moves magicksock.cloudInfo into util/cloudinfo with minimal changes.
Updates #17796
Change-Id: I83f32473b9180074d5cdbf00fa31e5b3f579f189
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
When peers request an IP address mapping to be stored, the connector
stores it in memory.
Fixestailscale/corp#34251
Signed-off-by: Fran Bull <fran@tailscale.com>
Adds cmd/cigocacher as the client to cigocached for Go caching over
HTTP. The HTTP cache is best-effort only, and builds will fall back to
disk-only cache if it's not available, much like regular builds.
Not yet used in CI; that will follow in another PR once we have runners
available in this repo with the right network setup for reaching
cigocached.
Updates tailscale/corp#10808
Change-Id: I13ae1a12450eb2a05bd9843f358474243989e967
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This adds the --proxy-protocol flag to 'tailscale serve' and
'tailscale funnel', which tells the Tailscale client to prepend a PROXY
protocol[1] header when making connections to the proxied-to backend.
I've verified that this works with our existing funnel servers without
additional work, since they pass along source address information via
PeerAPI already.
Updates #7747
[1]: https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt
Change-Id: I647c24d319375c1b33e995555a541b7615d2d203
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
In #17639 we moved the subscription into NewLogger to ensure we would not race
subscribing with shutdown of the eventbus client. Doing so fixed that problem,
but exposed another: As we were only servicing events occasionally when waiting
for the network to come up, we could leave the eventbus to stall in cases where
a number of network deltas arrived later and weren't processed.
To address that, let's separate the concerns: As before, we'll Subscribe early
to avoid conflicts with shutdown; but instead of using the subscriber directly
to determine readiness, we'll keep track of the last-known network state in a
selectable condition that the subscriber updates for us. When we want to wait,
we'll wait on that condition (or until our context ends), ensuring all the
events get processed in a timely manner.
Updates #17638
Updates #15160
Change-Id: I28339a372be4ab24be46e2834a218874c33a0d2d
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Merge the connstats package into the netlog package
and unexport all of its declarations.
Remove the buildfeatures.HasConnStats and use HasNetLog instead.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The connstats package was an unnecessary layer of indirection.
It was seperated out of wgengine/netlog so that net/tstun and
wgengine/magicsock wouldn't need a depenedency on the concrete
implementation of network flow logging.
Instead, we simply register a callback for counting connections.
This PR does the bare minimum work to prepare tstun and magicsock
to only care about that callback.
A future PR will delete connstats and merge it into netlog.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The lazy init led to confusion and a belief that was something was
wrong. It's reasonable to expect the daemon to listen on the port at the
time it's configured.
Updates tailscale/corp#33094
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Brad FitzpatrickandBrad Fitzpatrick
Nick KhylandNick Khyl
Jordan WhitedandJordan Whited
Andrew LytvynovandGitHub
James 'zofrex' SandersonandGitHub
Jonathan NobelsandGitHub
Kristoffer DalbyandKristoffer Dalby
Mike O'DriscollandGitHub
Claus LensbølandGitHub
Will NorrisandWill Norris
Amal BansodeandGitHub
Alex ValiushkoandGitHub
Danni PopovaandGitHub
Andrew DunhamandAndrew Dunham
Tom Proctor
Joe TsaiandGitHub