Signed-off-by: Chenyang Gao <gps949@outlook.com>
in commit 6e96744, the tsd system type has been added.
Which will cause the daemon will crash on some OSs (Windows, darwin and so on).
The root cause is that on those OSs, handleSubnetsInNetstack() will return true and set the conf.Router with a wrapper.
Later in NewUserspaceEngine() it will do subsystem set and found that early set router mismatch to current value, then panic.
expvar can only be defined once, so running tests with a repeat counter
will fail if the variables are defined inside of the test function.
Observed failure:
```
--- FAIL: TestHandler (0.00s)
panic: Reuse of exported var name: gauge_promvarz_test_expvar
[recovered]
panic: Reuse of exported var name: gauge_promvarz_test_expvar
goroutine 9 [running]:
testing.tRunner.func1.2({0x100f267e0, 0x1400026e770})
/usr/local/go/src/testing/testing.go:1526 +0x1c8
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1529 +0x364
panic({0x100f267e0, 0x1400026e770})
/usr/local/go/src/runtime/panic.go:884 +0x1f4
log.Panicln({0x140000b8e20?, 0x1a?, 0x1400026e750?})
/usr/local/go/src/log/log.go:398 +0x60
expvar.Publish({0x100e2b21d, 0x1a}, {0x100fd7a08?, 0x140000232c0})
/usr/local/go/src/expvar/expvar.go:284 +0xc0
expvar.NewInt(...)
/usr/local/go/src/expvar/expvar.go:304
tailscale.com/tsweb/promvarz.TestHandler(0x14000082b60)
/Users/charlotte/ts-src/tailscale/tsweb/promvarz/promvarz_test.go:18 +0x5c
testing.tRunner(0x14000082b60, 0x100fd5858)
/usr/local/go/src/testing/testing.go:1576 +0x104
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1629 +0x370
FAIL tailscale.com/tsweb/promvarz 0.149s
```
Fixes#8065
Signed-off-by: James Tucker <james@tailscale.com>
This change bumps the capability version to 62, after support for
sending SSHEventNotificationRequests to control via noise for failure
events was introduced.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change adds a ConnectionID field to both SSHEventNotifyRequest and
CastHeader that identifies the ID of a connection to the SSH server.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change sends an SSHEventNotificationRequest over noise when a
SSH session is set to fail closed and the session is unable to start
because a recorder is not available or a session is terminated because
connection to the recorder is ended. Each of these scenarios have their
own event type.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change renames SSHFailureNotifyRequest to SSHEventNotifyRequest
to better reflect the additional events we could add in the future.
This change also adds an EventType used to catagories the events.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change introduces a NodeKey func on localbackend that returns the
public node key.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was supposed to be best effort but in some cases (macsys at least,
per @marwan-at-work) it hangs and exhausts the whole context.Context
deadline so we fail to make the SetDNS call to the server.
Updates #8067
Updates #3273 etc
Change-Id: Ie1f04abe9689951484748aecdeae312afbafdb0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
`interfaces.Tailscale()` returns all zero values when it finds no
Tailscale interface and encounters no errors. The netns package was
treating no error as a signal that it would receive a non-zero pointer
value leading to nil pointer dereference.
Observed in:
```
--- FAIL: TestGetInterfaceIndex (0.00s)
--- FAIL: TestGetInterfaceIndex/IP_and_port (0.00s)
panic: runtime error: invalid memory address or nil pointer dereference [recovered]
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x2 addr=0x0 pc=0x1029eb7d8]
goroutine 7 [running]:
testing.tRunner.func1.2({0x102a691e0, 0x102bc05c0})
/Users/raggi/.cache/tailscale-go/src/testing/testing.go:1526 +0x1c8
testing.tRunner.func1()
/Users/raggi/.cache/tailscale-go/src/testing/testing.go:1529 +0x384
panic({0x102a691e0, 0x102bc05c0})
/Users/raggi/.cache/tailscale-go/src/runtime/panic.go:884 +0x204
tailscale.com/net/netns.getInterfaceIndex(0x14000073f28, 0x1028d0284?, {0x1029ef3b7, 0xa})
/Users/raggi/src/github.com/tailscale/tailscale/net/netns/netns_darwin.go:114 +0x228
tailscale.com/net/netns.TestGetInterfaceIndex.func2(0x14000138000)
/Users/raggi/src/github.com/tailscale/tailscale/net/netns/netns_darwin_test.go:37 +0x54
testing.tRunner(0x14000138000, 0x140000551b0)
/Users/raggi/.cache/tailscale-go/src/testing/testing.go:1576 +0x10c
created by testing.(*T).Run
/Users/raggi/.cache/tailscale-go/src/testing/testing.go:1629 +0x368
FAIL tailscale.com/net/netns 0.824s
```
Fixes#8064
Signed-off-by: James Tucker <jftucker@gmail.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Periodic update for start of cycle. goreleaser is not updated to v2 yet,
but indirects updated.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
Installer script relies on pkgs.tailscale.com being reachable, both for
checking what Linux distros are supported, but also for actually
downloading repo configuration files, gpg keys and packages themselves.
This change adds a simple reachability check which will print an error
message when pkgs.tailscale.com is not reachable.
Fixes https://github.com/tailscale/corp/issues/8952
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This holds back gvisor, kubernetes, goreleaser, and esbuild, which all
had breaking API changes.
Updates #8043
Updates #7381
Updates #8042 (updates u-root which adds deps)
Change-Id: I889759bea057cd3963037d41f608c99eb7466a5b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We removed it earlier in 916aa782af, but we still want to support it for some time longer.
Updates tailscale/corp#9967
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change introduces address selection for wireguard only endpoints.
If a endpoint has not been used before, an address is randomly selected
to be used based on information we know about, such as if they are able
to use IPv4 or IPv6. When an address is initially selected, we also
initiate a new ICMP ping to the endpoints addresses to determine which
endpoint offers the best latency. This information is then used to
update which endpoint we should be using based on the best possible
route. If the latency is the same for a IPv4 and an IPv6 address, IPv6
will be used.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
In the case where the exit node requires SNAT, we would SNAT all traffic not just the
traffic meant to go through the exit node. This was a result of the default route being
added to the routing table which would match basically everything.
In this case, we need to account for all peers in the routing table not just the ones
that require NAT.
Fix and add a test.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Avoid selecting an endpoint as "better" than the current endpoint if the
total latency improvement is less than 1%. This adds some hysteresis to
avoid flapping between endpoints for a minimal improvement in latency.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If8312e1768ea65c4b4d4e13d8de284b3825d7a73
This passes the *dnscache.Resolver down from the Direct client into the
Noise client and from there into the controlhttp client. This retains
the Resolver so that it can share state across calls instead of creating
a new resolver.
Updates #4845
Updates #6110
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia5d6af1870f3b5b5d7dd5685d775dcf300aec7af
Every time we change `installer.sh`, run it in a few docker
containers based on different Linux distros, just as a simple test.
Also includes a few changes to the installer script itself to make
installation work in docker:
- install dnf config-manager command before running it
- run zypper in non-interactive mode
- update pacman indexes before installing packages
Updates https://github.com/tailscale/corp/issues/8952
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
I need this for a corp change where I have a set as a queue, and make a
different decisison if the set is empty.
Updates tailscale/corp#10344
Signed-off-by: James Tucker <james@tailscale.com>
Can't have a dupe when the dupe is wrong. Clearly we need to up
our spell checking game. Did anyone say AI?
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The action cache restore process either matches the restore key pattern
exactly, or uses a matching prefix with the most recent date.
If the restore key is an exact match, then no updates are uploaded, but
if we've just computed tests executions for more recent code then we
will likely want to use those results in future runs.
Appending run_id to the cache key will give us an always new key, and
then we will be restore a recently uploaded cache that is more likely
has a higher overlap with the code being tested.
Updates #7975
Signed-off-by: James Tucker <james@tailscale.com>
DERP doesn't support HTTP/2. If an HTTP/2 proxy was placed in front of
a DERP server requests would fail because the connection would
be initialized with HTTP/2, which the DERP client doesn't support.
Signed-off-by: Kyle Carberry <kyle@carberry.com>
This change adds a v6conn to the pinger to enable sending pings to v6
addrs.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
We need to always specify tags when creating an AuthKey from an OAuth key.
Check for that, and reuse the `--advertise-tags` param.
Updates #7982
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This fix does not seem ideal, but the test infrastructure using a local
goos doesn't seem to avoid all of the associated challenges, but is
somewhat deeply tied to the setup.
The core issue this addresses for now is that when run on Windows there
can be no code paths that attempt to use an invalid UID string, which on
Windows is described in [1].
For the goos="linux" tests, we now explicitly skip the affected
migration code if runtime.GOOS=="windows", and for the Windows test we
explicitly use the running users uid, rather than just the string
"user1". We also now make the case where a profile exists and has
already been migrated a non-error condition toward the outer API.
Updates #7876
[1] https://learn.microsoft.com/en-us/windows-server/identity/ad-ds/manage/understand-security-identifiers
Signed-off-by: James Tucker <jftucker@gmail.com>
License Updater
Chenyang Gao
James Tucker
Charlotte Brandhorst-Satzkorn
Brad Fitzpatrick
James Tucker
Derek Kaser
Flakes Updater
Maisem Ali
Anton Tolchanov
License Updater
M. J. Fromberger
dependabot[bot]
Charlotte Brandhorst-Satzkorn
Andrew Dunham
Tom DNetto
Denton Gentry
ayanamist
Kyle Carberry