Adds `getTailscaleBrowserSession` to pull the user's session out of
api requests, and `serveTailscaleAuth` to provide the "/api/auth"
endpoint for browser to request auth status and new sessions.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Advertise it on Android (it looks like it already works once advertised).
And both advertise & likely fix it on iOS. Yet untested.
Updates #9672
Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This optionally uploads MAC address(es) to control, then adds a
c2n handler so control can ask a node to send a WoL packet.
Updates #306
RELNOTE=now supports waking up peer nodes on your LAN via Wake-on-LAN packets
Change-Id: Ibea1275fcd2048dc61d7059039abfbaf1ad4f465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Port.Pid was always more of an implementation detail on some
platforms and isn't necessary on Linux so it was never populated.
(Nothing outside the portlist package ever used it)
But might as well populate it for consistency since we have it in
memory and its absence confused people.
Updates #cleanup
Change-Id: I869768a75c9fedeff242a5452206e2b2947a17cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds browser session cache, to be used to store sessions for the
full management web client.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Partially reverts 1bd3edbb46 (but keeps part of it)
iptables is almost always required but not strictly needed. Even if
you can technically run Tailscale without it (by manually configuring
nftables or userspace mode), we still now mark this as "Depends"
because our previous experiment in
https://github.com/tailscale/tailscale/issues/9236 of making it only
Recommends caused too many problems. Until our nftables table is more
mature, we'd rather err on the side of wasting a little disk by
including iptables for people who might not need it rather than
handle reports of it being missing.
Updates #9236
Change-Id: I86cc8aa3f78dafa0b4b729f55fb82eef6066be1c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.
This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.
Updates tailscale/corp#14809
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
Make the 'tailscale debug component-logs' command print the component names for
which extra logging can be turned on, for easier discoverability of debug
functions.
Updates #cleanup
Co-authored-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.
Specifically, UpdateSrcAddr & UpdateDstAddr.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
Now that corp is updated, remove the shim code to bridge the rename from
DefaultMTU() to DefaultTUNMTU.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
When sending a CLI ping with a specific size, continue to probe all possible UDP
paths to the peer until we find one with a large enough MTU to accommodate the
ping. Record any peer path MTU information we discover (but don't use it for
anything other than CLI pings).
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Add a field to record the wire MTU of the path to this address to the
addrLatency struct and rename it addrQuality.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Then use it in tailcfg which had it duplicated a couple times.
I think we have it a few other places too.
And use slices.Equal in wgengine/router too. (found while looking for callers)
Updates #cleanup
Change-Id: If5350eee9b3ef071882a3db29a305081e4cd9d23
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had a misstep with the semantics when applying an optimization that
showed up in the roll into corp. This test ensures that case and related
cases must be retained.
Updates #9410
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
We should be able to freely run `./tool/go generate ./...`, but we're
continually dodging this particular generator. Instead of constantly
dodging it, let's just remove it.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
This reverts commit ee90cd02fd.
The outcome is not identical for empty slices. Cloner really needs
tests!
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
It's no conspiracy that I love learning about new words.
Updates tailscale/corp#14698
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
Prevent future problems like we earlier with go.mod replace directives
(e.g. removing our certstore replace in 6d6cf88d82 or wireguard-go
in ea5ee6f87c, both of which were reactions to problems caused by
go.mod replace in non-root modules, often because people are using tsnet
as a library from another module)
Updates #cleanup
Change-Id: I766715cfa7ce7021460ba4933bd2fa977c3081d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a more generalized package for getting policies.
Updates tailcale/corp#10967
Signed-off-by: Claire Wang <claire@tailscale.com>
Co-authored-by: Adrian Dewhurst <adrian@tailscale.com>
Thanks to @qur and @eric for debugging!
Fixes#6973
Change-Id: Ib2cf8f030cf595cc73dd061c72e78ac19f5fae5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1.50.0 switched containerboot from using `tailscale up`
to `tailscale login`. A side-effect is that a re-usable
authkey is now re-applied on every boot by `tailscale login`,
where `tailscale up` would ignore an authkey if already
authenticated.
Though this looks like it is changing the default, in reality
it is setting the default to match what 1.48 and all
prior releases actually implemented.
Fixes https://github.com/tailscale/tailscale/issues/9539
Fixes https://github.com/tailscale/corp/issues/14953
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Sonia Appasamy
Brad Fitzpatrick
Tom DNetto
Andrew Dunham
Maisem Ali
Andrew Dunham
Jordan Whited
Val
License Updater
Flakes Updater
James Tucker
Claire Wang
Charlotte Brandhorst-Satzkorn
Chris Palmer
Denton Gentry
Andrea Barisani