Instead of waiting for a designated subscription to close as a canary for the
bus being stopped, use the bus Client's own signal for closure added in #17118.
Updates #cleanup
Change-Id: I384ea39f3f1f6a030a6282356f7b5bdcdf8d7102
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Subscribers already have a Done channel that the caller can use to detect when
the subscriber has been closed. Typically this happens when the governing
Client closes, which in turn is typically because the Bus closed.
But clients and subscribers can stop at other times too, and a caller has no
good way to tell the difference between "this subscriber closed but the rest
are OK" and "the client closed and all these subscribers are finished".
We've worked around this in practice by knowing the closure of one subscriber
implies the fate of the rest, but we can do better: Add a Done method to the
Client that allows us to tell when that has been closed explicitly, after all
the publishers and subscribers associated with that client have been closed.
This allows the caller to be sure that, by the time that occurs, no further
pending events are forthcoming on that client.
Updates #15160
Change-Id: Id601a79ba043365ecdb47dd035f1fdadd984f303
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Remove the need for the caller to hold on to and call an unregister
function. Both two callers (one real, one test) already have a context
they can use. Use context.AfterFunc instead. There are no observable
side effects from scheduling too late if the goroutine doesn't run sync.
Updates #17148
Change-Id: Ie697dae0e797494fa8ef27fbafa193bfe5ceb307
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This test ostensibly checks whether we record an error metric if a packet
is dropped because the network is down, but the network connectivity is
irrelevant -- the send error is actually because the arguments to Send()
are invalid:
RebindingUDPConn.WriteWireGuardBatchTo:
[unexpected] offset (0) != Geneve header length (8)
This patch changes the test so we try to send a valid packet, and we
verify this by sending it once before taking the network down. The new
error is:
magicsock: network down
which is what we're trying to test.
We then test sending an invalid payload as a separate test case.
Updates tailscale/corp#22075
Signed-off-by: Alex Chan <alexc@tailscale.com>
endpointState is used for tracking UDP direct connection candidate
addresses. If it contains a DERP addr, then direct connection path
discovery will always send a wasteful disco ping over it. Additionally,
CLI "tailscale ping" via peer relay will race over DERP, leading to a
misleading result if pong arrives via DERP first.
Disco pongs arriving via DERP never influence path selection. Disco
ping/pong via DERP only serves "tailscale ping" reporting.
Updates #17121
Signed-off-by: Jordan Whited <jordan@tailscale.com>
When you say --features=foo,bar, that was supposed to mean
to only show features "foo" and "bar" in the table.
But it was also being used as the set of all features that are
omittable, which was wrong, leading to misleading numbers
when --features was non-empty.
Updates #12614
Change-Id: Idad2fa67fb49c39454032e84a3dede967890fdf5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Unix implementation of doExec propagates error codes by virtue of
the fact that it does an execve; the replacement binary will return the
exit code.
On non-Unix, we need to simulate these semantics by checking for an
ExitError and, when present, passing that value on to os.Exit.
We also add error handling to the doExec call for the benefit of
handling any errors where doExec fails before being able to execute
the desired binary.
Updates https://github.com/tailscale/corp/issues/29940
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This renames the package+symbols in the earlier 17ffa80138 to be
in their own package ("buildfeatures") and start with the word "Has"
like "if buildfeatures.HasFoo {".
Updates #12614
Change-Id: I510e5f65993e5b76a0e163e3aa4543755213cbf6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Extend the client state management to generate a hardware attestation
key if none exists.
Extend MapRequest with HardwareAttestationKey{,Signature} fields that
optionally contain the public component of the hardware attestation key
and a signature of the node's node key using it. This will be used by
control to associate hardware attesation keys with node identities on a
TOFU basis.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
So code (in upcoming PRs) can test for the build tags with consts and
get dead code elimination from the compiler+linker.
Updates #12614
Change-Id: If6160453ffd01b798f09894141e7631a93385941
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a small introduction of the eventbus into controlclient that
communicates with mainly ipnlocal. While ipnlocal is a complicated part
of the codebase, the subscribers here are from the perspective of
ipnlocal already called async.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
This commit fixes an issue within the service reconciler where we end
up in a constant reconciliation loop. When reconciling, the loadbalancer
status is appended to but not reset between each reconciliation, leading
to an ever growing slice of duplicate statuses.
Fixes https://github.com/tailscale/tailscale/issues/17105
Fixes https://github.com/tailscale/tailscale/issues/17107
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit adds a new method to the tsnet.Server type named `Logger`
that returns the underlying logtail instance's Logf method.
This is intended to be used within the Kubernetes operator to wrap its
existing logger in a way such that operator specific logs can also be
sent to control for support & debugging purposes.
Updates https://github.com/tailscale/corp/issues/32037
Signed-off-by: David Bond <davidsbond93@gmail.com>
As of this commit (per the issue), the Taildrive code remains where it
was, but in new files that are protected by the new ts_omit_drive
build tag. Future commits will move it.
Updates #17058
Change-Id: Idf0a51db59e41ae8da6ea2b11d238aefc48b219e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Its doc said its signature matched a std signature, but it used
Tailscale-specific types.
Nowadays it's the caller (func control) that curries the logf/netmon
and returns the std-matching signature.
Updates #cleanup (while answering a question on Slack)
Change-Id: Ic99de41fc6a1c720575a7f33c564d0bcfd9a2c30
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To support integration testing of client features that rely on it, e.g.
peer relay.
Updates tailscale/corp#30903
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Removes ACL edits from e2e tests in favour of trying to simplify the
tests and separate the actual test logic from the environment setup
logic as much as possible. Also aims to fit in with the requirements
that will generally be filled anyway for most devs working on the
operator; in particular using tags that fit in with our documentation.
Updates tailscale/corp#32085
Change-Id: I7659246e39ec0b7bcc4ec0a00c6310f25fe6fac2
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This adds a file that's not compiled by default that exists just to
make it easier to do binary size checks, probing what a binary would
be like if it included reflect methods (as used by html/template, etc).
As an example, once tailscaled uses reflect.Type.MethodByName(non-const-string) anywhere,
the build jumps up by 14.5 MB:
$ GOOS=linux GOARCH=amd64 ./tool/go build -tags=ts_include_cli,ts_omit_webclient,ts_omit_systray,ts_omit_debugeventbus -o before ./cmd/tailscaled
$ GOOS=linux GOARCH=amd64 ./tool/go build -tags=ts_include_cli,ts_omit_webclient,ts_omit_systray,ts_omit_debugeventbus,ts_debug_forcereflect -o after ./cmd/tailscaled
$ ls -l before after
-rwxr-xr-x@ 1 bradfitz staff 41011861 Sep 9 07:28 before
-rwxr-xr-x@ 1 bradfitz staff 55610948 Sep 9 07:29 after
This is particularly pronounced with large deps like the AWS SDK. If you compare using ts_omit_aws:
-rwxr-xr-x@ 1 bradfitz staff 38284771 Sep 9 07:40 no-aws-no-reflect
-rwxr-xr-x@ 1 bradfitz staff 45546491 Sep 9 07:41 no-aws-with-reflect
That means adding AWS to a non-reflect binary adds 2.7 MB but adding
AWS to a reflect binary adds 10 MB.
Updates #17063
Updates #12614
Change-Id: I18e9b77c9cf33565ce5bba65ac5584fa9433f7fb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/tailscale/cli: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
* derp: use client/local instead of deprecated client/tailscale
Updates tailscale/corp#22748
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
I probably could've deflaked this without synctest, but might as well use
it now that Go 1.25 has it.
Fixes#15348
Change-Id: I81c9253fcb7eada079f3e943ab5f1e29ba8e8e31
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* utils/expvarx: mark TestSafeFuncHappyPath as known flaky
Updates #15348
Signed-off-by: Alex Chan <alexc@tailscale.com>
* tstest/integration: mark TestCollectPanic as known flaky
Updates #15865
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
It was a bit confusing that provided history did not include the
current probe results.
Updates tailscale/corp#20583
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Alex Chan
M. J. Fromberger
Paweł Bojanowski
Claus Lensbøl
Brad Fitzpatrick
Mike O'Driscoll
Jordan Whited
Aaron Klotz
Patrick O'Doherty
Will Norris
David Bond
Will Hannah
Tom Proctor
nikiUppal-TS
Nick O'Neill
Alex Chan
License Updater
Anton Tolchanov
James Tucker