Previously, tstun.Wrapper and magicsock.Conn managed their
own statistics data structure and relied on an external call to
Extract to extract (and reset) the statistics.
This makes it difficult to ensure a maximum size on the statistics
as the caller has no introspection into whether the number
of unique connections is getting too large.
Invert the control flow such that a *connstats.Statistics
is registered with tstun.Wrapper and magicsock.Conn.
Methods on non-nil *connstats.Statistics are called for every packet.
This allows the implementation of connstats.Statistics (in the future)
to better control when it needs to flush to ensure
bounds on maximum sizes.
The value registered into tstun.Wrapper and magicsock.Conn could
be an interface, but that has two performance detriments:
1. Method calls on interface values are more expensive since
they must go through a virtual method dispatch.
2. The implementation would need a sync.Mutex to protect the
statistics value instead of using an atomic.Pointer.
Given that methods on constats.Statistics are called for every packet,
we want reduce the CPU cost on this hot path.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
There aren't any in the wild, other than one we ran on purpose to keep
us honest, but we can bump that one forward to 0.100.
Change-Id: I129e70724b2d3f8edf3b496dc01eba3ac5a2a907
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This renames canP2P in magicsock to canP2PLocked to reflect
expectation of mutex lock, fixes a race we discovered in the meantime,
and updates the current stats.
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Jenny Zhang <jz@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There is utility in logging traffic statistics that occurs at the physical layer.
That is, in order to send packets virtually to a particular tailscale IP address,
what physical endpoints did we need to communicate with?
This functionality logs IP addresses identical to
what had always been logged in magicsock prior to #5823,
so there is no increase in PII being logged.
ExtractStatistics returns a mapping of connections to counts.
The source is always a Tailscale IP address (without port),
while the destination is some endpoint reachable on WAN or LAN.
As a special case, traffic routed through DERP will use 127.3.3.40
as the destination address with the port being the DERP region.
This entire feature is only enabled if data-plane audit logging
is enabled on the tailnet (by default it is disabled).
Example of type of information logged:
------------------------------------ Tx[P/s] Tx[B/s] Rx[P/s] Rx[B/s]
PhysicalTraffic: 25.80 3.39Ki 38.80 5.57Ki
100.1.2.3 -> 143.11.22.33:41641 15.40 2.00Ki 23.20 3.37Ki
100.4.5.6 -> 192.168.0.100:41641 10.20 1.38Ki 15.60 2.20Ki
100.7.8.9 -> 127.3.3.40:2 0.20 6.40 0.00 0.00
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We had previously added this to the netcheck report in #5087 but never
copied it into the NetInfo struct. Additionally, add it to log lines so
it's visible to support.
Change-Id: Ib6266f7c6aeb2eb2a28922aeafd950fe1bf5627e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Sets up new file for separate silent disco goroutine, tentatively named
pathfinder for now.
Updates #540
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Jenny Zhang <jz@tailscale.com>
During development of silent disco (#540), an alternate send policy
for magicsock that doesn't wake up the radio frequently with
heartbeats, we want the old & new policies to coexist, like we did
previously pre- and post-disco.
We started to do that earlier in 5c42990c2f but only set up the
env+control knob plumbing to set a bool about which path should be
used.
This starts to add a way for the silent disco code to update the send
path from a separate goroutine. (Part of the effort is going to
de-state-machinify the event based soup that is the current disco
code and make it more Go synchronous style.)
So far this does nothing. (It does add an atomic load on each send
but that should be noise in the grand scheme of things, and a even more
rare atomic store of nil on node config changes.)
Baby steps.
Updates #540
Co-authored-by: Jenny Zhang <jz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The wireguard-go code unfortunately calls this unconditionally
even when verbose logging is disabled.
Partial revert of #5911.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This field seems seldom used and the documentation is wrong.
It is simpler to just derive its original value dynamically
when endpoint.DstToString is called.
This method is potentially used by wireguard-go,
but not in any code path is performance sensitive.
All calls to it use it in conjunction with fmt.Printf,
which is going to be slow anyways since it uses Go reflection.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
- At high data rates more buffer space is required in order to avoid
packet loss during any cause of delay.
- On slower machines more buffer space is required in order to avoid
packet loss while decryption & tun writing is underway.
- On higher latency network paths more buffer space is required in order
to overcome BDP.
- On Linux set with SO_*BUFFORCE to bypass net.core.{r,w}mem_max.
- 7MB is the current default maximum on macOS 12.6
- Windows test is omitted, as Windows does not support getsockopt for
these options.
Signed-off-by: James Tucker <james@tailscale.com>
And add a CLI/localapi and c2n mechanism to enable it for a fixed
amount of time.
Updates #1548
Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes a race condition which caused `c.muCond.Broadcast()` to
never fire in the `firstDerp` if block. It resulted in `Close()`
hanging forever.
Signed-off-by: Kyle Carberry <kyle@carberry.com>
From 5c42990c2f, not yet released in a stable build.
Caught by existing tests.
Fixes#5685
Change-Id: Ia76bb328809d9644e8b96910767facf627830600
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Baby steps towards turning off heartbeat pings entirely as per #540.
This doesn't change any current magicsock functionality and requires additional
changes to send/disco paths before the flag can be turned on.
Updates #540
Change-Id: Idc9a72748e74145b068d67e6dd4a4ffe3932efd0
Signed-off-by: Jenny Zhang <jz@tailscale.com>
Signed-off-by: Jenny Zhang <jz@tailscale.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Fixes an panic in `(*magicsock.Conn).ServeHTTPDebug` when the
`recentPongs` ring buffer for an endpoint wraps around.
Signed-off-by: Colin Adler <colin1adler@gmail.com>
Incoming disco packets are now dropped unless they match one of the
current bound ports, or have a zero port*.
The BPF filter passes all packets with a disco header to the raw packet
sockets regardless of destination port (in order to avoid needing to
reconfigure BPF on rebind).
If a BPF enabled node has just rebound, due to restart or rebind, it may
receive and reply to disco ping packets destined for ports other than
those which are presently bound. If the pong is accepted, the pinging
node will now assume that it can send WireGuard traffic to the pinged
port - such traffic will not reach the node as it is not destined for a
bound port.
*The zero port is ignored, if received. This is a speculative defense
and would indicate a problem in the receive path, or the BPF filter.
This condition is allowed to pass as it may enable traffic to flow,
however it will also enable problems with the same symptoms this patch
otherwise fixes.
Fixes#5536
Signed-off-by: James Tucker <james@tailscale.com>
1f959edeb0 introduced a regression for JS
where the initial bind no longer occurred at all for JS.
The condition is moved deeper in the call tree to avoid proliferation of
higher level conditions.
Updates #5537
Signed-off-by: James Tucker <james@tailscale.com>
Both RebindingUDPConns now always exist. the initial bind (which now
just calls rebind) now ensures that bind is called for both, such that
they both at least contain a blockForeverConn. Calling code no longer
needs to assert their state.
Signed-off-by: James Tucker <james@tailscale.com>
This is entirely optional (i.e. failing in this code is non-fatal) and
only enabled on Linux for now. Additionally, this new behaviour can be
disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable.
Updates #3824
Replaces #5474
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: David Anderson <danderson@tailscale.com>
The Start method was removed in 4c27e2fa22, but the comment on NewConn
still mentioned it doesn't do anything until this method is called.
Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
This adds a lighter mechanism for endpoint updates from control.
Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The version string changed slightly. Adapt.
And always check the current Go version to prevent future
accidental regressions. I would have missed this one had
I not explicitly manually checked it.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Joe Tsai
Brad Fitzpatrick
phirework
Andrew Dunham
James Tucker
Josh Soref
Kyle Carberry
Eng Zer Jun
David Anderson
Colin Adler
Andrew Dunham
Kris Brandow
Maisem Ali
Mihai Parparita
Josh Bleecher Snyder