when tsrecorder receives events, it populates this field with
information about the node the request was sent to.
Updates #17141
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
The lazy init led to confusion and a belief that was something was
wrong. It's reasonable to expect the daemon to listen on the port at the
time it's configured.
Updates tailscale/corp#33094
Signed-off-by: Jordan Whited <jordan@tailscale.com>
I got sidetracked apparently and never finished writing this Clone
code in 316afe7d02 (#17448). (It really should use views instead.)
And then I missed one of the users of "routerChanged" that was broken up
into "routerChanged" vs "dnsChanged".
This broke integration tests elsewhere.
Fixes#17506
Change-Id: I533bf0fcf3da9ac6eb4a6cdef03b8df2c1fb4c8e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update Nix flake to use go 1.25.2
Create the hash from the toolchain rev file automatically from
update-flake.sh
Updates tailscale/go#135
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This patch fixes several issues related to printing login and device
approval URLs, especially when `tailscale up` is interrupted:
1. Only print a login URL that will cause `tailscale up` to complete.
Don't print expired URLs or URLs from previous login attempts.
2. Print the device approval URL if you run `tailscale up` after
previously completing a login, but before approving the device.
3. Use the correct control URL for device approval if you run a bare
`tailscale up` after previously completing a login, but before
approving the device.
4. Don't print the device approval URL more than once (or at least,
not consecutively).
Updates tailscale/corp#31476
Updates #17361
## How these fixes work
This patch went through a lot of trial and error, and there may still
be bugs! These notes capture the different scenarios and considerations
as we wrote it, which are also captured by integration tests.
1. We were getting stale login URLs from the initial IPN state
notification.
When the IPN watcher was moved to before Start() in c011369, we
mistakenly continued to request the initial state. This is only
necessary if you start watching after you call Start(), because
you may have missed some notifications.
By getting the initial state before calling Start(), we'd get
a stale login URL. If you clicked that URL, you could complete
the login in the control server (if it wasn't expired), but your
instance of `tailscale up` would hang, because it's listening for
login updates from a different login URL.
In this patch, we no longer request the initial state, and so we
don't print a stale URL.
2. Once you skip the initial state from IPN, the following sequence:
* Run `tailscale up`
* Log into a tailnet with device approval
* ^C after the device approval URL is printed, but without approving
* Run `tailscale up` again
means that nothing would ever be printed.
`tailscale up` would send tailscaled the pref `WantRunning: true`,
but that was already the case so nothing changes. You never get any
IPN notifications, and in particular you never get a state change to
`NeedsMachineAuth`. This means we'd never print the device approval URL.
In this patch, we add a hard-coded rule that if you're doing a simple up
(which won't trigger any other IPN notifications) and you start in the
`NeedsMachineAuth` state, we print the device approval message without
waiting for an IPN notification.
3. Consider the following sequence:
* Run `tailscale up --login-server=<custom server>`
* Log into a tailnet with device approval
* ^C after the device approval URL is printed, but without approving
* Run `tailscale up` again
We'd print the device approval URL for the default control server,
rather than the real control server, because we were using the `prefs`
from the CLI arguments (which are all the defaults) rather than the
`curPrefs` (which contain the custom login server).
In this patch, we use the `prefs` if the user has specified any settings
(and other code will ensure this is a complete set of settings) or
`curPrefs` if it's a simple `tailscale up`.
4. Consider the following sequence: you've logged in, but not completed
device approval, and you run `down` and `up` in quick succession.
* `up`: sees state=NeedsMachineAuth
* `up`: sends `{wantRunning: true}`, prints out the device approval URL
* `down`: changes state to Stopped
* `up`: changes state to Starting
* tailscaled: changes state to NeedsMachineAuth
* `up`: gets an IPN notification with the state change, and prints
a second device approval URL
Either URL works, but this is annoying for the user.
In this patch, we track whether the last printed URL was the device
approval URL, and if so, we skip printing it a second time.
Signed-off-by: Alex Chan <alexc@tailscale.com>
This patch extends the integration tests for `tailscale up` to include tailnets
where new devices need to be approved. It doesn't change the CLI, because it's
mostly working correctly already -- these tests are just to prevent future
regressions.
I've added support for `MachineAuthorized` to mock control, and I've refactored
`TestOneNodeUpAuth` to be more flexible. It now takes a sequence of steps to
run and asserts whether we got a login URL and/or machine approval URL after
each step.
Updates tailscale/corp#31476
Updates #17361
Signed-off-by: Alex Chan <alexc@tailscale.com>
This commit also shuffles the hasPeerRelayServers atomic load
to happen sooner, reducing the cost for clients with no peer relay
servers.
Updates tailscale/corp#33099
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The hijacker on k8s-proxy's reverse proxy is used to stream recordings
to tsrecorder as they pass through the proxy to the kubernetes api
server. The connection to the recorder was using the client's
(e.g., kubectl) context, rather than a dedicated one. This was causing
the recording stream to get cut off in scenarios where the client
cancelled the context before streaming could be completed.
By using a dedicated context, we can continue streaming even if the
client cancels the context (for example if the client request
completes).
Fixes#17404
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Originally proposed by @bradfitz in #17413.
In practice, a lot of subscribers have only one event type of interest, or a
small number of mostly independent ones. In that case, the overhead of running
and maintaining a goroutine to select on multiple channels winds up being more
noisy than we'd like for the user of the API.
For this common case, add a new SubscriberFunc[T] type that delivers events to
a callback owned by the subscriber, directly on the goroutine belonging to the
client itself. This frees the consumer from the need to maintain their own
goroutine to pull events from the channel, and to watch for closure of the
subscriber.
Before:
s := eventbus.Subscribe[T](eventClient)
go func() {
for {
select {
case <-s.Done():
return
case e := <-s.Events():
doSomethingWith(e)
}
}
}()
// ...
s.Close()
After:
func doSomethingWithT(e T) { ... }
s := eventbus.SubscribeFunc(eventClient, doSomethingWithT)
// ...
s.Close()
Moreover, unless the caller wants to explicitly stop the subscriber separately
from its governing client, it need not capture the SubscriberFunc value at all.
One downside of this approach is that a slow or deadlocked callback could block
client's service routine and thus stall all other subscriptions on that client,
However, this can already happen more broadly if a subscriber fails to service
its delivery channel in a timely manner, it just feeds back more immediately.
Updates #17487
Change-Id: I64592d786005177aa9fd445c263178ed415784d5
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Since #17376, containerboot crashes on startup in k8s because state
encryption is enabled by default without first checking that it's
compatible with the selected state store. Make sure we only default
state encryption to enabled if it's not going to immediately clash with
other bits of tailscaled config.
Updates tailscale/corp#32909
Change-Id: I76c586772750d6da188cc97b647c6e0c1a8734f0
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Saves ~94 KB from the min build.
Updates #12614
Change-Id: I3b0b8a47f80b9fd3b1038c2834b60afa55bf02c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Part of making all netlink monitoring code optional.
Updates #17311 (how I got started down this path)
Updates #12614
Change-Id: Ic80d8a7a44dc261c4b8678b3c2241c3b3778370d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also pull out interface method only needed in Linux.
Instead of having userspace do the call into the router, just let the
router pick up the change itself.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Before we introduced seamless, the "blocked" state was used to track:
* Whether a login was required for connectivity, and therefore we should
keep the engine deconfigured until that happened
* Whether authentication was in progress
"blocked" would stop authReconfig from running. We want this when a login is
required: if your key has expired we want to deconfigure the engine and keep
it down, so that you don't keep using exit nodes (which won't work because
your key has expired).
Taking the engine down while auth was in progress was undesirable, so we
don't do that with seamless renewal. However, not entering the "blocked"
state meant that we needed to change the logic for when to send
LoginFinished on the IPN bus after seeing StateAuthenticated from the
controlclient. Initially we changed the "if blocked" check to "if blocked or
seamless is enabled" which was correct in other places.
In this place however, it introduced a bug: we are sending LoginFinished
every time we see StateAuthenticated, which happens even on a down & up, or
a profile switch. This in turn made it harder for UI clients to track when
authentication is complete.
Instead we should only send it out if we were blocked (i.e. seamless is
disabled, or our key expired) or an auth was in progress.
Updates tailscale/corp#31476
Updates tailscale/corp#32645
Fixes#17363
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Saves 45 KB from the min build, no longer pulling in deephash or
util/hashx, both with unsafe code.
It can actually be more efficient to not use deephash, as you don't
have to walk all bytes of all fields recursively to answer that two
things are not equal. Instead, you can just return false at the first
difference you see. And then with views (as we use ~everywhere
nowadays), the cloning the old value isn't expensive, as it's just a
pointer under the hood.
Updates #12614
Change-Id: I7b08616b8a09b3ade454bb5e0ac5672086fe8aec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Historically, and until recently, --extra-small produced a usable build.
When I recently made osrouter be modular in 39e35379d4 (which is
useful in, say, tsnet builds) after also making netstack modular, that
meant --min now lacked both netstack support for routing and system
support for routing, making no way to get packets into
wireguard. That's not a nice default to users. (we've documented
build_dist.sh in our KB)
Restore --extra-small to making a usable build, and add --min for
benchmarking purposes.
Updates #12614
Change-Id: I649e41e324a36a0ca94953229c9914046b5dc497
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some of the test cases access fields of the backend that are supposed to be
locked while the test is running, which can trigger the race detector. I fixed
a few of these in #17411, but I missed these two cases.
Updates #15160
Updates #17192
Change-Id: I45664d5e34320ecdccd2844e0f8b228145aaf603
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Saves ~53 KB from the min build.
Updates #12614
Change-Id: I73f9544a9feea06027c6ebdd222d712ada851299
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add subscribers for AppConnector events
Make the RouteAdvertiser interface optional We cannot yet remove it because
the tests still depend on it to verify correctness. We will need to separately
update the test fixtures to remove that dependency.
Publish RouteInfo via the event bus, so we do not need a callback to do that.
Replace it with a flag that indicates whether to treat the route info the connector
has as "definitive" for filtering purposes.
Update the tests to simplify the construction of AppConnector values now that a
store callback is no longer required. Also fix a couple of pre-existing racy tests that
were hidden by not being concurrent in the same way production is.
Updates #15160
Updates #17192
Change-Id: Id39525c0f02184e88feaf0d8a3c05504850e47ee
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
If we received a wg engine status while processing an auth URL, there was a
race condition where the authURL could be reset to "" immediately after we
set it.
To fix this we need to check that we are moving from a non-Running state to
a Running state rather than always resetting the URL when we "move" into a
Running state even if that is the current state.
We also need to make sure that we do not return from stopEngineAndWait until
the engine is stopped: before, we would return as soon as we received any
engine status update, but that might have been an update already in-flight
before we asked the engine to stop. Now we wait until we see an update that
is indicative of a stopped engine, or we see that the engine is unblocked
again, which indicates that the engine stopped and then started again while
we were waiting before we checked the state.
Updates #17388
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Co-authored-by: Nick Khyl <nickk@tailscale.com>
Saves ~102 KB from the min build.
Updates #12614
Change-Id: Ie1d4f439321267b9f98046593cb289ee3c4d6249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Due to iOS memory limitations in 2020 (see
https://tailscale.com/blog/go-linker, etc) and wireguard-go using
multiple goroutines per peer, commit 16a9cfe2f4 introduced some
convoluted pathsways through Tailscale to look at packets before
they're delivered to wireguard-go and lazily reconfigure wireguard on
the fly before delivering a packet, only telling wireguard about peers
that are active.
We eventually want to remove that code and integrate wireguard-go's
configuration with Tailscale's existing netmap tracking.
To make it easier to find that code later, this makes it modular. It
saves 12 KB (of disk) to turn it off (at the expense of lots of RAM),
but that's not really the point. The point is rather making it obvious
(via the new constants) where this code even is.
Updates #12614
Change-Id: I113b040f3e35f7d861c457eaa710d35f47cee1cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Explain that this file stays forked from coder/websocket until we can
depend on an upstream release for the helper.
Updates #cleanup
Signed-off-by: kscooo <kscowork@gmail.com>
Tom Meadows
Anton Tolchanov
M. J. Fromberger
Jordan Whited
Brad Fitzpatrick
Mike O'Driscoll
Alex Chan
Claus Lensbøl
James 'zofrex' Sanderson
Tom Proctor
License Updater
kscooo