control/controlbase: use less memory when idle (remove rxState.buf)

Uses 4KB less per Conn.

Fixes #4113

Change-Id: I38d25b1cf5ecf45423404a330b7ecab79a9fb176
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>

control/controlbase/conn.go

@@ -52,10 +52,11 @@ type rxState struct {
 	sync.Mutex
 	cipher    cipher.AEAD
 	nonce     nonce
-	buf       [maxMessageSize]byte
-	n         int    // number of valid bytes in buf
-	next      int    // offset of next undecrypted packet
-	plaintext []byte // slice into buf of decrypted bytes
+	buf       *maxMsgBuffer   // or nil when reads exhausted
+	n         int             // number of valid bytes in buf
+	next      int             // offset of next undecrypted packet
+	plaintext []byte          // slice into buf of decrypted bytes
+	hdrBuf    [headerLen]byte // small buffer used when buf is nil
 }
 
 // txState is all the Conn state that Write uses.
@@ -88,6 +89,10 @@ func (c *Conn) Peer() key.MachinePublic {
 // readNLocked reads into c.rx.buf until buf contains at least total
 // bytes. Returns a slice of the total bytes in rxBuf, or an
 // error if fewer than total bytes are available.
+//
+// It may be called with a nil c.rx.buf only if total == headerLen.
+//
+// On success, c.rx.buf will be non-nil.
 func (c *Conn) readNLocked(total int) ([]byte, error) {
 	if total > maxMessageSize {
 		return nil, errReadTooBig{total}
@@ -96,8 +101,26 @@ func (c *Conn) readNLocked(total int) ([]byte, error) {
 		if total <= c.rx.n {
 			return c.rx.buf[:total], nil
 		}
-
-		n, err := c.conn.Read(c.rx.buf[c.rx.n:])
+		var n int
+		var err error
+		if c.rx.buf == nil {
+			if c.rx.n != 0 || total != headerLen {
+				panic("unexpected")
+			}
+			// Optimization to reduce memory usage.
+			// Most connections are blocked forever waiting for
+			// a read, so we don't want c.rx.buf to be allocated until
+			// we know there's data to read. Instead, when we're
+			// waiting for data to arrive here, read into the
+			// 3 byte hdrBuf:
+			n, err = c.conn.Read(c.rx.hdrBuf[:])
+			if n > 0 {
+				c.rx.buf = getMaxMsgBuffer()
+				copy(c.rx.buf[:], c.rx.hdrBuf[:n])
+			}
+		} else {
+			n, err = c.conn.Read(c.rx.buf[c.rx.n:])
+		}
 		c.rx.n += n
 		if err != nil {
 			return nil, err
@@ -190,6 +213,14 @@ func (c *Conn) decryptOneLocked() error {
 		c.rx.next = 0
 	}
 
+	// Return our buffer to the pool if it's empty, lest we be
+	// blocked in a long Read call, reading the 3 byte header. We
+	// don't to keep that buffer unnecessarily alive.
+	if c.rx.n == 0 && c.rx.next == 0 && c.rx.buf != nil {
+		bufPool.Put(c.rx.buf)
+		c.rx.buf = nil
+	}
+
 	bs, err := c.readNLocked(headerLen)
 	if err != nil {
 		return err
@@ -226,6 +257,12 @@ func (c *Conn) Read(bs []byte) (int, error) {
 	}
 	n := copy(bs, c.rx.plaintext)
 	c.rx.plaintext = c.rx.plaintext[n:]
+
+	// Lose slice's underlying array pointer to unneeded memory so
+	// GC can collect more.
+	if len(c.rx.plaintext) == 0 {
+		c.rx.plaintext = nil
+	}
 	return n, nil
 }
 
@@ -256,7 +293,7 @@ func (c *Conn) Write(bs []byte) (n int, err error) {
 		return 0, net.ErrClosed
 	}
 
-	buf := bufPool.Get().(*maxMsgBuffer)
+	buf := getMaxMsgBuffer()
 	defer bufPool.Put(buf)
 
 	var sent int
@@ -366,3 +403,7 @@ var bufPool = &sync.Pool{
 		return new(maxMsgBuffer)
 	},
 }
+
+func getMaxMsgBuffer() *maxMsgBuffer {
+	return bufPool.Get().(*maxMsgBuffer)
+}

control/controlbase/conn_test.go

@@ -13,10 +13,12 @@ import (
 	"fmt"
 	"io"
 	"net"
+	"runtime"
 	"strings"
 	"sync"
 	"testing"
 	"testing/iotest"
+	"time"
 
 	chp "golang.org/x/crypto/chacha20poly1305"
 	"golang.org/x/net/nettest"
@@ -224,6 +226,81 @@ func TestConnStd(t *testing.T) {
 	})
 }
 
+// tests that the idle memory overhead of a Conn blocked in a read is
+// reasonable (under 2K). It was previously over 8KB with two 4KB
+// buffers for rx/tx. This make sure we don't regress. Hopefully it
+// doesn't turn into a flaky test. If so, const max can be adjusted,
+// or it can be deleted or reworked.
+func TestConnMemoryOverhead(t *testing.T) {
+	num := 1000
+	if testing.Short() {
+		num = 100
+	}
+	ng0 := runtime.NumGoroutine()
+
+	runtime.GC()
+	var ms0 runtime.MemStats
+	runtime.ReadMemStats(&ms0)
+
+	var closers []io.Closer
+	closeAll := func() {
+		for _, c := range closers {
+			c.Close()
+		}
+		closers = nil
+	}
+	defer closeAll()
+
+	for i := 0; i < num; i++ {
+		client, server := pair(t)
+		closers = append(closers, client, server)
+		go func() {
+			var buf [1]byte
+			client.Read(buf[:])
+		}()
+	}
+
+	t0 := time.Now()
+	deadline := t0.Add(3 * time.Second)
+	var ngo int
+	for time.Now().Before(deadline) {
+		runtime.GC()
+		ngo = runtime.NumGoroutine()
+		if ngo >= num {
+			break
+		}
+		time.Sleep(10 * time.Millisecond)
+	}
+	if ngo < num {
+		t.Fatalf("only %v goroutines; expected %v+", ngo, num)
+	}
+	runtime.GC()
+	var ms runtime.MemStats
+	runtime.ReadMemStats(&ms)
+	growthTotal := int64(ms.HeapAlloc) - int64(ms0.HeapAlloc)
+	growthEach := float64(growthTotal) / float64(num)
+	t.Logf("Alloced %v bytes, %.2f B/each", growthTotal, growthEach)
+	const max = 2000
+	if growthEach > max {
+		t.Errorf("allocated more than expected; want max %v bytes/each", max)
+	}
+
+	closeAll()
+
+	// And make sure our goroutines go away too.
+	deadline = time.Now().Add(3 * time.Second)
+	for time.Now().Before(deadline) {
+		ngo = runtime.NumGoroutine()
+		if ngo < ng0+num/10 {
+			break
+		}
+		time.Sleep(10 * time.Millisecond)
+	}
+	if ngo >= ng0+num/10 {
+		t.Errorf("goroutines didn't go back down; started at %v, now %v", ng0, ngo)
+	}
+}
+
 // mkConns creates synthetic Noise Conns wrapping the given net.Conns.
 // This function is for testing just the Conn transport logic without
 // having to muck about with Noise handshakes.