Files
tailscale/cmd/k8s-operator/egress-eps.go
T
BeckyPauleyandGitHub 6ee7bcb458 cmd/{k8s-operator,containerboot,kube}: support IPv6 in egress ProxyGroup (#19898)
* cmd/{k8s-operator,containerboot,k8s-proxy},kube: support IPv6 in egress ProxyGroup

  Add support for dual-stack and IPv6 clusters in egress ProxyGroup.
  Previously, egress ProxyGroup only supported IPv4: the operator and
  containerboot assumed IPv4 for ClusterIP Services, EndpointSlices,
  and health check headers.

  This change introduces the following:

  - Create a per-family EndpointSlice instead of a single IPv4
    EndpointSlice.

  - Update the egress services readiness reconciler to account for
    both IPv4 and IPv6 EndpointSlices.

  - Update the pod readiness reconciler to use the primary Pod IP
    (PodIPs[0]) for readiness checks, instead of hard-coding to use
    IPv4.

  - Update the /healthz handler to return both PodIPv4Header and
    PodIPv6Header.

  - Add an IPv6 address field to egress status.

  - Update containerboot and k8s-proxy to use the new health check
    logic.

Updates tailscale/corp#41677

Change-Id: If66a3146df48c75b1e65a71632bbc9fc75feded2
Signed-off-by: Becky Pauley <becky@tailscale.com>

* cmd/{k8s-operator,containerboot}: improve dual-stack egress ProxyGroup

On dual-stack clusters, an egress ProxyGroup Service has one EndpointSlice
per IP family (IPv4 and IPv6). However, EndpointSlices were only recreated
when the ExternalName Service configuration changed, so a deleted
EndpointSlice was not recreated. The egress readiness reconciler also had
no mechanism to identify which IP families should exist (previously only
an IPv4 EndpoitSlice was required).

We now create an EndpointSlice for every IP family the ClusterIP Service
supports.

Also mark an egress Service NotReady when an EndpointSlice for an expected IP
family (derived from the Service's ClusterIPs) is missing, so a
dual-stack Service missing a family's EndpointSlice is no longer reported
Ready.

Clarify that the egress pre-shutdown and Pod readiness health checks
verify only one IP family on dual-stack clusters.

Change-Id: I35b03daf76ac817cd516e9a731770b2d85f6ee16
Signed-off-by: Becky Pauley <becky@tailscale.com>

---------

Signed-off-by: Becky Pauley <becky@tailscale.com>
2026-07-14 13:26:40 +01:00

238 lines
8.3 KiB
Go

// Copyright (c) Tailscale Inc & contributors
// SPDX-License-Identifier: BSD-3-Clause
//go:build !plan9
package main
import (
"context"
"encoding/json"
"fmt"
"net/netip"
"reflect"
"strings"
"go.uber.org/zap"
corev1 "k8s.io/api/core/v1"
discoveryv1 "k8s.io/api/discovery/v1"
apierrors "k8s.io/apimachinery/pkg/api/errors"
metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
"sigs.k8s.io/controller-runtime/pkg/client"
"sigs.k8s.io/controller-runtime/pkg/reconcile"
"tailscale.com/kube/egressservices"
)
// egressEpsReconciler reconciles EndpointSlices for tailnet services exposed to cluster via egress ProxyGroup proxies.
type egressEpsReconciler struct {
client.Client
logger *zap.SugaredLogger
tsNamespace string
}
// Reconcile reconciles an EndpointSlice for a tailnet service. It updates the EndpointSlice with the endpoints of
// those ProxyGroup Pods that are ready to route traffic to the tailnet service.
// It compares tailnet service state stored in egress proxy state Secrets by containerboot with the desired
// configuration stored in proxy-cfg ConfigMap to determine if the endpoint is ready.
func (er *egressEpsReconciler) Reconcile(ctx context.Context, req reconcile.Request) (res reconcile.Result, err error) {
lg := er.logger.With("Service", req.NamespacedName)
lg.Debugf("starting reconcile")
defer lg.Debugf("reconcile finished")
eps := new(discoveryv1.EndpointSlice)
err = er.Get(ctx, req.NamespacedName, eps)
if apierrors.IsNotFound(err) {
lg.Debugf("EndpointSlice not found")
return reconcile.Result{}, nil
}
if err != nil {
return reconcile.Result{}, fmt.Errorf("failed to get EndpointSlice: %w", err)
}
if !eps.DeletionTimestamp.IsZero() {
lg.Debugf("EnpointSlice is being deleted")
return res, nil
}
// Get the user-created ExternalName Service and use its status conditions to determine whether cluster
// resources are set up for this tailnet service.
svc := &corev1.Service{
ObjectMeta: metav1.ObjectMeta{
Name: eps.Labels[LabelParentName],
Namespace: eps.Labels[LabelParentNamespace],
},
}
err = er.Get(ctx, client.ObjectKeyFromObject(svc), svc)
if apierrors.IsNotFound(err) {
lg.Infof("ExternalName Service %s/%s not found, perhaps it was deleted", svc.Namespace, svc.Name)
return res, nil
}
if err != nil {
return res, fmt.Errorf("error retrieving ExternalName Service: %w", err)
}
// TODO(irbekrm): currently this reconcile loop runs all the checks every time it's triggered, which is
// wasteful. Once we have a Ready condition for ExternalName Services for ProxyGroup, use the condition to
// determine if a reconcile is needed.
oldEps := eps.DeepCopy()
tailnetSvc := tailnetSvcName(svc)
lg = lg.With("tailnet-service-name", tailnetSvc)
// Retrieve the desired tailnet service configuration from the ConfigMap.
proxyGroupName := eps.Labels[labelProxyGroup]
_, cfgs, err := egressSvcsConfigs(ctx, er.Client, proxyGroupName, er.tsNamespace)
if err != nil {
return res, fmt.Errorf("error retrieving tailnet services configuration: %w", err)
}
if cfgs == nil {
// TODO(irbekrm): this path would be hit if egress service was once exposed on a ProxyGroup that later
// got deleted. Probably the EndpointSlices then need to be deleted too- need to rethink this flow.
lg.Debugf("No egress config found, likely because ProxyGroup has not been created")
return res, nil
}
cfg, ok := cfgs[tailnetSvc]
if !ok {
lg.Warnf("configuration for tailnet service %q not found", tailnetSvc)
return res, nil
}
// Check which Pods in ProxyGroup are ready to route traffic to this
// egress service.
podList := &corev1.PodList{}
if err := er.List(ctx, podList, client.MatchingLabels(pgLabels(proxyGroupName, nil))); err != nil {
return res, fmt.Errorf("error listing Pods for ProxyGroup %s: %w", proxyGroupName, err)
}
newEndpoints := make([]discoveryv1.Endpoint, 0)
for _, pod := range podList.Items {
ready, err := er.podIsReadyToRouteTraffic(ctx, pod, &cfg, tailnetSvc, eps.AddressType, lg)
if err != nil {
return res, fmt.Errorf("error verifying if Pod is ready to route traffic: %w", err)
}
if !ready {
continue // maybe next time
}
podIP, err := podIPForFamily(&pod, eps.AddressType)
if err != nil {
return res, fmt.Errorf("error determining Pod IP for %s EndpointSlice: %w", eps.AddressType, err)
}
if podIP == "" {
continue // Pod doesn't have an IP for this address family
}
newEndpoints = append(newEndpoints, discoveryv1.Endpoint{
Hostname: (*string)(&pod.UID),
Addresses: []string{podIP},
Conditions: discoveryv1.EndpointConditions{
Ready: new(true),
Serving: new(true),
Terminating: new(false),
},
})
}
// Note that Endpoints are being overwritten with the currently valid endpoints so we don't need to explicitly
// run a cleanup for deleted Pods etc.
eps.Endpoints = newEndpoints
if !reflect.DeepEqual(eps, oldEps) {
lg.Info("Updating EndpointSlice to ensure traffic is routed to ready proxy Pods")
if err = er.Update(ctx, eps); err != nil {
return res, fmt.Errorf("error updating EndpointSlice: %w", err)
}
}
return res, nil
}
func podIPForFamily(pod *corev1.Pod, addrType discoveryv1.AddressType) (string, error) {
for _, ip := range pod.Status.PodIPs {
parsed, err := netip.ParseAddr(ip.IP)
if err != nil {
return "", fmt.Errorf("error parsing IP address %s: %w", ip, err)
}
switch {
case addrType == discoveryv1.AddressTypeIPv4 && parsed.Is4():
return parsed.String(), nil
case addrType == discoveryv1.AddressTypeIPv6 && parsed.Is6():
return parsed.String(), nil
}
}
return "", nil
}
// podIsReadyToRouteTraffic returns true if it appears that the proxy Pod has configured firewall rules to be able to
// route traffic to the given tailnet service. It retrieves the proxy's state Secret and compares the tailnet service
// status written there to the desired service configuration.
func (er *egressEpsReconciler) podIsReadyToRouteTraffic(ctx context.Context, pod corev1.Pod, cfg *egressservices.Config, tailnetSvcName string, addrType discoveryv1.AddressType, lg *zap.SugaredLogger) (bool, error) {
lg = lg.With("proxy_pod", pod.Name)
lg.Debug("checking whether proxy is ready to route to egress service")
if !pod.DeletionTimestamp.IsZero() {
lg.Debug("proxy Pod is being deleted, ignore")
return false, nil
}
podIP, err := podIPForFamily(&pod, addrType)
switch {
case err != nil:
return false, fmt.Errorf("error determining Pod IP address: %v", err)
case podIP == "":
lg.Debugf("Pod does not have an address for family %s", addrType)
return false, nil
}
stateS := &corev1.Secret{
ObjectMeta: metav1.ObjectMeta{
Name: pod.Name,
Namespace: pod.Namespace,
},
}
err = er.Get(ctx, client.ObjectKeyFromObject(stateS), stateS)
switch {
case apierrors.IsNotFound(err):
lg.Debug("proxy does not yet have a state Secret, waiting...")
return false, nil
case err != nil:
return false, fmt.Errorf("error retrieving state Secret: %w", err)
}
svcStatusBS := stateS.Data[egressservices.KeyEgressServices]
if len(svcStatusBS) == 0 {
lg.Debug("proxy's state Secret does not contain egress services status, waiting...")
return false, nil
}
svcStatus := &egressservices.Status{}
if err = json.Unmarshal(svcStatusBS, svcStatus); err != nil {
return false, fmt.Errorf("error unmarshalling egress service status: %w", err)
}
var statusIP string
switch addrType {
case discoveryv1.AddressTypeIPv4:
statusIP = svcStatus.PodIPv4
case discoveryv1.AddressTypeIPv6:
statusIP = svcStatus.PodIPv6
}
if !strings.EqualFold(podIP, statusIP) {
lg.Infof("proxy's egress service status is for Pod IP %q, current proxy's Pod IP %q, waiting for the proxy to reconfigure...", statusIP, podIP)
return false, nil
}
st, ok := svcStatus.Services[tailnetSvcName]
if !ok {
lg.Infof("proxy's state Secret does not have egress service status, waiting...")
return false, nil
}
if !reflect.DeepEqual(cfg.TailnetTarget, st.TailnetTarget) {
lg.Infof("proxy has configured egress service for tailnet target %q, current target is %q, waiting for proxy to reconfigure...", st.TailnetTarget, cfg.TailnetTarget)
return false, nil
}
if !reflect.DeepEqual(cfg.Ports, st.Ports) {
lg.Debugf("proxy has configured egress service for ports %#+v, wants ports %#+v, waiting for proxy to reconfigure", st.Ports, cfg.Ports)
return false, nil
}
lg.Debug("proxy is ready to route traffic to egress service")
return true, nil
}