We dropped the idea of the Experimental release stage in
tailscale/tailscale-www#7697, in favour of Community Projects.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This method is only needed to migrate between store.FileStore and
tpm.tpmStore. We can make a runtime type assertion instead of
implementing an unused method for every platform.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, the operator checked the ProxyGroup status fields for
information on how many of the proxies had successfully authed. Use
their state Secrets instead as a more reliable source of truth.
containerboot has written device_fqdn and device_ips keys to the
state Secret since inception, and pod_uid since 1.78.0, so there's
no need to use the API for that data. Read it from the state Secret
for consistency. However, to ensure we don't read data from a
previous run of containerboot, make sure we reset containerboot's
state keys on startup.
One other knock-on effect of that is ProxyGroups can briefly be
marked not Ready while a Pod is restarting. Introduce a new
ProxyGroupAvailable condition to more accurately reflect
when downstream controllers can implement flows that rely on a
ProxyGroup having at least 1 proxy Pod running.
Fixes#16327
Change-Id: I026c18e9d23e87109a471a87b8e4fb6271716a66
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add a new `--encrypt-state` flag to `cmd/tailscaled`. Based on that
flag, migrate the existing state file to/from encrypted format if
needed.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit adds a NOTES.txt to the operator helm chart that will be written to the
terminal upon successful installation of the operator.
It includes a small list of knowledgebase articles with possible next steps for
the actor that installed the operator to the cluster. It also provides possible
commands to use for explaining the custom resources.
Fixes#13427
Signed-off-by: David Bond <davidsbond93@gmail.com>
It's one of the slower ones, so split it up into chunks.
Updates tailscale/corp#28679
Change-Id: I16a5ba667678bf238c84417a51dda61baefbecf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Proxies know how to reload configfile on changes since 1.80, which
is going to be the earliest supported proxy version with 1.84 operator,
so remove the mechanism that was updating configfile hash to force
proxy Pod restarts on config changes.
Updates #13032
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
If you had HTTPS_PROXY=https://some-valid-cert.example.com running a
CONNECT proxy, we should've been able to do a TLS CONNECT request to
e.g. controlplane.tailscale.com:443 through that, and I'm pretty sure
it used to work, but refactorings and lack of integration tests made
it regress.
It probably regressed when we added the baked-in LetsEncrypt root cert
validation fallback code, which was testing against the wrong hostname
(the ultimate one, not the one which we were being asked to validate)
Fixes#16222
Change-Id: If014e395f830e2f87f056f588edacad5c15e91bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This patch contains the following cleanups:
1. Simplify `ffcli.Command` definitions;
2. Word-wrap help text, consistent with other commands;
3. `tailscale dns --help` usage makes subcommand usage more obvious;
4. `tailscale dns query --help` describes DNS record types.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The caller of client.RunWatchConnectionLoop may need to be
aware of errors that occur within loop. Add a channel
that notifies of errors to the caller to allow for
decisions to be make as to the state of the client.
Updates tailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
If natc is running on a host with tailscale using `--accept-dns=true`
then a DNS loop can occur. Provide a flag for some specific DNS
upstreams for natc to use instead, to overcome such situations.
Updates #14667
Signed-off-by: James Tucker <james@tailscale.com>
Ensure that if the ProxyGroup for HA Ingress changes, the TLS Secret
and Role and RoleBinding that allow proxies to read/write to it are
updated.
Fixes#16259
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This means the caller does not have to remember to close the reader, and avoids
having to duplicate the logic to decode JSON into events.
Updates #15160
Change-Id: I20186fabb02f72522f61d5908c4cc80b86b8936b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
During a short period of packet loss, a TCP connection to the home DERP
may be maintained. If no other regions emerge as winners, such as when
all regions but one are avoided/disallowed as candidates, ensure that
the current home region, if still active, is not dropped as the
preferred region until it has failed two keepalives.
Relatedly apply avoid and no measure no home to ICMP and HTTP checks as
intended.
Updates tailscale/corp#12894
Updates tailscale/corp#29491
Signed-off-by: James Tucker <james@tailscale.com>
Which can make operating the service more convenient.
It makes sense to put the cluster state with this if specified, so
rearrange the logic to handle that.
Updates #14667
Signed-off-by: Fran Bull <fran@tailscale.com>
Add mesh key support to derpprobe for
probing derpers with verify set to true.
Move MeshKey checking to central point for code reuse.
Fix a bad error fmt msg.
Fixestailscale/corp#27294Fixestailscale/corp#25756
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
We already present a health warning about this, but it is easy to miss
on a server when blackholing traffic makes it unreachable.
In addition to a health warning, present a risk message when exit node
is enabled.
Example:
```
$ tailscale up --exit-node=lizard
The following issues on your machine will likely make usage of exit nodes impossible:
- interface "ens4" has strict reverse-path filtering enabled
- interface "tailscale0" has strict reverse-path filtering enabled
Please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
To skip this warning, use --accept-risk=linux-strict-rp-filter
$
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
- Add tsidp target to build_docker.sh for standard Tailscale image builds
- Add publishdevtsidp Makefile target for development image publishing
- Remove Dockerfile, using standard build process
- Include tsidp in depaware dependency tracking
- Update README with comprehensive Docker usage examples
This enables tsidp to be built and published like other Tailscale components
(tailscale/tailscale, tailscale/k8s-operator, tailscale/k8s-nameserver).
Fixes#16077
Signed-off-by: Raj Singh <raj@tailscale.com>
In 1.84 we made 'tailscale set'/'tailscale up' error out if duplicate
command line flags are passed.
This broke some container configurations as we have two env vars that
can be used to set --accept-dns flag:
- TS_ACCEPT_DNS- specifically for --accept-dns
- TS_EXTRA_ARGS- accepts any arbitrary 'tailscale up'/'tailscale set'
flag.
We default TS_ACCEPT_DNS to false (to make the container behaviour more
declarative), which with the new restrictive CLI behaviour resulted in
failure for users who had set --accept-dns via TS_EXTRA_ARGS as the flag would be
provided twice.
This PR re-instates the previous behaviour by checking if TS_EXTRA_ARGS
contains --accept-dns flag and if so using its value to override TS_ACCEPT_DNS.
Updates tailscale/tailscale#16108
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Using WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG on Windows versions older than Windows 10 1703 (build 15063)
is not supported and causes WinHttpGetProxyForUrl to fail with ERROR_INVALID_PARAMETER. This results in failures
reaching the control on environments where a proxy is required.
We use wingoes version detection to conditionally set the WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG flag
on Windows builds greater than 15063.
While there, we also update proxy detection to use WINHTTP_AUTO_DETECT_TYPE_DNS_A, as DNS-based proxy discovery
might be required with Active Directory and in certain other environments.
Updates tailscale/corp#29168
Fixes#879
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Add comprehensive web interface at ui for managing OIDC clients, similar to tsrecorder's design. Features include list view, create/edit forms with validation, client secret management, delete functionality with confirmation dialogs, responsive design, and restricted tailnet access only.
Fixes#16067
Signed-off-by: Raj Singh <raj@tailscale.com>
In accordance with the OIDC/OAuth 2.0 protocol, do not send an empty
refresh_token and instead omit the field when empty.
Fixes https://github.com/tailscale/tailscale/issues/16073
Signed-off-by: Tim Klocke <taaem@mailbox.org>
Validate that any tags that users have specified via tailscale.com/tags
annotation are valid Tailscale ACL tags.
Validate that no more than one HA Tailscale Kubernetes Services in a single cluster refer
to the same Tailscale Service.
Updates tailscale/tailscale#16054
Updates tailscale/tailscale#16035
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
RELNOTE=Fix CSRF errors in the client Web UI
Replace gorilla/csrf with a Sec-Fetch-Site based CSRF protection
middleware that falls back to comparing the Host & Origin headers if no
SFS value is passed by the client.
Add an -origin override to the web CLI that allows callers to specify
the origin at which the web UI will be available if it is hosted behind
a reverse proxy or within another application via CGI.
Updates #14872
Updates #15065
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
To authenticate mesh keys, the DERP servers used a simple == comparison,
which is susceptible to a side channel timing attack.
By extracting the mesh key for a DERP server, an attacker could DoS it
by forcing disconnects using derp.Client.ClosePeer. They could also
enumerate the public Wireguard keys, IP addresses and ports for nodes
connected to that DERP server.
DERP servers configured without mesh keys deny all such requests.
This patch also extracts the mesh key logic into key.DERPMesh, to
prevent this from happening again.
Security bulletin: https://tailscale.com/security-bulletins#ts-2025-003Fixestailscale/corp#28720
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The same message was used for "up" and "down" permission failures, but
"set" works better for both. Suggesting "up --operator" for a "down"
permission failure was confusing.
It's not like the latter command works in one shot anyway.
Fixes#16008
Change-Id: I6e4225ef06ce2d8e19c40bece8104e254c2aa525
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes the implementation and test from #15208 which apparently
never worked.
Ignore the metacert when counting the number of expected certs
presented.
And fix the test, pulling out the TLSConfig setup code into something
shared between the real cmd/derper and the test.
Fixes#15579
Change-Id: I90526e38e59f89b480629b415f00587b107de10a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reconciler allows users to make applications highly available at L3 by
leveraging Tailscale Virtual Services. Many Kubernetes Service's
(irrespective of the cluster they reside in) can be mapped to a
Tailscale Virtual Service, allowing access to these Services at L3.
Updates #15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Adds Recorder fields to configure the name and annotations of the ServiceAccount
created for and used by its associated StatefulSet. This allows the created Pod
to authenticate with AWS without requiring a Secret with static credentials,
using AWS' IAM Roles for Service Accounts feature, documented here:
https://docs.aws.amazon.com/eks/latest/userguide/iam-roles-for-service-accounts.htmlFixes#15875
Change-Id: Ib0e15c0dbc357efa4be260e9ae5077bacdcb264f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/containerboot,kube/ingressservices: proxy VIPService TCP/UDP traffic to cluster Services
This PR is part of the work to implement HA for Kubernetes Operator's
network layer proxy.
Adds logic to containerboot to monitor mounted ingress firewall configuration rules
and update iptables/nftables rules as the config changes.
Also adds new shared types for the ingress configuration.
The implementation is intentionally similar to that for HA for egress proxy.
Updates tailscale/tailscale#15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Update proxy-to-grafana to strip any X-Webauth prefixed headers passed
by the client in *every* request, not just those to /login.
/api/ routes will also accept these headers to authenticate users,
necessitating their removal to prevent forgery.
Updates tailscale/corp#28687
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Simon Law
Andrew Lytvynov
Tom Proctor
Tom Meadows
Kristoffer Dalby
David Bond
Brad Fitzpatrick
Irbe Krumina
Raj Singh
Mike O'Driscoll
James Tucker
Anton Tolchanov
M. J. Fromberger
Claus Lensbøl
Fran Bull
Raj Singh
Nick Khyl
Tim Klocke
Patrick O'Doherty