Before attempting to enable IPv6 forwarding in the proxy init container
check if the relevant module is found, else the container crashes
on hosts that don't have it.
Updates#11860
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms
* Allow users to pre-create empty state Secrets
* Add a fake internal kube client, test functionality that has dependencies on kube client operations.
* Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist
* Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed
Updates tailscale/tailscale#11170
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Modifies containerboot to wait on tailscaled process
only, not on any child process of containerboot.
Waiting on any subprocess was racing with Go's
exec.Cmd.Run, used to run iptables commands and
that starts its own subprocesses and waits on them.
Containerboot itself does not run anything else
except for tailscaled, so there shouldn't be a need
to wait on anything else.
Updates tailscale/tailscale#11593
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
There is an undocumented 16KiB limit for text log messages.
However, the limit for JSON messages is 256KiB.
Even worse, logging JSON as text results in significant overhead
since each double quote needs to be escaped.
Instead, use logger.Logf.JSON to explicitly log the info as JSON.
We also modify osdiag to return the information as structured data
rather than implicitly have the package log on our behalf.
This gives more control to the caller on how to log.
Updates #7802
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Creates new QNAP builder target, which builds go binaries then uses
docker to build into QNAP packages. Much of the docker/script code
here is pulled over from https://github.com/tailscale/tailscale-qpkg,
with adaptation into our builder structures.
The qnap/Tailscale folder contains static resources needed to build
Tailscale qpkg packages, and is an exact copy of the existing folder
in the tailscale-qpkg repo.
Builds can be run with:
```
sudo ./tool/go run ./cmd/dist build qnap
```
Updates tailscale/tailscale-qpkg#135
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Kubernetes cluster domain defaults to 'cluster.local', but can also be customized.
We need to determine cluster domain to set up in-cluster forwarding to our egress proxies.
This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains.
This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf.
In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'.
Updates tailscale/tailscale#10399,tailscale/tailscale#11445
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Some editions of Windows server share the same build number as their
client counterpart; we must use an additional field found in the OS
version information to distinguish between them.
Even though "Distro" has Linux connotations, it is the most appropriate
hostinfo field. What is Windows Server if not an alternate distribution
of Windows? This PR populates Distro with "Server" when applicable.
Fixes#11785
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The approach is lifted from cobra: `tailscale completion bash` emits a bash
script for configuring the shell's autocomplete:
. <( tailscale completion bash )
so that typing:
tailscale st<TAB>
invokes:
tailscale completion __complete -- st
RELNOTE=tailscale CLI now supports shell tab-completion
Fixes#3793
Signed-off-by: Paul Scott <paul@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
At least in userspace-networking mode.
Fixes#11361
Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Changes made:
* Avoid "encoding/json" for JSON processing, and instead use
"github.com/go-json-experiment/json/jsontext".
Use jsontext.Value.IsValid for validation, which is much faster.
Use jsontext.AppendQuote instead of our own JSON escaping.
* In drainPending, use a different maxLen depending on lowMem.
In lowMem mode, it is better to perform multiple uploads
than it is to construct a large body that OOMs the process.
* In drainPending, if an error is encountered draining,
construct an error message in the logtail JSON format
rather than something that is invalid JSON.
* In appendTextOrJSONLocked, use jsontext.Decoder to check
whether the input is a valid JSON object. This is faster than
the previous approach of unmarshaling into map[string]any and
then re-marshaling that data structure.
This is especially beneficial for network flow logging,
which produces relatively large JSON objects.
* In appendTextOrJSONLocked, enforce maxSize on the input.
If too large, then we may end up in a situation where the logs
can never be uploaded because it exceeds the maximum body size
that the Tailscale logs service accepts.
* Use "tailscale.com/util/truncate" to properly truncate a string
on valid UTF-8 boundaries.
* In general, remove unnecessary spaces in JSON output.
Performance:
name old time/op new time/op delta
WriteText 776ns ± 2% 596ns ± 1% -23.24% (p=0.000 n=10+10)
WriteJSON 110µs ± 0% 9µs ± 0% -91.77% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
WriteText 448B ± 0% 0B -100.00% (p=0.000 n=10+10)
WriteJSON 37.9kB ± 0% 0.0kB ± 0% -99.87% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
WriteText 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
WriteJSON 1.08k ± 0% 0.00k ± 0% -99.91% (p=0.000 n=10+10)
For text payloads, this is 1.30x faster.
For JSON payloads, this is 12.2x faster.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Request ID generation appears prominently in some services cumulative
allocation rate, and while this does not eradicate this issue (the API
still makes UUID objects), it does improve the overhead of this API and
reduce the amount of garbage that it produces.
Updates tailscale/corp#18266
Updates tailscale/corp#19054
Signed-off-by: James Tucker <james@tailscale.com>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
Also capitalises the start of all ShortHelp, allows subcommands to be hidden
with a "HIDDEN: " prefix in their ShortHelp, and adds a TS_DUMP_HELP envknob
to look at all --help messages together.
Fixes#11664
Signed-off-by: Paul Scott <paul@tailscale.com>
And add a test.
Regression from a5e1f7d703Fixestailscale/corp#19036
Change-Id: If90984049af0a4820c96e1f77ddf2fce8cb3043f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/tailscale/cli: respect $KUBECONFIG
* `$KUBECONFIG` is a `$PATH`-like: it defines a *list*.
`tailscale config kubeconfig` works like the rest of the
ecosystem so that if $KUBECONFIG is set it will write to the first existant file in the list, if none exist then
the final entry in the list.
* if `$KUBECONFIG` is an empty string, the old logic takes over.
Notes:
* The logic for file detection is inlined based on what `kind` does.
Technically it's a race condition, since the file could be removed/added
in between the processing steps, but the fallout shouldn't be too bad.
https://github.com/kubernetes-sigs/kind/blob/v0.23.0-alpha/pkg/cluster/internal/kubeconfig/internal/kubeconfig/paths.go
* The sandboxed (App Store) variant relies on a specific temporary
entitlement to access the ~/.kube/config file.
The entitlement is only granted to specific files, and so is not
applicable to paths supplied by the user at runtime.
While there may be other ways to achieve this access to arbitrary
kubeconfig files, it's out of scope for now.
Updates #11645
Signed-off-by: Chloé Vulquin <code@toast.bunkerlabs.net>
After:
bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli
bradfitz@book1pro tailscale.com % ./cli.test
bradfitz@book1pro tailscale.com %
Before:
bradfitz@book1pro tailscale.com % ./tool/go test -c ./cmd/tailscale/cli
bradfitz@book1pro tailscale.com % ./cli.test
Warning: funnel=on for foo.test.ts.net:443, but no serve config
run: `tailscale serve --help` to see how to configure handlers
Warning: funnel=on for foo.test.ts.net:443, but no serve config
run: `tailscale serve --help` to see how to configure handlers
USAGE
funnel <serve-port> {on|off}
funnel status [--json]
Funnel allows you to publish a 'tailscale serve'
server publicly, open to the entire internet.
Turning off Funnel only turns off serving to the internet.
It does not affect serving to your tailnet.
SUBCOMMANDS
status show current serve/funnel status
error: path must be absolute
error: invalid TCP source "localhost:5432": missing port in address
error: invalid TCP source "tcp://somehost:5432"
must be one of: localhost or 127.0.0.1
tcp://somehost:5432error: invalid TCP source "tcp://somehost:0"
must be one of: localhost or 127.0.0.1
tcp://somehost:0error: invalid TCP source "tcp://somehost:65536"
must be one of: localhost or 127.0.0.1
tcp://somehost:65536error: path must be absolute
error: cannot serve web; already serving TCP
You don't have permission to enable this feature.
This also moves the color handling up to a generic spot so it's
not just one subcommand doing it itself. See
https://github.com/tailscale/tailscale/issues/11626#issuecomment-2041795129Fixes#11643
Updates #11626
Change-Id: I3a49e659dcbce491f4a2cb784be20bab53f72303
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
At least in the case of dialing a Tailscale IP.
Updates #4529
Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is primarily for GUIs, so they don't need to remember the most
recently used exit node themselves.
This adds some CLI commands, but they're disabled and behind the WIP
envknob, as we need to consider naming (on/off is ambiguous with
running an exit node, etc) as well as automatic exit node selection in
the future. For now the CLI commands are effectively developer debug
things to test the LocalAPI.
Updates tailscale/corp#18724
Change-Id: I9a32b00e3ffbf5b29bfdcad996a4296b5e37be7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was used when we only supported subnet routers on linux
and would nil out the SubnetRoutes slice as no other router
worked with it, but now we support subnet routers on ~all platforms.
The field it was setting to nil is now only used for network logging
and nowhere else, so keep the field but drop the SubnetRouterWrapper
as it's not useful.
Updates #cleanup
Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The output was changing randomly per run, due to range over a map.
Then some misc style tweaks I noticed while debugging.
Fixes#11629
Change-Id: I67aef0e68566994e5744d4828002f6eb70810ee1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Irbe Krumina
Andrew Lytvynov
Brad Fitzpatrick
Lee Briggs
Joe Tsai
Sonia Appasamy
Aaron Klotz
Percy Wegmann
Paul Scott
dependabot[bot]
Claire Wang
James Tucker
Chloé Vulquin
Maisem Ali
Will Morrison
Charlotte Brandhorst-Satzkorn