* control/controlclient,health,tailcfg: refactor control health messages
Updates tailscale/corp#27759
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Signed-off-by: Paul Scott <408401+icio@users.noreply.github.com>
Co-authored-by: Paul Scott <408401+icio@users.noreply.github.com>
If we get a packet in over some DERP and don't otherwise know how to
reply (no known DERP home or UDP endpoint), this makes us use the
DERP connection on which we received the packet to reply. This will
almost always be our own home DERP region.
This is particularly useful for large one-way nodes (such as
hello.ts.net) that don't actively reach out to other nodes, so don't
need to be told the DERP home of peers. They can instead learn the
DERP home upon getting the first connection.
This can also help nodes from a slow or misbehaving control plane.
Updates tailscale/corp#26438
Change-Id: I6241ec92828bf45982e0eb83ad5c7404df5968bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts most of 124dc10261 (#10401).
Removing in favour of adding this in CapMaps instead (#14829).
Updates tailscale/corp#16016
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
This reverts commit 413fb5b933.
See long story in #14992
Updates #14992
Updates tailscale/corp#26058
Change-Id: I3de7d080443efe47cbf281ea20887a3caf202488
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was a slow memory leak on busy tailnets with lots of tagged
ephemeral nodes.
Updates tailscale/corp#26058
Change-Id: I298e7d438e3ffbb3cde795640e344671d244c632
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This deprecates the old "DERP string" packing a DERP region ID into an
IP:port of 127.3.3.40:$REGION_ID and just uses an integer, like
PeerChange.DERPRegion does.
We still support servers sending the old form; they're converted to
the new form internally right when they're read off the network.
Updates #14636
Change-Id: I9427ec071f02a2c6d75ccb0fcbf0ecff9f19f26f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we add a generic views.ValuePointer type that can be used as a view for pointers
to basic types and struct types that do not require deep cloning and do not have corresponding
view types. Its Get/GetOk methods return stack-allocated shallow copies of the underlying value.
We then update the cmd/viewer codegen to produce getters that return either concrete views
when available or ValuePointer views when not, for pointer fields in generated view types.
This allows us to avoid unnecessary allocations compared to returning pointers to newly
allocated shallow copies.
Updates #14570
Signed-off-by: Nick Khyl <nickk@tailscale.com>
And misc cleanup along the way.
Updates #12912
Change-Id: I0cab148b49efc668c6f5cdf09c740b84a713e388
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
While working on #13390, I ran across this non-idiomatic
pointer-to-view and parallel-sorted-map accounting code that was all
just to avoid a sort later.
But the sort later when building a new netmap.NetworkMap is already a
drop in the bucket of CPU compared to how much work & allocs
mapSession.netmap and LocalBackend's spamming of the full netmap
(potentially tens of thousands of peers, MBs of JSON) out to IPNBus
clients for any tiny little change (node changing online status, etc).
Removing the parallel sorted slice let everything be simpler to reason
about, so this does that. The sort might take a bit more CPU time now
in theory, but in practice for any netmap size for which it'd matter,
the quadratic netmap IPN bus spam (which we need to fix soon) will
overshadow that little sort.
Updates #13390
Updates #1909
Change-Id: I3092d7c67dc10b2a0f141496fe0e7e98ccc07712
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
First we had Capabilities []string. Then
https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a
superset of Capabilities. Except we never really finished the
transition inside the codebase to go all-in on CapMap. This does so.
Notably, this coverts Capabilities on the wire early to CapMap
internally so the code can only deal in CapMap, even against an old
control server.
In the process, this removes PeerChange.Capabilities support, which no
known control plane sent anyway. They can and should use
PeerChange.CapMap instead.
Updates #11508
Updates #4217
Change-Id: I872074e226b873f9a578d9603897b831d50b25d9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When node attributes were super rare, the O(n) slice scans looking for
node attributes was more acceptable. But now more code and more users
are using increasingly more node attributes. Time to make it a map.
Noticed while working on tailscale/corp#17879
Updates #cleanup
Change-Id: Ic17c80341f418421002fbceb47490729048756d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of just checking if a peer capmap is nil, compare the previous
state peer capmap with the new peer capmap.
Updates tailscale/corp#17516
Signed-off-by: Claire Wang <claire@tailscale.com>
In prep for making mapSession's lifetime not be 1:1 with a single HTTP
response's lifetime, this moves the inactivity timer watchdog out of
mapSession and into the caller that owns the streaming HTTP response.
(This is admittedly closer to how it was prior to the mapSession type
existing, but that was before we connected some dots which were
impossible to even see before the mapSession type broke the code up.)
Updates #7175
Change-Id: Ia108dac84a4953db41cbd30e73b1de4a2a676c11
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was a really a mutable field owned by mapSession that we didn't move
in earlier commits.
Once moved, it's then possible to de-func-ify the code and turn it into
a regular method rather than an installed optional hook.
Noticed while working to move map session lifetimes out of
Direct.sendMapRequest's single-HTTP-connection scope.
Updates #7175
Updates #cleanup
Change-Id: I6446b15793953d88d1cabf94b5943bb3ccac3ad9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Tailscale exit nodes provide DNS service over the peer API, however
IsWireGuardOnly nodes do not have a peer API, and instead need client
DNS parameters passed in their node description.
For Mullvad nodes this will contain the in network 10.64.0.1 address.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So even if the server doesn't support sending patches (neither the
Tailscale control server nor Headscale yet do), this makes the client
convert a changed node to its diff so the diffs can be processed
individually in a follow-up change.
This lets us make progress on #1909 without adding a dependency on
finishing the server-side part, and also means other control servers
will get the same upcoming optimizations.
And add some clientmetrics while here.
Updates #1909
Change-Id: I9533bcb8bba5227e17389f0b10dff71f33ee54ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was in SelfNode.Hostinfo anyway. The redundant copy was just
costing us an allocation per netmap (a Hostinfo.Clone).
Updates #1909
Change-Id: Ifac568aa5f8054d9419828489442a0f4559bc099
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now mapSession has a bunch more fields and methods, rather than being
just one massive func with a ton of local variables.
So far there are no major new optimizations, though. It should behave
the same as before.
This has been done with an eye towards testability (so tests can set
all the callback funcs as needed, or not, without a huge Direct client
or long-running HTTP requests), but this change doesn't add new tests
yet. That will follow in the changes which flesh out the NetmapUpdater
interface.
Updates #1909
Change-Id: Iad4e7442d5bbbe2614bd4b1dc4b02e27504898df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And optimize the Persist setting a bit, allocating later and only mutating
fields when there's been a Node change.
Updates #1909
Change-Id: Iaddfd9e88ef76e1d18e8d0a41926eb44d0955312
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was added 2.5 years ago in c1dabd9436 but was never used.
Clearly that migration didn't matter.
We can attempt this again later if/when this matters.
Meanwhile this simplifies the code and thus makes working on other
current efforts in these parts of the code easier.
Updates #1909
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
James Sanderson
Brad Fitzpatrick
Nick Khyl
Maisem Ali
Adrian Dewhurst
Claire Wang
Joe Tsai
Andrew Lytvynov
Tom DNetto
James Tucker