The wireguard-go device now learns its peer set solely from the live
per-peer config source that LocalBackend installs with
Engine.SetPeerConfigFunc, backed by the route manager. Peers are
created lazily on first packet and converged per peer with
Engine.SyncDevicePeer, so the full-peer-list snapshot in wgcfg.Config
and the diff-and-reconfigure machinery around it (wgcfg.Peer,
ReconfigDevice, and the engine's full device sync in
maybeReconfigWireguardLocked) are dead weight: they duplicated state
that the route manager already owns and forced every netmap change to
rebuild and rehash the entire peer list.
Delete the Peers field and the Peer type from wgcfg, along with
ReconfigDevice and maybeReconfigWireguardLocked. Engine.Reconfig no
longer does any device peer work; it only manages the private key,
addresses, and the non-peer subsystems. Full-netmap application converges the device by
syncing exactly the peers whose routes the route manager reports as
changed or removed.
Updates #12542
Change-Id: Ic776e42cfaa5be6b9329b3d381d5cbde17d7078b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, any peer added or removed by an incremental netmap delta
was only visible to wireguard-go after a full authReconfig: wgcfg's
ReconfigDevice re-installed a PeerLookupFunc closing over a freshly
built map of every peer's allowed IPs, doing O(n) work per change.
Instead, install the wireguard-go device hooks once, backed by live
state. Engine.SetPeerConfigFunc installs a single long-lived
PeerLookupFunc that queries LocalBackend's per-node RouteManager on
demand, and Engine.SyncDevicePeer does O(1) per-peer device sync
(remove, or update allowed IPs) as each delta mutation is applied.
Full reconfigs keep an O(n peers) device sync for now, but with no
lookup closure to reinstall and no removed-peer resurrection race; a
later change removes full-config peer syncing entirely.
The RouteManager's PeerAllowedIPs accessor backs the new hooks: its
sorted output makes unchanged state a no-op update, and its peer
filtering mirrors nmcfg.WGCfg, so expired peers and peers predating
both DERP and disco contribute no prefixes and thus cannot be lazily
created in the device, which matters because wireguard-go validates
inbound source IPs against per-peer allowed IPs.
The engine's SetPeerByIPPacketFunc callback is now authoritative when
installed, since LocalBackend's implementation covers subnet routes
and exit-node routes via the RouteManager's outbound table; the
engine's own reconfig-time BART table only serves engines running
without a LocalBackend.
The forced authReconfig on peer add/remove stays for now: the
WireGuard device no longer needs it, but OS routes, the quad-100
resolver's MagicDNS hosts map, and tstun's masquerade/jailed peer
config are still derived from the full peer set. Making those
delta-aware is the next step before gating it.
Updates #12542
Change-Id: I3ba8c7c324bca0ad0269279d03f53b1f17fb63a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Bumps wireguard-go pin to include the roaming endpoints fix, and
two internal enhancements.
Pulls stock wireguard-go for non-tailscale simulation in tests,
to use its endpoint discovery mechanism.
Updates #20082
Change-Id: I2ff282cb7fe4ab099ce5e780a1d40ae86a6a6964
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Replace the UAPI text protocol-based wireguard configuration with
wireguard-go's new direct callback API (SetPeerLookupFunc,
SetPeerByIPPacketFunc, RemoveMatchingPeers, SetPrivateKey).
Instead of computing a trimmed wireguard config ahead of time upon
control plane updates and pushing it via UAPI, install callbacks so
wireguard-go creates peers on demand when packets arrive. This removes
all the LazyWG trimming machinery: idle peer tracking, activity maps,
noteRecvActivity callbacks, the KeepFullWGConfig control knob, and the
ts_omit_lazywg build tag.
For incoming packets, PeerLookupFunc answers wireguard-go's questions
about unknown public keys by looking up the peer in the full config.
For outgoing packets, PeerByIPPacketFunc (installed from
LocalBackend.lookupPeerByIP) maps destination IPs to node public keys
using the existing nodeByAddr index.
Updates tailscale/corp#12345
Change-Id: I4cba80979ac49a1231d00a01fdba5f0c2af95dd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
In rare circumstances (tailscale/corp#3016), the PublicKey
and Endpoints can diverge.
This by itself doesn't cause any harm, but our early exit
in response did, because it prevented us from recovering from it.
Remove the early exit.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming
at all call sites (one real plus several tests).
Fixestailscale/corp#3016.
Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
In DeviceConfig, we did not close r after calling FromUAPI.
If FromUAPI returned early due to an error, then it might
not have read all the data that IpcGetOperation wanted to write.
As a result, IpcGetOperation could hang, as in #3220.
We were also closing the wrong end of the pipe after IpcSetOperation
in ReconfigDevice.
To ensure that we get all available information to diagnose
such a situation, include all errors anytime something goes wrong.
This should fix the immediate crashing problem in #3220.
We'll then need to figure out why IpcGetOperation was failing.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Prefer the error from the actual wireguard-go device method call,
not {To,From}UAPI, as those tend to be less interesting I/O errors.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
When wireguard-go's UAPI interface fails with an error, ReconfigDevice hangs.
Fix that by buffering the channel and closing the writer after the call.
The code now matches the corresponding code in DeviceConfig, where I got it right.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This is mostly code movement from the wireguard-go repo.
Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.
wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.
The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
