Currently, when SetNetInfo is called it sets the value on
hostinfo.NetInfo. However, when SetHostInfo is called it overwrites the
hostinfo field which may mean it also clears out the NetInfo it had just
received.
This commit stores NetInfo separately and combines it into Hostinfo as
needed so that control is always notified of the latest values.
Also, remove unused copies of Hostinfo from ipn.Status and
controlclient.Auto.
Updates #tailscale/corp#4824 (maybe fixes)
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Currently the ssh session isn't terminated cleanly, instead the packets
are just are no longer routed to the in-proc SSH server. This makes it
so that clients get a disconnection when the `RunSSH` pref changes to
`false`.
Updates #3802
Signed-off-by: Maisem Ali <maisem@tailscale.com>
No callers remain (last one was removed with
tailscale/corp@1c095ae08fcc21362db65035a117672a71b4a081), and it's
pretty esoteric.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The Mac client was using it, but it had the effect of the `RouteAll`
("Use Tailscale subnets") pref always being enabled at startup,
regardless of the persisted value.
enforceDefaults was added to handle cases from ~2 years ago where
we ended up with persisted `"RouteAll": false` values in the keychain,
but that should no longer be a concern. New users will get the default
of it being enabled via `NewPrefs`.
There will be a corresponding Mac client change to stop passing in
enforceDefaults.
For #3962
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The connections returned from SystemDial are automatically closed when
there is a major link change.
Also plumb through the dialer to the noise client so that connections
are auto-reset when moving from cellular to WiFi etc.
Updates #3363
Signed-off-by: Maisem Ali <maisem@tailscale.com>
For tests.
Now that we can always listen (whereas we used to fail prior to
a2c330c496), some goroutine leak
checks were failing in tests in another repo after that change.
Change-Id: Id95a4b71167eca61962a48616d79741b9991e0bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Two changes in one:
* make DoH upgrades an explicitly scheduled send earlier, when we come
up with the resolvers-and-delay send plan. Previously we were
getting e.g. four Google DNS IPs and then spreading them out in
time (for back when we only did UDP) but then later we added DoH
upgrading at the UDP packet layer, which resulted in sometimes
multiple DoH queries to the same provider running (each doing happy
eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs.
Instead, take those 4 Google/Cloudflare IPs and schedule 5 things:
first the DoH query (which can use all 4 IPs), and then each of the
4 IPs as UDP later.
* clean up the dnstype.Resolver.Addr confusion; half the code was
using it as an IP string (as documented) as half was using it as
an IP:port (from some prior type we used), primarily for tests.
Instead, document it was being primarily an IP string but also
accepting an IP:port for tests, then add an accessor method on it
to get the IPPort and use that consistently everywhere.
Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fail on unsupported platforms (must be Linux or macOS tailscaled with
WIP env) or when disabled by admin (with TS_DISABLE_SSH_SERVER=1)
Updates #3802
Change-Id: I5ba191ed0d8ba4ddabe9b8fc1c6a0ead8754b286
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And rename to updateFilterLocked to prevent future mistakes.
Fixes#4427
Change-Id: I4d37b90027d5ff872a339ce8180f5723704848dc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Remove the weird netstack -> tailssh dependency and instead have tailssh
register itself with ipnlocal when linked.
This makes tailssh.server a singleton, so we can have a global map of
all sessions.
Updates #3802
Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently peerIPs doesn't do any sorting of the routes it returns. This
is typically fine, however imagine the case of an HA subnet router
failover. When a route R moves from peer A to peer B, the output of
peerIPs changes. This in turn causes all the deephash check inside
wgengine to fail as the hashed value of [R1, R2] is different than
the hashed value of [R2, R1]. When the hash check failes, it causes
wgengine to reconfigure all routes in the OS. This is especially
problematic for macOS and iOS where we use the NetworkExtension.
This commit makes it that the peerIPs are always sorted when returned,
thus making the hash be consistent as long as the list of routes remains
static.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)
e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:
tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112
(112 being /128 minuse the /96 v6 prefix length)
Then people in my tailnet can:
$ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....
Updates #3616, etc
RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes
Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Combine the code between `LocalBackend.CheckIPForwarding` and
`controlclient.ipForwardingBroken`.
Fixes#4300
Signed-off-by: Maisem Ali <maisem@tailscale.com>
When `setWgengineStatus` is invoked concurrently from multiple
goroutines, it is possible that the call invoked with a newer status is
processed before a call with an older status. e.g. a status that has
endpoints might be followed by a status without endpoints. This causes
unnecessary work in the engine and can result in packet loss.
This patch adds an `AsOf time.Time` field to the status to specifiy when the
status was calculated, which later allows `setWgengineStatus` to ignore
any status messages it receives that are older than the one it has
already processed.
Updates tailscale/corp#2579
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Also make IPPrefixSliceOf use Slice[netaddr.IPPrefix] as it also
provides additional functions besides the standard ones provided by
Slice[T].
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And add a CapabilityVersion type, primarily for documentation.
This makes MapRequest.Version, RegisterRequest.Version, and
SetDNSRequest.Version all use the same version, which will avoid
confusing in the future if Register or SetDNS ever changed their
semantics on Version change. (Currently they're both always 1)
This will requre a control server change to allow a
SetDNSRequest.Version value other than 1 to be deployed first.
Change-Id: I073042a216e0d745f52ee2dbc45cf336b9f84b7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
e.g. the change to ipnlocal in this commit ultimately logs out:
{"logtail":{"client_time":"2022-02-17T20:40:30.511381153-08:00","server_time":"2022-02-18T04:40:31.057771504Z"},"type":"Hostinfo","val":{"GoArch":"amd64","Hostname":"tsdev","IPNVersion":"1.21.0-date.20220107","OS":"linux","OSVersion":"Debian 11.2 (bullseye); kernel=5.10.0-10-amd64"},"v":1}
Change-Id: I668646b19aeae4a2fed05170d7b279456829c844
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(The name SSH_HostKeys is bad but SSHHostKeys is worse.)
Updates #3802
Change-Id: I2a889019c9e8b065b668dd58140db4fcab868a91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We need to capture some tailnet-related information for some Docker
features we're building. This exposes the tailnet name and MagicDNS
information via `tailscale status --json`.
Fixestailscale/corp#3670
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
Our previous Hostinfo logging was all as a side effect of telling
control. And it got marked as verbose (as it was)
This adds a one-time Hostinfo logging that's not verbose, early in
start-up.
Change-Id: I1896222b207457b9bb12ffa7cf361761fa4d3b3a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're finding a bunch of host operating systems/firewalls interact poorly
with peerapi. We either get ICMP errors from the host or users need to run
commands to allow the peerapi port:
https://github.com/tailscale/tailscale/issues/3842#issuecomment-1025133727
... even though the peerapi should be an internal implementation detail.
Rather than fight the host OS & firewalls, this change handles the
server side of peerapi entirely in netstack (except on iOS), so it
never makes its way to the host OS where it might be messed with. Two
main downsides are:
1) netstack isn't as fast, but we don't really need speed for peerapi.
And actually, with fewer trips to/from the kernel, we might
actually make up for some of the netstack performance loss by
staying in userspace.
2) tcpdump / Wireshark etc packet captures will no longer see the peerapi
traffic. Oh well. Crawshaw's been wanting to add packet capture server
support to tailscaled, so we'll probably do that sooner now.
A future change might also then use peerapi for the client-side
(except on iOS).
Updates #3842 (probably fixes, as well as many exit node issues I bet)
Change-Id: Ibc25edbb895dc083d1f07bd3cab614134705aa39
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Disabled by default.
To use, run tailscaled with:
TS_SSH_ALLOW_LOGIN=you@bar.com
And enable with:
$ TAILSCALE_USE_WIP_CODE=true tailscale up --ssh=true
Then ssh [any-user]@[your-tailscale-ip] for a root bash shell.
(both the "root" and "bash" part are temporary)
Updates #3802
Change-Id: I268f8c3c95c8eed5f3231d712a5dc89615a406f0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixes#3660
RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled.
Change-Id: I001e983df5feeb65289abe5012dedd177b841b45
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Maisem Ali
Brad Fitzpatrick
James Tucker
Tom DNetto
Mihai Parparita
Maisem Ali
Nick O'Neill
Ross Zurowski