The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Removes 434 KB from the minimal Linux binary, or ~3%.
Primarily this comes from not linking in the zstd encoding code.
Fixes#17323
Change-Id: I0a90de307dfa1ad7422db7aa8b1b46c782bfaaf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Re-use a pre-allocated bytes.Buffer struct and
shallow the copy the result of bytes.NewBuffer into it
to avoid allocating the struct.
Note that we're only reusing the bytes.Buffer struct itself
and not the underling []byte temporarily stored within it.
Updates #cleanup
Updates tailscale/corp#18514
Updates golang/go#67004
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Changes made:
* Avoid "encoding/json" for JSON processing, and instead use
"github.com/go-json-experiment/json/jsontext".
Use jsontext.Value.IsValid for validation, which is much faster.
Use jsontext.AppendQuote instead of our own JSON escaping.
* In drainPending, use a different maxLen depending on lowMem.
In lowMem mode, it is better to perform multiple uploads
than it is to construct a large body that OOMs the process.
* In drainPending, if an error is encountered draining,
construct an error message in the logtail JSON format
rather than something that is invalid JSON.
* In appendTextOrJSONLocked, use jsontext.Decoder to check
whether the input is a valid JSON object. This is faster than
the previous approach of unmarshaling into map[string]any and
then re-marshaling that data structure.
This is especially beneficial for network flow logging,
which produces relatively large JSON objects.
* In appendTextOrJSONLocked, enforce maxSize on the input.
If too large, then we may end up in a situation where the logs
can never be uploaded because it exceeds the maximum body size
that the Tailscale logs service accepts.
* Use "tailscale.com/util/truncate" to properly truncate a string
on valid UTF-8 boundaries.
* In general, remove unnecessary spaces in JSON output.
Performance:
name old time/op new time/op delta
WriteText 776ns ± 2% 596ns ± 1% -23.24% (p=0.000 n=10+10)
WriteJSON 110µs ± 0% 9µs ± 0% -91.77% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
WriteText 448B ± 0% 0B -100.00% (p=0.000 n=10+10)
WriteJSON 37.9kB ± 0% 0.0kB ± 0% -99.87% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
WriteText 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
WriteJSON 1.08k ± 0% 0.00k ± 0% -99.91% (p=0.000 n=10+10)
For text payloads, this is 1.30x faster.
For JSON payloads, this is 12.2x faster.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This is based on empirical testing using actual logs data.
FastestCompression only incurs a marginal <1% compression ratio hit
for a 2.25x reduction in memory use for small payloads
(which are common if log uploads happen at a decently high frequency).
The memory savings for large payloads is much lower
(less than 1.1x reduction).
LowMemory only incurs a marginal <5% hit on performance
for a 1.6-2.0x reduction in memory use for small or large payloads.
The memory gains for both settings justifies the loss of benefits,
which are arguably minimal.
tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Rather than pass around a scratch buffer, put it on the Logger.
This is a baby step towards removing the background uploading
goroutine and starting it as needed.
Updates tailscale/corp#18514 (insofar as it led me to look at this code)
Change-Id: I6fd94581c28bde40fdb9fca788eb9590bcedae1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
io.Writer says you need to write completely on err=nil. (the result
int should be the same as the input buffer length)
We weren't doing that. We used to, but at some point the verbose
filtering was modifying buf before the final return of len(buf).
We've been getting lucky probably, that callers haven't looked at our
results and turned us into a short write error.
Updates #cleanup
Updates tailscale/corp#15664
Change-Id: I01e765ba35b86b759819e38e0072eceb9d10d75c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The retry logic was pathological in the following ways:
* If we restarted the logging service, any pending uploads
would be placed in a retry-loop where it depended on backoff.Backoff,
which was too aggresive. It would retry failures within milliseconds,
taking at least 10 retries to hit a delay of 1 second.
* In the event where a logstream was rate limited,
the aggressive retry logic would severely exacerbate the problem
since each retry would also log an error message.
It is by chance that the rate of log error spam
does not happen to exceed the rate limit itself.
We modify the retry logic in the following ways:
* We now respect the "Retry-After" header sent by the logging service.
* Lacking a "Retry-After" header, we retry after a hard-coded period of
30 to 60 seconds. This avoids the thundering-herd effect when all nodes
try reconnecting to the logging service at the same time after a restart.
* We do not treat a status 400 as having been uploaded.
This is simply not the behavior of the logging service.
Updates #tailscale/corp#11213
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Using log.Printf may end up being printed out to the console, which
is not desirable. I noticed this when I was investigating some client
logs with `sockstats: trace "NetcheckClient" was overwritten by another`.
That turns to be harmless/expected (the netcheck client will fall back
to the DERP client in some cases, which does its own sockstats trace).
However, the log output could be visible to users if running the
`tailscale netcheck` CLI command, which would be needlessly confusing.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Split apart polling of sockstats and logging them to disk. Add a 3
second delay before writing logs to disk to prevent an infinite upload
loop when uploading stats to logcatcher.
Fixes#7719
Signed-off-by: Will Norris <will@tailscale.com>
Effectively reverts #249, since the server side was fixed (with #251?)
to send a 200 OK/content-length 0 response.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The 255 byte limit was chosen more than 3 years ago (tailscale/corp@929635c9d98642d34ac735e0c2004f6d3d53c706),
when iOS was operating under much more significant memory constraints.
With iOS 15 the network extension has an increased limit, so increasing
it to 4K should be fine.
The motivating factor was that the network interfaces being logged
by linkChange in wgengine/userspace.go were getting truncated, and it
would be useful to know why in some cases we're choosing the pdp_ip1
cell interface instead of the pdp_ip0 one.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Instead of a static FlushDelay configuration value, use a FlushDelayFn
function that we invoke every time we decide send logs. This will allow
mobile clients to be more dynamic about when to send logs.
Updates #6768
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Per chat. This is close enough to realtime but massively reduces
number of HTTP requests. (which you can verify with
TS_DEBUG_LOGTAIL_WAKES and watching tailscaled run at start)
By contrast, this is set to 2 minutes on mobile.
Change-Id: Id737c7924d452de5c446df3961f5e94a43a33f1f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The mobile implementation had a 2 minute ticker going all the time
to do a channel send. Instead, schedule it as needed based on activity.
Then we can be actually idle for long periods of time.
Updates #3363
Change-Id: I0dba4150ea7b94f74382fbd10db54a82f7ef6c29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upstream optimizations to the Go time package will make
unmarshaling of time.Time 3-6x faster. See:
* https://go.dev/cl/425116
* https://go.dev/cl/425197
* https://go.dev/cl/429862
The last optimization avoids a []byte -> string allocation
if the timestamp string less than than 32B.
Unfortunately, the presence of a timezone breaks that optimization.
Drop recording of timezone as this is non-essential information.
Most of the performance gains is upon unmarshal,
but there is also a slight performance benefit to
not marshaling the timezone as well.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The copy ID operates similar to a CC in email where
a message is sent to both the primary ID and also the copy ID.
A given log message is uploaded once, but the log server
records it twice for each ID.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Just reading the code again in prep for some alloc reductions.
Change-Id: I065226ea794b7ec7144c2b15942d35131c9313a8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves some allocs. Not hot, but because we can now.
And a const instead of a var.
Change-Id: Ieb2b64534ed38051c36b2c0aa2e82739d9d0e015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allows instances that are running with the same machine ID (due to
cloning) to be distinguished.
Also adds sequence numbers to detect duplicates.
For tailscale/corp#5244
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
For people running self-hosted control planes who want a global
opt-out knob instead of running their own logcatcher.
Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Claus Lensbøl
Brad Fitzpatrick
Joe Tsai
Anton Tolchanov
Maisem Ali
as2643
Claire Wang
Mihai Parparita
Will Norris
David Crawshaw
Josh Soref
Eng Zer Jun
Josh Bleecher Snyder