Previously, we used a non-nil Location as an indicator that a peer is a Mullvad exit node.
However, this is not, or no longer, reliable, since regular exit nodes may also have a non-nil Location,
such as when traffic steering is enabled for a tailnet.
In this PR, we update the plaintext `tailscale status` output to omit only Mullvad exit nodes, rather than all
exit nodes with a non-nil Location. The JSON output remains unchanged and continues to include all peers.
Updates tailscale/corp#30614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a advertise subcommand for tailscale serve, that would declare the node
as a service proxy for a service. This command only adds the service to node's list of
advertised service, but doesn't modify the list of services currently advertised.
Fixestailscale/corp#28016
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This commit reverts the key of Web field in ipn.ServiceConfig to use FQDN instead of service
name for the host part of HostPort. This change is because k8s operator already build base on
the assumption of the part being FQDN. We don't want to break the code with dependency.
Fixestailscale/corp#30695
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* Modifies the k8s-proxy to expose health check and metrics
endpoints on the Pod's IP.
* Moves cmd/containerboot/healthz.go and cmd/containerboot/metrics.go to
/kube to be shared with /k8s-proxy.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
Updates k8s-proxy's config so its auth mode config matches that we set
in kube-apiserver ProxyGroups for consistency.
Updates #13358
Change-Id: I95e29cec6ded2dc7c6d2d03f968a25c822bc0e01
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The Kubernetes API server proxy is getting the ability to serve on a
Tailscale Service instead of individual node names. Update the configure
kubeconfig sub-command to accept arguments that look like a Tailscale
Service. Note, we can't know for sure whether a peer is advertising a
Tailscale Service, we can only guess based on the ExtraRecords in the
netmap and that IP showing up in a peer's AllowedIPs.
Also adds an --http flag to allow targeting individual proxies that can
be adverting on http for their node name, and makes the command a bit
more forgiving on the range of inputs it accepts and how eager it is to
print the help text when the input is obviously wrong.
Updates #13358
Change-Id: Ica0509c6b2c707252a43d7c18b530ec1acf7508f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the kubernetes operator's `DNSConfig` resource
with the addition of a new field at `nameserver.service.clusterIP`.
This field allows users to specify a static in-cluster IP address of
the nameserver when deployed.
Fixes#14305
Signed-off-by: David Bond <davidsbond93@gmail.com>
Adds a new reconciler for ProxyGroups of type kube-apiserver that will
provision a Tailscale Service for each replica to advertise. Adds two
new condition types to the ProxyGroup, TailscaleServiceValid and
TailscaleServiceConfigured, to post updates on the state of that
reconciler in a way that's consistent with the service-pg reconciler.
The created Tailscale Service name is configurable via a new ProxyGroup
field spec.kubeAPISserver.ServiceName, which expects a string of the
form "svc:<dns-label>".
Lots of supporting changes were needed to implement this in a way that's
consistent with other operator workflows, including:
* Pulled containerboot's ensureServicesUnadvertised and certManager into
kube/ libraries to be shared with k8s-proxy. Use those in k8s-proxy to
aid Service cert sharing between replicas and graceful Service shutdown.
* For certManager, add an initial wait to the cert loop to wait until
the domain appears in the devices's netmap to avoid a guaranteed error
on the first issue attempt when it's quick to start.
* Made several methods in ingress-for-pg.go and svc-for-pg.go into
functions to share with the new reconciler
* Added a Resource struct to the owner refs stored in Tailscale Service
annotations to be able to distinguish between Ingress- and ProxyGroup-
based Services that need cleaning up in the Tailscale API.
* Added a ListVIPServices method to the internal tailscale client to aid
cleaning up orphaned Services
* Support for reading config from a kube Secret, and partial support for
config reloading, to prevent us having to force Pod restarts when
config changes.
* Fixed up the zap logger so it's possible to set debug log level.
Updates #13358
Change-Id: Ia9607441157dd91fb9b6ecbc318eecbef446e116
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit removes the advertise command for service. The advertising is now embedded into
serve command and unadvertising is moved to drain subcommand
Fixestailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: add clear subcommand for serve services
This commit adds a clear subcommand for serve command, to remove all config for a passed service.
This is a short cut for user to remove services after they drain a service. As an indipendent command
it would avoid accidently remove a service on typo.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* update regarding comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* log when clearing a non-existing service but not error
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: add drain subCommand for serve
This commit adds the drain subcommand for serving services. After we merge advertise and serve service as one step,
we now need a way to unadvertise service and this is it.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* move runServeDrain and some update regarding pr comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* some code structure change
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Make it possible to dump the eventbus graph as JSON or DOT to both debug
and document what is communicated via the bus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
* cmd/tailscale/cli: Add service flag to serve command
This commit adds the service flag to serve command which allows serving a service and add the service
to the advertisedServices field in prefs (What advertise command does that will be removed later).
When adding proxies, TCP proxies and WEB proxies work the same way as normal serve, just under a
different DNSname. There is a services specific L3 serving mode called Tun, can be set via --tun flag.
Serving a service is always in --bg mode. If --bg is explicitly set t o false, an error message will
be sent out. The restriction on proxy target being localhost or 127.0.0.1 also applies to services.
When removing proxies, TCP proxies can be removed with type and port flag and off argument. Web proxies
can be removed with type, port, setPath flag and off argument. To align with normal serve, when setPath
is not set, all handler under the hostport will be removed. When flags are not set but off argument was
passed by user, it will be a noop. Removing all config for a service will be available later with a new
subcommand clear.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: fix ai comments and fix a test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Add a test for addServiceToPrefs
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: fix comment
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add dnsName in error message
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* change the cli input flag variable type
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace FindServiceConfig with map lookup
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* some code simplification and add asServiceName
This commit cotains code simplification for IsServingHTTPS, SetWebHandler, SetTCPForwarding
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace IsServiceName with tailcfg.AsServiceName
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace all assemble of host name for service with strings.Join
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: adjust parameter order and update output message
This commit updates the parameter order for IsTCPForwardingOnPort and SetWebHandler.
Also updated the message msgServiceIPNotAssigned to msgServiceWaitingApproval to adapt to
latest terminologies around services.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: flip bool condition
This commit fixes a previous bug added that throws error when serve funnel without service.
It should've been the opposite, which throws error when serve funnel with service.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: change parameter of IsTCPForwardingOnPort
This commit changes the dnsName string parameter for IsTCPForwardingOnPort to
svcName tailcfg.ServiceName. This change is made to reduce ambiguity when
a single service might have different dnsNames
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn/ipnlocal: replace the key to webHandler for services
This commit changes the way we get the webhandler for vipServices. It used to use the host name
from request to find the webHandler, now everything targeting the vipService IP have the same
set of handlers. This commit also stores service:port instead of FQDN:port as the key in serviceConfig
for Web map.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Updated use of service name.
This commit removes serviceName.IsEmpty and use direct comparison to instead. In legacy code, when an empty service
name needs to be passed, a new constant noService is passed. Removed redundant code for checking service name validity
and string method for serviceNameFlag.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Update bgBoolFlag
This commit update field name, set and string method of bgBoolFlag to make code cleaner.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: remove isDefaultService output from srvTypeAndPortFromFlags
This commit removes the isDefaultService out put as it's no longer needed. Also deleted redundant code.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: remove unnessesary variable declare in messageForPort
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace bool output for AsServiceName with err
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Replace DNSName with NoService if DNSname only used to identify service
This commit moves noService constant to tailcfg, updates AsServiceName to return tailcfg.NoService if the input
is not a valid service name. This commit also removes using the local DNSName as scvName parameter. When a function
is only using DNSName to identify if it's working with a service, the input in replaced with svcName and expect
caller to pass tailcfg.NoService if it's a local serve. This commit also replaces some use of Sprintf with
net.JoinHostPort for ipn.HostPort creation.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Remove the returned error for AsServiceName
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* apply suggested code and comment
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace local dnsName in test with tailcfg.NoService
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: move noService back and use else where
The constant serves the purpose of provide readability for passing as a function parameter. It's
more meaningful comparing to a . It can just be an empty string in other places.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn: Make WebHandlerExists and RemoveTCPForwarding accept svcName
This commit replaces two functions' string input with svcName input since they only use the dnsName to
identify service. Also did some minor cleanups
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
To write the init script.
And fix the JetKVM detection to work during early boot while the filesystem
and modules are still being loaded; it wasn't being detected on early boot
and then tailscaled was failing to start because it didn't know it was on JetKVM
and didn't modprobe tun.
Updates #16524
Change-Id: I0524ca3abd7ace68a69af96aab4175d32c07e116
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates the output for "tailscale ping" to indicate if a peer relay was traversed, just like the output for DERP or direct connections.
Fixestailscale/corp#30034
Signed-off-by: Dylan Bargatze <dylan@tailscale.com>
This commit modifies the k8s-operator and k8s-proxy to support passing down
the accept-routes configuration from the proxy class as a configuration value
read and used by the k8s-proxy when ran as a distinct container managed by
the operator.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit modifies the k8s proxy application configuration to include a
new field named `ServerURL` which, when set, modifies
the tailscale coordination server used by the proxy. This works in the same
way as the operator and the proxies it deploys.
If unset, the default coordination server is used.
Updates https://github.com/tailscale/tailscale/issues/13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit modifies the operator to detect the usage of k8s-apiserver
type proxy groups that wish to use the letsencrypt staging directory and
apply the appropriate environment variable to the statefulset it
produces.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
If the specified exit node string starts with "auto:" (i.e., can be parsed as an ipn.ExitNodeExpression),
we update ipn.Prefs.AutoExitNode instead of ipn.Prefs.ExitNodeID.
Fixes#16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The observed generation was set to always 0 in #16429, but this had the
knock-on effect of other controllers considering ProxyGroups never ready
because the observed generation is never up to date in
proxyGroupCondition. Make sure the ProxyGroupAvailable function does not
requires the observed generation to be up to date, and add testing
coverage to catch regressions.
Updates #16327
Change-Id: I42f50ad47dd81cc2d3c3ce2cd7b252160bb58e40
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Based on feedback that it wasn't clear what the user is meant to do with
the output of the last command, clarify that it's an optional command to
explore what got created.
Updates #13427
Change-Id: Iff64ec6d02dc04bf4bbebf415d7ed1a44e7dd658
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
When running `tailscale exit-node list`, an empty city or country name
should be displayed as a hyphen "-". However, this only happened when
there was no location at all. If a node provides a Hostinfo.Location,
then the list would display exactly what was provided.
This patch changes the listing so that empty cities and countries will
either render the provided name or "-".
Fixes#16500
Signed-off-by: Simon Law <sfllaw@tailscale.com>
In this PR, we start passing a LocalAPI actor to (*LocalBackend).Logout to make it subject
to the same access check as disconnects made via tailscale down or the GUI.
We then update the CLI to allow `tailscale logout` to accept a reason, similar to `tailscale down`.
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit modifies the k8s operator to allow for customisation of the ingress class name
via a new `OPERATOR_INGRESS_CLASS_NAME` environment variable. For backwards compatibility,
this defaults to `tailscale`.
When using helm, a new `ingress.name` value is provided that will set this environment variable
and modify the name of the deployed `IngressClass` resource.
Fixes https://github.com/tailscale/tailscale/issues/16248
Signed-off-by: David Bond <davidsbond93@gmail.com>
Refactors setting status into its own top-level function to make it
easier to ensure we _always_ set the status if it's changed on every
reconcile. Previously, it was possible to have stale status if some
earlier part of the provision logic failed.
Updates #16327
Change-Id: Idab0cfc15ae426cf6914a82f0d37a5cc7845236b
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the operator helm chart values to bring the newly
added `loginServer` field to the top level. We felt as though it was a bit
confusing to be at the `operatorConfig` level as this value modifies the
behaviour or the operator, api server & all resources that the operator
manages.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
With this change, policy enforcement and exit node resolution can happen in separate steps,
since enforcement no longer depends on resolving the suggested exit node. This keeps policy
enforcement synchronous (e.g., when switching profiles), while allowing exit node resolution
to be asynchronous on netmap updates, link changes, etc.
Additionally, the new preference will be used to let GUIs and CLIs switch back to "auto" mode
after a manual exit node override, which is necessary for tailscale/corp#29969.
Updates tailscale/corp#29969
Updates #16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit modifies the kubernetes operator to allow for customisation of the tailscale
login url. This provides some data locality for people that want to configure it.
This value is set in the `loginServer` helm value and is propagated down to all resources
managed by the operator. The only exception to this is recorder nodes, where additional
changes are required to support modifying the url.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
* cmd/k8s-operator: ProxyClass annotation for Services and Ingresses
Previously, the ProxyClass could only be configured for Services and
Ingresses via a Label. This adds the ability to set it via an
Annotation, but prioritizes the Label if both a Label and Annotation are
set.
Updates #14323
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* Update cmd/k8s-operator/operator.go
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: Tom Meadows <tom@tmlabs.co.uk>
* Update cmd/k8s-operator/operator.go
Signed-off-by: Tom Meadows <tom@tmlabs.co.uk>
* cmd/k8s-operator: ProxyClass annotation for Services and Ingresses
Previously, the ProxyClass could only be configured for Services and
Ingresses via a Label. This adds the ability to set it via an
Annotation, but prioritizes the Label if both a Label and Annotation are
set.
Updates #14323
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Signed-off-by: Tom Meadows <tom@tmlabs.co.uk>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
We dropped the idea of the Experimental release stage in
tailscale/tailscale-www#7697, in favour of Community Projects.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This method is only needed to migrate between store.FileStore and
tpm.tpmStore. We can make a runtime type assertion instead of
implementing an unused method for every platform.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, the operator checked the ProxyGroup status fields for
information on how many of the proxies had successfully authed. Use
their state Secrets instead as a more reliable source of truth.
containerboot has written device_fqdn and device_ips keys to the
state Secret since inception, and pod_uid since 1.78.0, so there's
no need to use the API for that data. Read it from the state Secret
for consistency. However, to ensure we don't read data from a
previous run of containerboot, make sure we reset containerboot's
state keys on startup.
One other knock-on effect of that is ProxyGroups can briefly be
marked not Ready while a Pod is restarting. Introduce a new
ProxyGroupAvailable condition to more accurately reflect
when downstream controllers can implement flows that rely on a
ProxyGroup having at least 1 proxy Pod running.
Fixes#16327
Change-Id: I026c18e9d23e87109a471a87b8e4fb6271716a66
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add a new `--encrypt-state` flag to `cmd/tailscaled`. Based on that
flag, migrate the existing state file to/from encrypted format if
needed.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit adds a NOTES.txt to the operator helm chart that will be written to the
terminal upon successful installation of the operator.
It includes a small list of knowledgebase articles with possible next steps for
the actor that installed the operator to the cluster. It also provides possible
commands to use for explaining the custom resources.
Fixes#13427
Signed-off-by: David Bond <davidsbond93@gmail.com>
It's one of the slower ones, so split it up into chunks.
Updates tailscale/corp#28679
Change-Id: I16a5ba667678bf238c84417a51dda61baefbecf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Proxies know how to reload configfile on changes since 1.80, which
is going to be the earliest supported proxy version with 1.84 operator,
so remove the mechanism that was updating configfile hash to force
proxy Pod restarts on config changes.
Updates #13032
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
If you had HTTPS_PROXY=https://some-valid-cert.example.com running a
CONNECT proxy, we should've been able to do a TLS CONNECT request to
e.g. controlplane.tailscale.com:443 through that, and I'm pretty sure
it used to work, but refactorings and lack of integration tests made
it regress.
It probably regressed when we added the baked-in LetsEncrypt root cert
validation fallback code, which was testing against the wrong hostname
(the ultimate one, not the one which we were being asked to validate)
Fixes#16222
Change-Id: If014e395f830e2f87f056f588edacad5c15e91bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Nick Khyl
KevinLiang10
David Bond
Tom Proctor
Claus Lensbøl
Jordan Whited
Tom Meadows
Simon Law
Andrew Lytvynov
Brad Fitzpatrick
Dylan Bargatze
Kristoffer Dalby
Irbe Krumina