This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If multiple upstream DNS servers are available, quad-100 sends requests to all of them
and forwards the first successful response, if any. If no successful responses are received,
it propagates the first failure from any of them.
This PR adds some test coverage for these scenarios.
Updates #13571
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We currently have two executions paths where (*forwarder).forwardWithDestChan
returns nil, rather than an error, without sending a DNS response to responseChan.
These paths are accompanied by a comment that reads:
// Returning an error will cause an internal retry, there is
// nothing we can do if parsing failed. Just drop the packet.
But it is not (or no longer longer) accurate: returning an error from forwardWithDestChan
does not currently cause a retry.
Moreover, although these paths are currently unreachable due to implementation details,
if (*forwarder).forwardWithDestChan were to return nil without sending a response to
responseChan, it would cause a deadlock at one call site and a panic at another.
Therefore, we update (*forwarder).forwardWithDestChan to return errors in those two paths
and remove comments that were no longer accurate and misleading.
Updates #cleanup
Updates #13571
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
If a DoH server returns an HTTP server error, rather than a SERVFAIL within
a successful HTTP response, we should handle it in the same way as SERVFAIL.
Updates #13571
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
As per the docstring, (*forwarder).forwardWithDestChan should either send to responseChan
and returns nil, or returns a non-nil error (without sending to the channel).
However, this does not hold when all upstream DNS servers replied with an error.
We've been handling this special error path in (*Resolver).Query but not in (*Resolver).HandlePeerDNSQuery.
As a result, SERVFAIL responses from upstream servers were being converted into HTTP 503 responses,
instead of being properly forwarded as SERVFAIL within a successful HTTP response, as per RFC 8484, section 4.2.1:
A successful HTTP response with a 2xx status code (see Section 6.3 of [RFC7231]) is used for any valid DNS response,
regardless of the DNS response code. For example, a successful 2xx HTTP status code is used even with a DNS message
whose DNS response code indicates failure, such as SERVFAIL or NXDOMAIN.
In this PR we fix (*forwarder).forwardWithDestChan to no longer return an error when it sends a response to responseChan,
and remove the special handling in (*Resolver).Query, as it is no longer necessary.
Updates #13571
Signed-off-by: Nick Hill <mykola.khyl@gmail.com>
Updates tailscale/tailscale#6148
This is the result of some observations we made today with @raggi. The DNS over HTTPS client currently doesn't cap the number of connections it uses, either in-use or idle. A burst of DNS queries will open multiple connections. Idle connections remain open for 30 seconds (this interval is defined in the dohTransportTimeout constant). For DoH providers like NextDNS which send keep-alives, this means the cellular modem will remain up more than expected to send ACKs if any keep-alives are received while a connection remains idle during those 30 seconds. We can set the IdleConnTimeout to 10 seconds to ensure an idle connection is terminated if no other DNS queries come in after 10 seconds. Additionally, we can cap the number of connections to 1. This ensures that at all times there is only one open DoH connection, either active or idle. If idle, it will be terminated within 10 seconds from the last query.
We also observed all the DoH providers we support are capable of TLS 1.3. We can force this TLS version to reduce the number of packets sent/received each time a TLS connection is established.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#13326
Adds a CLI subcommand to perform DNS queries using the internal DNS forwarder and observe its internals (namely, which upstream resolvers are being used).
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
mdnsResponder at least as of macOS Sequoia does not find NXDOMAIN
responses to these dns-sd PTR queries acceptable unless they include the
question section in the response. This was found debugging #13511, once
we turned on additional diagnostic reporting from mdnsResponder we
witnessed:
```
Received unacceptable 12-byte response from 100.100.100.100 over UDP via utun6/27 -- id: 0x7F41 (32577), flags: 0x8183 (R/Query, RD, RA, NXDomain), counts: 0/0/0/0,
```
If the response includes a question section, the resposnes are
acceptable, e.g.:
```
Received acceptable 59-byte response from 8.8.8.8 over UDP via en0/17 -- id: 0x2E55 (11861), flags: 0x8183 (R/Query, RD, RA, NXDomain), counts: 1/0/0/0,
```
This may be contributing to an issue under diagnosis in #13511 wherein
some combination of conditions results in mdnsResponder no longer
answering DNS queries correctly to applications on the system for
extended periods of time (multiple minutes), while dig against quad-100
provides correct responses for those same domains. If additional debug
logging is enabled in mdnsResponder we see it reporting:
```
Penalizing server 100.100.100.100 for 60 seconds
```
It is also possible that the reason that macOS & iOS never "stopped
spamming" these queries is that they have never been replied to with
acceptable responses. It is not clear if this special case handling of
dns-sd PTR queries was ever beneficial, and given this evidence may have
always been harmful. If we subsequently observe that the queries settle
down now that they have acceptable responses, we should remove these
special cases - making upstream queries very occasionally isn't a lot of
battery, so we should be better off having to maintain less special
cases and avoid bugs of this class.
Updates #2442
Updates #3025
Updates #3363
Updates #3594
Updates #13511
Signed-off-by: James Tucker <james@tailscale.com>
`DNS unavailable` was marked as a high severity warning. On Android (and other platforms), these trigger a system notification. Here we reduce the severity level to medium. A medium severity warning will still display the warning icon on platforms with a tray icon because of the `ImpactsConnectivity=true` flag being set here, but it won't show a notification anymore. If people enter an area with bad cellular reception, they're bound to receive so many of these notifications and we need to reduce notification fatigue.
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Troubleshooting DNS resolution issues often requires additional information.
This PR expands the effect of the TS_DEBUG_DNS_FORWARD_SEND envknob to forwarder.forwardWithDestChan,
and includes the request type, domain name length, and the first 3 bytes of the domain's SHA-256 hash in the output.
Fixes#13070
Signed-off-by: Nick Khyl <nickk@tailscale.com>
updates tailscale/corp#21823
Misconfigured, broken, or blocked DNS will often present as
"internet is broken'" to the end user. This plumbs the health tracker
into the dns manager and forwarder and adds a health warning
with a 5 second delay that is raised on failures in the forwarder and
lowered on successes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Updates tailscale/corp#20677
The recover function wasn't getting set in the benchmark
tests. Default changed to an empty func.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
And some misc doc tweaks for idiomatic Go style.
Updates #cleanup
Change-Id: I3ca45f78aaca037f433538b847fd6a9571a2d918
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#20677
Replaces the original attempt to rectify this (by injecting a netMon
event) which was both heavy handed, and missed cases where the
netMon event was "minor".
On apple platforms, the fetching the interface's nameservers can
and does return an empty list in certain situations. Apple's API
in particular is very limiting here. The header hints at notifications
for dns changes which would let us react ahead of time, but it's all
private APIs.
To avoid remaining in the state where we end up with no
nameservers but we absolutely need them, we'll react
to a lack of upstream nameservers by attempting to re-query
the OS.
We'll rate limit this to space out the attempts. It seems relatively
harmless to attempt a reconfig every 5 seconds (triggered
by an incoming query) if the network is in this broken state.
Missing nameservers might possibly be a persistent condition
(vs a transient error), but that would also imply that something
out of our control is badly misconfigured.
Tested by randomly returning [] for the nameservers. When switching
between Wifi networks, or cell->wifi, this will randomly trigger
the bug, and we appear to reliably heal the DNS state.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Fixestailscale/corp#20677
On macOS sleep/wake, we're encountering a condition where reconfigure the network
a little bit too quickly - before apple has set the nameservers for our interface.
This results in a persistent condition where we have no upstream resolver and
fail all forwarded DNS queries.
No upstream nameservers is a legitimate configuration, and we have no (good) way
of determining when Apple is ready - but if we need to forward a query, and we
have no nameservers, then something has gone badly wrong and the network is
very broken.
A simple fix here is to simply inject a netMon event, which will go through the
configuration dance again when we hit the SERVFAIL condition.
Tested by artificially/randomly returning [] for the list of nameservers in the bespoke
ipn-bridge code responsible for getting the nameservers.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
As quad-100 is an authoritative server for 4via6 domains, it should always return responses
with a response code of 0 (indicating no error) when resolving records for these domains.
If there's no resource record of the specified type (e.g. A), it should return a response
with an empty answer section rather than NXDomain. Such a response indicates that there
is at least one RR of a different type (e.g., AAAA), suggesting the Windows stub resolver
to look for it.
Fixestailscale/corp#20767
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Updates https://github.com/tailscale/corp/issues/15802.
On iOS exclusively, this PR adds logic to use a split DNS configuration in more cases, with the goal of improving battery life. Acting as the global DNS resolver on iOS should be avoided, as it leads to frequent wakes of IPNExtension.
We try to determine if we can have Tailscale only handle DNS queries for resources inside the tailnet, that is, all routes in the DNS configuration do not require a custom resolver (this is the case for app connectors, for instance).
If so, we set all Routes as MatchDomains. This enables a split DNS configuration which will help preserve battery life. Effectively, for the average Tailscale user who only relies on MagicDNS to resolve *.ts.net domains, this means that Tailscale DNS will only be used for those domains.
This PR doesn't affect users with Override Local DNS enabled. For these users, there should be no difference and Tailscale will continue acting as a global DNS resolver.
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Now that tsdial.Dialer.UserDial has been updated to honor the configured routes
and dial external network addresses without going through Tailscale, while also being
able to dial a node/subnet router on the tailnet, we can start using UserDial to forward
DNS requests. This is primarily needed for DNS over TCP when forwarding requests
to internal DNS servers, but we also update getKnownDoHClientForProvider to use it.
Updates tailscale/corp#18725
Signed-off-by: Nick Khyl <nickk@tailscale.com>
To aid in debugging exactly what's going wrong, instead of the
not-particularly-useful "dns udp query: context deadline exceeded" error
that we currently get.
Updates #3786
Updates #10768
Updates #11620
(etc.)
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76334bf0681a8a2c72c90700f636c4174931432c
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This ensures that we close the underlying connection(s) when a major
link change happens. If we don't do this, on mobile platforms switching
between WiFi and cellular can result in leftover connections in the
http.Client's connection pool which are bound to the "wrong" interface.
Updates #10821
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibd51ce2efcaf4bd68e14f6fdeded61d4e99f9a01
Updates #7946
[@bradfitz fixed up version of #8417]
Change-Id: I1dbf6fa8d525b25c0d7ad5c559a7f937c3cd142a
Signed-off-by: alexelisenko <39712468+alexelisenko@users.noreply.github.com>
Signed-off-by: Alex Paguis <alex@windscribe.com>
If a client socket is remotely lost but the client is not sent an RST in
response to the next request, the socket might sit in RTO for extended
lengths of time, resulting in "no internet" for users. Instead, timeout
after 10s, which will close the underlying socket, recovering from the
situation more promptly.
Updates #10967
Signed-off-by: James Tucker <james@tailscale.com>
To make it easier to correlate the starting/ending log messages.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2802d53ad98e19bc8914bc58f8c04d4443227b26
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
Advertise it on Android (it looks like it already works once advertised).
And both advertise & likely fix it on iOS. Yet untested.
Updates #9672
Change-Id: If3b7e97f011dea61e7e75aff23dcc178b6cf9123
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.
This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.
Updates tailscale/corp#14809
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
We weren't correctly retrying truncated requests to an upstream DNS
server with TCP. Instead, we'd return a truncated request to the user,
even if the user was querying us over TCP and thus able to handle a
large response.
Also, add an envknob and controlknob to allow users/us to disable this
behaviour if it turns out to be buggy (✨ DNS ✨).
Updates #9264
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ifb04b563839a9614c0ba03e9c564e8924c1a2bfd
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
So we're staying within the netip.Addr/AddrPort consistently and
avoiding allocs/conversions to the legacy net addr types.
Updates #5162
Change-Id: I59feba60d3de39f773e68292d759766bac98c917
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using log.Printf may end up being printed out to the console, which
is not desirable. I noticed this when I was investigating some client
logs with `sockstats: trace "NetcheckClient" was overwritten by another`.
That turns to be harmless/expected (the netcheck client will fall back
to the DERP client in some cases, which does its own sockstats trace).
However, the log output could be visible to users if running the
`tailscale netcheck` CLI command, which would be needlessly confusing.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
It was originally added to control memory use on iOS (#2490), but then
was relaxed conditionally when running on iOS 15 (#3098). Now that we
require iOS 15, there's no need for the limit at all, so simplify back
to the original state.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Add the envknob TS_DEBUG_EXIT_NODE_DNS_NET_PKG, which enables more
verbose debug logging when calling the handleExitNodeDNSQueryWithNetPkg
function. This function is currently only called on Windows and Android.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ieb3ca7b98837d7dc69cd9ca47609c1c52e3afd7b
David Anderson
Brad Fitzpatrick
Nahum Shalman
Andrew Dunham
Nick Khyl
Nick Hill
Andrea Gottardo
James Tucker
Jonathan Nobels
alexelisenko
Andrew Lytvynov
Andrew Dunham
Mihai Parparita
Maisem Ali
David Anderson