Both are populated from the current netmap's MagicDNSSuffix.
But building a full ipnstate.Status (with peers!) is expensive and unnecessary.
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We added this helper in 1e2e319e7d. Remove this copy.
Updates #cleanup
Change-Id: I5b0681acc23692beed35951c9902ac9ceca0a8b9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a feature/taildrop package, a ts_omit_taildrop build tag,
and starts moving code to feature/taildrop. In some cases, code
remains where it was but is now behind a build tag. Future changes
will move code to an extension and out of LocalBackend, etc.
Updates #12614
Change-Id: Idf96c61144d1a5f707039ceb2ff59c99f5c1642f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In preparation for adding more parameters (and later, moving some away), rework
the portmapper constructor to accept its arguments on a Config struct rather
than positionally.
This is a breaking change to the function signature, but one that is very easy
to update, and a search of GitHub reveals only six instances of usage outside
clones and forks of Tailscale itself, that are not direct copies of the code
fixed up here.
While we could stub in another constructor, I think it is safe to let those
folks do the update in-place, since their usage is already affected by other
changes we can't test for anyway.
Updates #15160
Change-Id: I9f8a5e12b38885074c98894b7376039261b43f43
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Although, at the moment, we do not yet require an event bus to be present, as
we start to add more pieces we will want to ensure it is always available. Add
a new constructor and replace existing uses of new(tsd.System) throughout.
Update generated files for import changes.
Updates #15160
Change-Id: Ie5460985571ade87b8eac8b416948c7f49f0f64b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
https://github.com/tailscale/tailscale/pull/15395 changed the logic to
skip `EditPrefs` when the platform doesn't support auto-updates. But the
old logic would only fail `EditPrefs` if the auto-update value was
`true`. If it was `false`, `EditPrefs` would succeed and store `false`
in prefs. The new logic will keep the value `unset` even if the tailnet
default is `false`.
Fixes#15691
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In this PR, we enable extensions to track changes in the current prefs. These changes can result from a profile switch
or from the user or system modifying the current profile’s prefs. Since some extensions may want to distinguish between
the two events, while others may treat them similarly, we rename the existing profile-change callback to become
a profile-state-change callback and invoke it whenever the current profile or its preferences change. Extensions can still
use the sameNode parameter to distinguish between situations where the profile information, including its preferences,
has been updated but still represents the same tailnet node, and situations where a switch to a different profile has been made.
Having dedicated prefs-change callbacks is being considered, but currently seems redundant. A single profile-state-change callback
is easier to maintain. We’ll revisit the idea of adding a separate callback as we progress on extracting existing features from LocalBackend,
but the conversion to a profile-state-change callback is intended to be permanent.
Finally, we let extensions retrieve the current prefs or profile state (profile info + prefs) at any time using the new
CurrentProfileState and CurrentPrefs methods. We also simplify the NewControlClientCallback signature to exclude
profile prefs. It’s optional, and extensions can retrieve the current prefs themselves if needed.
Updates #12614
Updates tailscale/corp#27645
Updates tailscale/corp#26435
Updates tailscale/corp#27502
Signed-off-by: Nick Khyl <nickk@tailscale.com>
[G,S]etWindowLongPtrW are not available on 32-bit Windows, where [G,S]etWindowLongW should be used instead.
The initial revision of #14945 imported the win package for calling and other Win32 API functions, which exported
the correct API depending on the platform. However, the same logic wasn't implemented when we removed
the win package dependency in a later revision, resulting in panics on Windows 10 x86 (there's no 32-bit Windows 11).
In this PR, we update the ipn/desktop package to use either [G,S]etWindowLongPtrW or [G,S]etWindowLongW
depending on the platform.
Fixes#15684
Signed-off-by: Nick Khyl <nickk@tailscale.com>
updates tailscale/tailscale#13476
On darwin, os.Hostname is no longer reliable when called
from a sandboxed process. To fix this, we will allow clients
to set an optional callback to query the hostname via an
alternative native API.
We will leave the default implementation as os.Hostname since
this works perfectly well for almost everything besides sandboxed
darwin clients.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
In this PR, we add two methods to facilitate extension lookup by both extensions,
and non-extensions (e.g., PeerAPI or LocalAPI handlers):
- FindExtensionByName returns an extension with the specified name.
It can then be type asserted to a given type.
- FindMatchingExtension is like errors.As, but for extensions.
It returns the first extension that matches the target type (either a specific extension
or an interface).
Updates tailscale/corp#27645
Updates tailscale/corp#27502
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we refactor the LocalBackend extension system, moving from direct callbacks to a more organized extension host model.
Specifically, we:
- Extract interface and callback types used by packages extending LocalBackend functionality into a new ipn/ipnext package.
- Define ipnext.Host as a new interface that bridges extensions with LocalBackend.
It enables extensions to register callbacks and interact with LocalBackend in a concurrency-safe, well-defined, and controlled way.
- Move existing callback registration and invocation code from ipnlocal.LocalBackend into a new type called ipnlocal.ExtensionHost,
implementing ipnext.Host.
- Improve docs for existing types and methods while adding docs for the new interfaces.
- Add test coverage for both the extracted and the new code.
- Remove ipn/desktop.SessionManager from tsd.System since ipn/desktop is now self-contained.
- Update existing extensions (e.g., ipn/auditlog and ipn/desktop) to use the new interfaces where appropriate.
We're not introducing new callback and hook types (e.g., for ipn.Prefs changes) just yet, nor are we enhancing current callbacks,
such as by improving conflict resolution when more than one extension tries to influence profile selection via a background profile resolver.
These further improvements will be submitted separately.
Updates #12614
Updates tailscale/corp#27645
Updates tailscale/corp#26435
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Ultimately, we'd like to get rid of the concept of the "current user". It is only used on Windows,
but even then it doesn't work well in multi-user and enterprise/managed Windows environments.
In this PR, we update LocalBackend and profileManager to decouple them a bit more from this obsolete concept.
This is done in a preparation for extracting ipnlocal.Extension-related interfaces and types, and using them
to implement optional features like tailscale/corp#27645, instead of continuing growing the core ipnlocal logic.
Notably, we rename (*profileManager).SetCurrentUserAndProfile() to SwitchToProfile() and change its signature
to accept an ipn.LoginProfileView instead of an ipn.ProfileID and ipn.WindowsUserID. Since we're not removing
the "current user" completely just yet, the method sets the current user to the owner of the target profile.
We also update the profileResolver callback type, which is typically implemented by LocalBackend extensions,
to return an ipn.LoginProfileView instead of ipn.ProfileID and ipn.WindowsUserID.
Updates tailscale/corp#27645
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The http.StatusMethodNotAllowed status code was being erroneously
set instead of http.StatusBadRequest in multiple places.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This flag is currently no-op and hidden. The flag does round trip
through the related pref. Subsequent commits will tie them to
net/udprelay.Server. There is no corresponding "tailscale up" flag,
enabling/disabling of the relay server will only be supported via
"tailscale set".
This is a string flag in order to support disablement via empty string
as a port value of 0 means "enable the server and listen on a random
unused port". Disablement via empty string also follows existing flag
convention, e.g. advertise-routes.
Early internal discussions settled on "tailscale set --relay="<port>",
but the author felt this was too ambiguous around client vs server, and
may cause confusion in the future if we add related flags.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
When we have an old cert that is being rotated, include it in the order.
If we're in the ARI-recommended rotation window, LE should exclude us
from rate limits. If we're not within that window, the order still
succeeds, so there's no risk in including the old cert.
Fixes#15542
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
initPeerAPIListener may be returning early unexpectedly. Add debug logging to
see what causes it to return early when it does.
Updates #14393
Signed-off-by: Percy Wegmann <percy@tailscale.com>
If we previously knew of macaddresses of a node, and they
suddenly goes to zero, ignore them and return the previous
hardware addresses.
Updates tailscale/corp#25168
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
In this PR, we update ipnlocal.LocalBackend to allow registering callbacks for control client creation
and profile changes. We also allow to register ipnauth.AuditLogFunc to be called when an auditable
action is attempted.
We then use all this to invert the dependency between the auditlog and ipnlocal packages and make
the auditlog functionality optional, where it only registers its callbacks via ipnlocal-provided hooks
when the auditlog package is imported.
We then underscore-import it when building tailscaled for Windows, and we'll explicitly
import it when building xcode/ipn-go-bridge for macOS. Since there's no default log-store
location for macOS, we'll also need to call auditlog.SetStoreFilePath to specify where
pending audit logs should be persisted.
Fixes#15394
Updates tailscale/corp#26435
Updates tailscale/corp#27012
Signed-off-by: Nick Khyl <nickk@tailscale.com>
LocalBackend transitions to ipn.NoState when switching to a different (or new) profile.
When this happens, we should unconfigure wgengine to clear routes, DNS configuration,
firewall rules that block all traffic except to the exit node, etc.
In this PR, we update (*LocalBackend).enterStateLockedOnEntry to do just that.
Fixes#15316
Updates tailscale/corp#23967
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The default values for `tailscale up` and `tailscale set` are supposed
to agree for all common flags. But they don’t for `--accept-routes`
on Windows and from the Mac OS App Store, because `tailscale up`
computes this value based on the operating system:
user@host:~$ tailscale up --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel (default true)
user@host:~$ tailscale set --help 2>&1 | grep -A1 accept-routes
--accept-dns, --accept-dns=false
accept DNS configuration from the admin panel
Luckily, `tailscale set` uses `ipn.MaskedPrefs`, so the default values
don’t logically matter. But someone will get the wrong idea if they
trust the `tailscale set --help` documentation.
In addition, `ipn.Prefs.RouteAll` defaults to true so it disagrees
with both of the flags above.
This patch makes `--accept-routes` use the same logic for in both
commands by hoisting the logic that was buried in `cmd/tailscale/cli`
to `ipn.Prefs.DefaultRouteAll`. Then, all three of defaults can agree.
Fixes: #15319
Signed-off-by: Simon Law <sfllaw@sfllaw.ca>
ipn/store/kubestore: skip cache for the write replica in cert share mode
This is to avoid issues where stale cache after Ingress recreation
causes the certs not to be re-issued.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
fixestailscale/tailscale#15394
In the current iteration, usage of the memstore for the audit
logger is expected on some platforms.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
On Windows and Android, peerAPIListeners may be initialized after a link change.
This commit adds log statements to make it easier to trace this flow.
Updates #14393
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Currently nobody calls SetTailscaleInterfaceName yet, so this is a
no-op. I checked oss, android, and the macOS/iOS client. Nobody calls
this, or ever did.
But I want to in the future.
Updates #15408
Updates #9040
Change-Id: I05dfabe505174f9067b929e91c6e0d8bc42628d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed logs on one of my machines where it can't auto-update with
scary log spam about "failed to apply tailnet-wide default for
auto-updates".
This avoids trying to do the EditPrefs if we know it's just going to
fail anyway.
Updates #282
Change-Id: Ib7db3b122185faa70efe08b60ebd05a6094eed8c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(*LocalBackend).setControlClientLocked() is called to both set and reset b.cc.
We shouldn't attempt to start the audit logger when b.cc is being reset (i.e., cc is nil).
However, it's fine to start the audit logger if b.cc implements auditlog.Transport, even if it's not a controlclient.Auto but a mock control client.
In this PR, we fix both issues and add an assertion that controlclient.Auto is an auditlog.Transport. This ensures a compile-time failure if controlclient.Auto ever stops being a valid transport due to future interface or implementation changes.
Updates tailscale/corp#26435
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Resetting LocalBackend's netmap without also unconfiguring wgengine to reset routes, DNS, and the killswitch
firewall rules may cause connectivity issues until a new netmap is received.
In some cases, such as when bootstrap DNS servers are inaccessible due to network restrictions or other reasons,
or if the control plane is experiencing issues, this can result in a complete loss of connectivity until the user disconnects
and reconnects to Tailscale.
As LocalBackend handles state resets in (*LocalBackend).resetForProfileChangeLockedOnEntry(), and this includes
resetting the netmap, resetting the current netmap in (*LocalBackend).Start() is not necessary.
Moreover, it's harmful if (*LocalBackend).Start() is called more than once for the same profile.
In this PR, we update resetForProfileChangeLockedOnEntry() to reset the packet filter and remove
the redundant resetting of the netmap and packet filter from Start(). We also update the state machine
tests and revise comments that became inaccurate due to previous test updates.
Updates tailscale/corp#27173
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If conffile is used to configure tailscaled, always update
currently advertised services from conffile, even if they
are empty in the conffile, to ensure that it is possible
to transition to a state where no services are advertised.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR adds some custom logic for reading and writing
kube store values that are TLS certs and keys:
1) when store is initialized, lookup additional
TLS Secrets for this node and if found, load TLS certs
from there
2) if the node runs in certs 'read only' mode and
TLS cert and key are not found in the in-memory store,
look those up in a Secret
3) if the node runs in certs 'read only' mode, run
a daily TLS certs reload to memory to get any
renewed certs
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* ipn/ipnlocal,envknob: add some primitives for HA replica cert share.
Add an envknob for configuring
an instance's cert store as read-only, so that it
does not attempt to issue or renew TLS credentials,
only reads them from its cert store.
This will be used by the Kubernetes Operator's HA Ingress
to enable multiple replicas serving the same HTTPS endpoint
to be able to share the same cert.
Also some minor refactor to allow adding more tests
for cert retrieval logic.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
updates tailscale/corp#26435
Adds client support for sending audit logs to control via /machine/audit-log.
Specifically implements audit logging for user initiated disconnections.
This will require further work to optimize the peristant storage and exclusion
via build tags for mobile:
tailscale/corp#27011tailscale/corp#27012
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
PR #14771 added support for getting certs from alternate ACME servers, but the
certStore caching mechanism breaks unless you install the CA in system roots,
because we check the validity of the cert before allowing a cache hit, which
includes checking for a valid chain back to a trusted CA. For ease of testing,
allow cert cache hits when the chain is unknown to avoid re-issuing the cert
on every TLS request served. We will still get a cache miss when the cert has
expired, as enforced by a test, and this makes it much easier to test against
non-prod ACME servers compared to having to manage the installation of non-prod
CAs on clients.
Updates #14771
Change-Id: I74fe6593fe399bd135cc822195155e99985ec08a
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
We're computing the list of services to hash by iterating over the
values of a map, the ordering of which is not guaranteed. This can cause
the hash to fluctuate depending on the ordering if there's more than one
service hosted by the same host.
Updates tailscale/corp#25733.
Signed-off-by: Naman Sood <mail@nsood.in>
Previously, it initialized when the backend was created. This caused two problems:
1. It would not properly switch when changing profiles.
2. If the backend was created before the profile had been selected, Taildrive's shares were uninitialized.
Updates #14825
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Reads use the sanitized form, so unsanitized keys being stored
in memory resulted lookup failures, for example for serve config.
Updates tailscale/tailscale#15134
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We previously were not merging in the TaildropTarget into the PeerStatus because we did not update AddPeer.
Updates tailscale/tailscale#14393
Signed-off-by: kari-ts <kari@tailscale.com>
Nick Khyl
Brad Fitzpatrick
David Anderson
M. J. Fromberger
Andrew Lytvynov
Jordan Whited
Jonathan Nobels
kari-ts
Percy Wegmann
Kristoffer Dalby
Simon Law
Irbe Krumina
James Sanderson
Tom Proctor
Naman Sood