cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This change builds on top of #14436 to ensure minimum downtime during egress ProxyGroup update rollouts:
- adds a readiness gate for ProxyGroup replicas that prevents kubelet from marking
the replica Pod as ready before a corresponding readiness condition has been added
to the Pod
- adds a reconciler that reconciles egress ProxyGroup Pods and, for each that is not ready,
if cluster traffic for relevant egress endpoints is routed via this Pod- if so add the
readiness condition to allow kubelet to mark the Pod as ready.
During the sequenced StatefulSet update rollouts kubelet does not restart
a Pod before the previous replica has been updated and marked as ready, so
ensuring that a replica is not marked as ready allows to avoid a temporary
post-update situation where all replicas have been restarted, but none of the
new ones are yet set up as an endpoint for the egress service, so cluster traffic is dropped.
Updates tailscale/tailscale#14326
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: allow reading OAuth creds from a CSI driver's volume and annotating operator's Service account
Updates #14264
Signed-off-by: Oliver Rahner <o.rahner@dke-data.com>
* cmd/k8s-operator,k8s-operator,go.mod: optionally create ServiceMonitor
Adds a new spec.metrics.serviceMonitor field to ProxyClass.
If that's set to true (and metrics are enabled), the operator
will create a Prometheus ServiceMonitor for each proxy to which
the ProxyClass applies.
Additionally, create a metrics Service for each proxy that has
metrics enabled.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
A small follow-up to #14112- ensures that the operator itself can emit
Events for its kube state store changes.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds functionality to kube client to emit Events.
Updates kube store to emit Events when tailscaled state has been loaded, updated or if any errors where
encountered during those operations.
This should help in cases where an error related to state loading/updating caused the Pod to crash in a loop-
unlike logs of the originally failed container instance, Events associated with the Pod will still be
accessible even after N restarts.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The default ProxyClass can be set via helm chart or env var, and applies
to all proxies that do not otherwise have an explicit ProxyClass set.
This ensures proxies created by the new ProxyGroup CRD are consistent
with the behaviour of existing proxies
Nearby but unrelated changes:
* Fix up double error logs (controller runtime logs returned errors)
* Fix a couple of variable names
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler that reconciles ExternalName Services that define a
tailnet target that should be exposed to cluster workloads on a ProxyGroup's
proxies.
The reconciler ensures that for each such service, the config mounted to
the proxies is updated with the tailnet target definition and that
and EndpointSlice and ClusterIP Service are created for the service.
Adds a new reconciler that ensures that as proxy Pods become ready to route
traffic to a tailnet target, the EndpointSlice for the target is updated
with the Pods' endpoints.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator/deploy: replace wildcards in Kubernetes Operator RBAC role definitions with verbs
fixes: #13168
Signed-off-by: Pierig Le Saux <pierig@n3xt.io>
cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable
Allow to configure images and image pull policies for individual proxies
via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image,
and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy
fields.
Document that we have images in ghcr.io on the relevant Helm chart fields.
Updates tailscale/tailscale#11675
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: Support image 'repo' or 'repository' keys in helm values
Fixes#12100
Signed-off-by: Michael Long <michaelongdev@gmail.com>
cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies.
This commit adds functionality to automatically populate
DNS records for the in-cluster ts.net nameserver
to allow cluster workloads to resolve MagicDNS names
associated with operator's proxies.
The records are created as follows:
* For tailscale Ingress proxies there will be
a record mapping the MagicDNS name of the Ingress
device and each proxy Pod's IP address.
* For cluster egress proxies, configured via
tailscale.com/tailnet-fqdn annotation, there will be
a record for each proxy Pod, mapping
the MagicDNS name of the exposed
tailnet workload to the proxy Pod's IP.
No records will be created for any other proxy types.
Records will only be created if users have configured
the operator to deploy an in-cluster ts.net nameserver
by applying tailscale.com/v1alpha1.DNSConfig.
It is user's responsibility to add the ts.net nameserver
as a stub nameserver for ts.net DNS names.
https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-corednshttps://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers
See also https://github.com/tailscale/tailscale/pull/11017
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values.
Fixes#11947
Signed-off-by: Gabe Gorelick <gabe@hightouch.io>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources
Adds a new reconciler that reconciles DNSConfig resources.
If a DNSConfig is deployed to cluster,
the reconciler creates kube nameserver resources.
This reconciler is only responsible for creating
nameserver resources and not for populating nameserver's records.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`.
Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>
* cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource.
ProxyClass custom resource can be used to specify customizations
for the proxy resources created by the operator.
Add a reconciler that validates ProxyClass resources
and sets a Ready condition to True or False with a corresponding reason and message.
This is required because some fields (labels and annotations)
require complex validations that cannot be performed at custom resource apply time.
Reconcilers that use the ProxyClass to configure proxy resources are expected to
verify that the ProxyClass is Ready and not proceed with resource creation
if configuration from a ProxyClass that is not yet Ready is required.
If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet.
If a tailscale Ingress has a tailscale.com/proxy-class annotation
and the referenced ProxyClass custom resource is available and Ready,
apply configuration from the ProxyClass to the proxy resources
that will be created for the Ingress.
Add a new .proxyClass field to the Connector spec.
If connector.spec.proxyClass is set to a ProxyClass that is available and Ready,
apply configuration from the ProxyClass to the proxy resources created for the Connector.
Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: add CRD to chart and static manifest
Add functionality to insert CRD to chart at package time.
Insert CRD to static manifests as this is where they are currently consumed from.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
API v1 is compatible with helm v2 and v2 is not.
However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020
and no-one should be using it anymore.
This PR also adds a CI lint test for helm chart
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Irbe Krumina
Oliver Rahner
James Stocker
Tom Proctor
Cameron Stokes
ChandonPierre
pierig-n3xtio
Lee Briggs
signed-long
Gabe Gorelick
Chris Milson-Tokunaga
ChandonPierre
Gabriel Martinez