It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Temporarily back out the TPM-based hw attestation code while we debug
Windows exceptions.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
There are several methods within the LocalBackend that used an unusual and
error-prone lock discipline whereby they require the caller to hold the backend
mutex on entry, but release it on the way out.
In #11650 we added some support code to make this pattern more visible.
Now it is time to eliminate the pattern (at least within this package).
This is intended to produce no semantic changes, though I am relying on
integration tests and careful inspection to achieve that.
To the extent possible I preserved the existing control flow. In a few places,
however, I replaced this with an unlock/lock closure. This means we will
sometimes reacquire a lock only to release it again one frame up the stack, but
these operations are not performance sensitive and the legibility gain seems
worthwhile.
We can probably also pull some of these out into separate methods, but I did
not do that here so as to avoid other variable scope changes that might be hard
to see. I would like to do some more cleanup separately.
As a follow-up, we could also remove the unlockOnce helper, but I did not do
that here either.
Updates #11649
Change-Id: I4c92d4536eca629cfcd6187528381c33f4d64e20
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
We update profileManager to allow registering a single state (profile+prefs) change hook.
This is to invert the dependency between the profileManager and the LocalBackend, so that
instead of LocalBackend asking profileManager for the state, we can have profileManager
call LocalBackend when the state changes.
We also update feature.Hook with a new (*feature.Hook).GetOk method to avoid calling both
IsSet and Get.
Updates tailscale/corp#28014
Updates #12614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This further minimizes the number of places where the profile manager updates the current profile and prefs.
We also document a scenario where an implicit profile switch can occur.
We should be able to address it after (partially?) inverting the dependency between
LocalBackend and profileManager, so that profileManager notifies LocalBackend
of profile changes instead of the other way around.
Updates tailscale/corp#28014
Updates #12614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we enable extensions to track changes in the current prefs. These changes can result from a profile switch
or from the user or system modifying the current profile’s prefs. Since some extensions may want to distinguish between
the two events, while others may treat them similarly, we rename the existing profile-change callback to become
a profile-state-change callback and invoke it whenever the current profile or its preferences change. Extensions can still
use the sameNode parameter to distinguish between situations where the profile information, including its preferences,
has been updated but still represents the same tailnet node, and situations where a switch to a different profile has been made.
Having dedicated prefs-change callbacks is being considered, but currently seems redundant. A single profile-state-change callback
is easier to maintain. We’ll revisit the idea of adding a separate callback as we progress on extracting existing features from LocalBackend,
but the conversion to a profile-state-change callback is intended to be permanent.
Finally, we let extensions retrieve the current prefs or profile state (profile info + prefs) at any time using the new
CurrentProfileState and CurrentPrefs methods. We also simplify the NewControlClientCallback signature to exclude
profile prefs. It’s optional, and extensions can retrieve the current prefs themselves if needed.
Updates #12614
Updates tailscale/corp#27645
Updates tailscale/corp#26435
Updates tailscale/corp#27502
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we refactor the LocalBackend extension system, moving from direct callbacks to a more organized extension host model.
Specifically, we:
- Extract interface and callback types used by packages extending LocalBackend functionality into a new ipn/ipnext package.
- Define ipnext.Host as a new interface that bridges extensions with LocalBackend.
It enables extensions to register callbacks and interact with LocalBackend in a concurrency-safe, well-defined, and controlled way.
- Move existing callback registration and invocation code from ipnlocal.LocalBackend into a new type called ipnlocal.ExtensionHost,
implementing ipnext.Host.
- Improve docs for existing types and methods while adding docs for the new interfaces.
- Add test coverage for both the extracted and the new code.
- Remove ipn/desktop.SessionManager from tsd.System since ipn/desktop is now self-contained.
- Update existing extensions (e.g., ipn/auditlog and ipn/desktop) to use the new interfaces where appropriate.
We're not introducing new callback and hook types (e.g., for ipn.Prefs changes) just yet, nor are we enhancing current callbacks,
such as by improving conflict resolution when more than one extension tries to influence profile selection via a background profile resolver.
These further improvements will be submitted separately.
Updates #12614
Updates tailscale/corp#27645
Updates tailscale/corp#26435
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Ultimately, we'd like to get rid of the concept of the "current user". It is only used on Windows,
but even then it doesn't work well in multi-user and enterprise/managed Windows environments.
In this PR, we update LocalBackend and profileManager to decouple them a bit more from this obsolete concept.
This is done in a preparation for extracting ipnlocal.Extension-related interfaces and types, and using them
to implement optional features like tailscale/corp#27645, instead of continuing growing the core ipnlocal logic.
Notably, we rename (*profileManager).SetCurrentUserAndProfile() to SwitchToProfile() and change its signature
to accept an ipn.LoginProfileView instead of an ipn.ProfileID and ipn.WindowsUserID. Since we're not removing
the "current user" completely just yet, the method sets the current user to the owner of the target profile.
We also update the profileResolver callback type, which is typically implemented by LocalBackend extensions,
to return an ipn.LoginProfileView instead of ipn.ProfileID and ipn.WindowsUserID.
Updates tailscale/corp#27645
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we further refactor LocalBackend and Unattended Mode to extract the logic that determines
which profile should be used at the time of the check, such as when a LocalAPI client connects or disconnects.
We then update (*LocalBackend).switchProfileLockedOnEntry to to switch to the profile returned by
(*LocalBackend).resolveBestProfileLocked() rather than to the caller-specified specified profile, and rename it
to switchToBestProfileLockedOnEntry.
This is done in preparation for updating (*LocalBackend).getBackgroundProfileIDLocked to support Always-On
mode by determining which profile to use based on which users, if any, are currently logged in and have an active
foreground desktop session.
Updates #14823
Updates tailscale/corp#26247
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, we disconnect Tailscale and reset LocalBackend on Windows when the last LocalAPI client
disconnects, unless Unattended Mode is enabled for the current profile. And the implementation
is somewhat racy since the current profile could theoretically change after
(*ipnserver.Server).addActiveHTTPRequest checks (*LocalBackend).InServerMode() and before it calls
(*LocalBackend).SetCurrentUser(nil) (or, previously, (*LocalBackend).ResetForClientDisconnect).
Additionally, we might want to keep Tailscale running and connected while a user is logged in
rather than tying it to whether a LocalAPI client is connected (i.e., while the GUI is running),
even when Unattended Mode is disabled for a profile. This includes scenarios where the new
AlwaysOn mode is enabled, as well as when Tailscale is used on headless Windows editions,
such as Windows Server Core, where the GUI is not supported. It may also be desirable to switch
to the "background" profile when a user logs off from their device or implement other similar
features.
To facilitate these improvements, we move the logic from ipnserver.Server to ipnlocal.LocalBackend,
where it determines whether to keep Tailscale running when the current user disconnects.
We also update the logic that determines whether a connection should be allowed to better reflect
the fact that, currently, LocalAPI connections are not allowed unless:
- the current UID is "", meaning that either we are not on a multi-user system or Tailscale is idle;
- the LocalAPI client belongs to the current user (their UIDs are the same);
- the LocalAPI client is Local System (special case; Local System is always allowed).
Whether Unattended Mode is enabled only affects the error message returned to the Local API client
when the connection is denied.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, profileManager filters profiles based on their creator/owner and the "current user"'s UID.
This causes DefaultUserProfileID(uid) to work incorrectly when the UID doesn't match the current user.
While we plan to remove the concept of the "current user" completely, we're not there yet.
In this PR, we fix DefaultUserProfileID by updating profileManager to allow checking profile access
for a given UID and modifying helper methods to accept UID as a parameter when returning
matching profiles.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Conventionally, we use views (e.g., ipn.PrefsView, tailcfg.NodeView, etc.) when
dealing with structs that shouldn't be mutated. However, ipn.LoginProfile has been
an exception so far, with a mix of passing and returning LoginProfile by reference
(allowing accidental mutations) and by value (which is wasteful, given its
current size of 192 bytes).
In this PR, we generate an ipn.LoginProfileView and use it instead of passing/returning
LoginProfiles by mutable reference or copying them when passing/returning by value.
Now, LoginProfiles can only be mutated by (*profileManager).setProfilePrefs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In preparation for multi-user and unattended mode improvements, we are
refactoring and cleaning up `ipn/ipnlocal.profileManager`. The concept of the
"current user", which is only relevant on Windows, is being deprecated and will
soon be removed to allow more than one Windows user to connect and utilize
`LocalBackend` according to that user's access rights to the device and specific
Tailscale profiles.
We plan to pass the user's identity down to the `profileManager`, where it can
be used to determine the user's access rights to a given `LoginProfile`. While
the new permission model in `ipnauth` requires more work and is currently
blocked pending PR reviews, we are updating the `profileManager` to reduce its
reliance on the concept of a single OS user being connected to the backend at
the same time.
We extract the switching to the default Tailscale profile, which may also
trigger legacy profile migration, from `profileManager.SetCurrentUserID`. This
introduces `profileManager.DefaultUserProfileID`, which returns the default
profile ID for the current user, and `profileManager.SwitchToDefaultProfile`,
which is essentially a shorthand for `pm.SwitchProfile(pm.DefaultUserProfileID())`.
Both methods will eventually be updated to accept the user's identity and
utilize that user's default profile.
We make access checks more explicit by introducing the `profileManager.checkProfileAccess`
method. The current implementation continues to use `profileManager.currentUserID`
and `LoginProfile.LocalUserID` to determine whether access to a given profile
should be granted. This will be updated to utilize the `ipnauth` package and the
new permissions model once it's ready. We also expand access checks to be used
more widely in the `profileManager`, not just when switching or listing
profiles. This includes access checks in methods like `SetPrefs` and, most notably,
`DeleteProfile` and `DeleteAllProfiles`, preventing unprivileged Windows users
from deleting Tailscale profiles owned by other users on the same device,
including profiles owned by local admins.
We extract `profileManager.ProfilePrefs` and `profileManager.SetProfilePrefs`
methods that can be used to get and set preferences of a given `LoginProfile` if
`profileManager.checkProfileAccess` permits access to it.
We also update `profileManager.setUnattendedModeAsConfigured` to always enable
unattended mode on Windows if `Prefs.ForceDaemon` is true in the current
`LoginProfile`, even if `profileManager.currentUserID` is `""`. This facilitates
enabling unattended mode via `tailscale up --unattended` even if
`tailscale-ipn.exe` is not running, such as when a Group Policy or MDM-deployed
script runs at boot time, or when Tailscale is used on a Server Code or otherwise
headless Windows environments. See #12239, #2137, #3186 and
https://github.com/tailscale/tailscale/pull/6255#issuecomment-2016623838 for
details.
Fixes#12239
Updates tailscale/corp#18342
Updates #3186
Updates #2137
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When auto-udpates are enabled, we don't need to nag users to update
after a new release, before we release auto-updates.
Updates https://github.com/tailscale/corp/issues/20081
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This way the default gets populated on first start, when no existing
state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty
fields, rather than layering `NewPrefs` values on top.
Updates https://github.com/tailscale/corp/issues/19623
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Setting the field after-the-fact wasn't working because we could migrate
prefs on creation, which would set health status for auto updates.
Updates #11986
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I41d79ebd61d64829a3a9e70586ce56f62d24ccfd
It's deprecated and using it gets us the old slow behavior
according to https://go.dev/blog/randv2.
> Having eliminated repeatability of the global output stream, Go 1.20
> was also able to make the global generator scale better in programs
> that don’t call rand.Seed, replacing the Go 1 generator with a very
> cheap per-thread wyrand generator already used inside the Go
> runtime. This removed the global mutex and made the top-level
> functions scale much better. Programs that do call rand.Seed fall
> back to the mutex-protected Go 1 generator.
Updates #7123
Change-Id: Ia5452e66bd16b5457d4b1c290a59294545e13291
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In prep for making health warnings rich objects with metadata rather
than a bunch of strings, start moving it all into the same place.
We'll still ultimately need the stringified form for the CLI and
LocalAPI for compatibility but we'll next convert all these warnings
into Warnables that have severity levels and such, and legacy
stringification will just be something each Warnable thing can do.
Updates #4136
Change-Id: I83e189435daae3664135ed53c98627c66e9e53da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to
1613b18f82 (diff-314ba0d799f70c8998940903efb541e511f352b39a9eeeae8d475c921d66c2ac),
nodes could set AutoUpdate.Apply=true on unsupported platforms via
`EditPrefs`. Specifically, this affects tailnets where default
auto-updates are on.
Fix up those invalid prefs on profile reload, as a migration.
Updates #11544
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
Previously, policies affected the default prefs for a new profile, but
that does not affect existing profiles. This change ensures that
policies are applied whenever preferences are loaded or changed, so a
CLI or GUI client that does not respect the policies will still be
overridden.
Exit node IP is dropped from this PR as it was implemented elsewhere
in #10172.
Fixestailscale/corp#15585
Change-Id: Ide4c3a4b00a64e43f506fa1fab70ef591407663f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled
clients can use this value to disambiguate fast user switching from one tailnet
to another that are under the same exact login. We will also try to backfill
this information during backend starts and profile switches so that users don't
have to re-authenticate their profile. The first client to use this new
information is the CLI in 'tailscale switch -list' which now uses text/tabwriter
to display the ID, Tailnet, and Account. Since account names are ambiguous, we
allow the user to pass 'tailscale switch ID' to specify the exact tailnet they
want to switch to.
Updates #9286
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
In addition to the new policy keys for the new options, some
already-in-use but missing policy keys are also being added to
util/syspolicy.
Updates ENG-2133
Change-Id: Iad08ca47f839ea6a65f81b76b4f9ef21183ebdc6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We would only look for duplicate profiles when a new login
occurred but when using `--force-reauth` we could switch
users which would end up with duplicate profiles.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Rather than make each ipn.StateStore implementation guard against
useless writes (a write of the same value that's already in the
store), do writes via a new wrapper that has a fast path for the
unchanged case.
This then fixes profileManager's flood of useless writes to AWS SSM,
etc.
Updates #8785
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fix does not seem ideal, but the test infrastructure using a local
goos doesn't seem to avoid all of the associated challenges, but is
somewhat deeply tied to the setup.
The core issue this addresses for now is that when run on Windows there
can be no code paths that attempt to use an invalid UID string, which on
Windows is described in [1].
For the goos="linux" tests, we now explicitly skip the affected
migration code if runtime.GOOS=="windows", and for the Windows test we
explicitly use the running users uid, rather than just the string
"user1". We also now make the case where a profile exists and has
already been migrated a non-error condition toward the outer API.
Updates #7876
[1] https://learn.microsoft.com/en-us/windows-server/identity/ad-ds/manage/understand-security-identifiers
Signed-off-by: James Tucker <jftucker@gmail.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The profileManager was using the LoginName as a proxy to figure out if the profile
had logged in, however the LoginName is not present if the node was created with an
Auth Key that does not have an associated user.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The iOS has a command to reset the persisted state of the app, but it
was doing its own direct keychain manipulation. This proved to be
brittle (since we changed how preferences are stored with #6022), so
we instead add a LocalAPI endpoint to do do this, which can be updated
in tandem.
This clears the same state as the iOS implementation (tailscale/corp#3186),
that is the machine key and preferences (which includes the node key).
Notably this does not clear the logtail ID, so that logs from the device
still end up in the same place.
Updates tailscale/corp#8923
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Brad Fitzpatrick
Andrew Lytvynov
Patrick O'Doherty
Claus Lensbøl
M. J. Fromberger
Jonathan Nobels
Nick Khyl
Maisem Ali
Andrew Dunham
Adrian Dewhurst
Marwan Sulaiman
Andrea Gottardo
Claire Wang
Sonia Appasamy
David Anderson
James Tucker
Aaron Klotz
Mihai Parparita
Will Norris