No need to make callers specify the redundant IP version or
TTL/HopLimit or EthernetType in the common case. The mkPacket helper
can set those when unset.
And use the mkIPLayer in another place, simplifying some code.
And rename mkPacketErr to just mkPacket, then move mkPacket to
test-only code, as mustPacket.
Updates #13038
Change-Id: Ic216e44dda760c69ab9bfc509370040874a47d30
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And clean up some of the test helpers in the process.
Updates #13038
Change-Id: I3e2b5f7028a32d97af7f91941e59399a8e222b25
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'd added this helper for tests, but then moved it to non-test code
and forgot some places to use it. This uses it in more places to
remove some boilerplate.
Updates #13038
Change-Id: Ic4dc339be1c47a55b71d806bab421097ee3d75ed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Logging serial numbers every time they are read might have been useful
early on, but seems unnecessary now.
Updates #5902
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The LocalBackend's state machine starts in NoState and soon transitions to NeedsLogin if there's no auto-start profile,
with the profileManager starting with a new empty profile. Notably, entering the NeedsLogin state blocks engine updates.
We expect the user to transition out of this state by logging in interactively, and we set WantRunning to true when
controlclient enters the StateAuthenticated state.
While our intention is correct, and completing an interactive login should set WantRunning to true, our assumption
that logging into the current Tailscale profile is the only way to transition out of the NeedsLogin state is not accurate.
Another common transition path includes an explicit profile switch (via LocalBackend.SwitchProfile) or an implicit switch
when a Windows user connects to the backend. This results in a bug where WantRunning is set to true even when it was
previously set to false, and the user expressed no intention of changing it.
A similar issue occurs when switching from (sic) a Tailnet that has seamlessRenewalEnabled, regardless of the current state
of the LocalBackend's state machine, and also results in unexpectedly set WantRunning. While this behavior is generally
undesired, it is also incorrect that it depends on the control knobs of the Tailnet we're switching from rather than
the Tailnet we're switching to. However, this issue needs to be addressed separately.
This PR updates LocalBackend.SetControlClientStatus to only set WantRunning to true in response to an interactive login
as indicated by a non-empty authURL.
Fixes#6668Fixes#11280
Updates #12756
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds tests for DNS requests, and ignoring IPv6 packets on v4-only
networks.
No behavior changes. But some things are pulled out into functions.
And the mkPacket helpers previously just for tests are moved into
non-test code to be used elsewhere to reduce duplication, doing the
checksum stuff automatically.
Updates #13038
Change-Id: I4dd0b73c75b2b9567b4be3f05a2792999d83f6a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the TS_DEBUG_NETSTACK_LOOPBACK_PORT environment variable is set,
netstack will loop back (dnat to addressFamilyLoopback:loopbackPort)
TCP & UDP flows originally destined to localServicesIP:loopbackPort.
localServicesIP is quad-100 or the IPv6 equivalent.
Updates tailscale/corp#22713
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In preparation for multi-user and unattended mode improvements, we are
refactoring and cleaning up `ipn/ipnlocal.profileManager`. The concept of the
"current user", which is only relevant on Windows, is being deprecated and will
soon be removed to allow more than one Windows user to connect and utilize
`LocalBackend` according to that user's access rights to the device and specific
Tailscale profiles.
We plan to pass the user's identity down to the `profileManager`, where it can
be used to determine the user's access rights to a given `LoginProfile`. While
the new permission model in `ipnauth` requires more work and is currently
blocked pending PR reviews, we are updating the `profileManager` to reduce its
reliance on the concept of a single OS user being connected to the backend at
the same time.
We extract the switching to the default Tailscale profile, which may also
trigger legacy profile migration, from `profileManager.SetCurrentUserID`. This
introduces `profileManager.DefaultUserProfileID`, which returns the default
profile ID for the current user, and `profileManager.SwitchToDefaultProfile`,
which is essentially a shorthand for `pm.SwitchProfile(pm.DefaultUserProfileID())`.
Both methods will eventually be updated to accept the user's identity and
utilize that user's default profile.
We make access checks more explicit by introducing the `profileManager.checkProfileAccess`
method. The current implementation continues to use `profileManager.currentUserID`
and `LoginProfile.LocalUserID` to determine whether access to a given profile
should be granted. This will be updated to utilize the `ipnauth` package and the
new permissions model once it's ready. We also expand access checks to be used
more widely in the `profileManager`, not just when switching or listing
profiles. This includes access checks in methods like `SetPrefs` and, most notably,
`DeleteProfile` and `DeleteAllProfiles`, preventing unprivileged Windows users
from deleting Tailscale profiles owned by other users on the same device,
including profiles owned by local admins.
We extract `profileManager.ProfilePrefs` and `profileManager.SetProfilePrefs`
methods that can be used to get and set preferences of a given `LoginProfile` if
`profileManager.checkProfileAccess` permits access to it.
We also update `profileManager.setUnattendedModeAsConfigured` to always enable
unattended mode on Windows if `Prefs.ForceDaemon` is true in the current
`LoginProfile`, even if `profileManager.currentUserID` is `""`. This facilitates
enabling unattended mode via `tailscale up --unattended` even if
`tailscale-ipn.exe` is not running, such as when a Group Policy or MDM-deployed
script runs at boot time, or when Tailscale is used on a Server Code or otherwise
headless Windows environments. See #12239, #2137, #3186 and
https://github.com/tailscale/tailscale/pull/6255#issuecomment-2016623838 for
details.
Fixes#12239
Updates tailscale/corp#18342
Updates #3186
Updates #2137
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for sending packets to 33:33:00:00:01 at IPv6
multicast address ff02::1 to send to all nodes.
Nothing in Tailscale depends on this (yet?), but it makes debugging in
VMs behind natlab easier (e.g. you can ping all nodes), and other
things might depend on this in the future.
Mostly I'm trying to flesh out the IPv6 support in natlab now that we
can write vnet tests.
Updates #13038
Change-Id: If590031fcf075690ca35c7b230a38c3e72e621eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently, we use PermitRead/PermitWrite/PermitCert permission flags to determine which operations are allowed for a LocalAPI client.
These checks are performed when localapi.Handler handles a request. Additionally, certain operations (e.g., changing the serve config)
requires the connected user to be a local admin. This approach is inherently racey and is subject to TOCTOU issues.
We consider it to be more critical on Windows environments, which are inherently multi-user, and therefore we prevent more than one
OS user from connecting and utilizing the LocalBackend at the same time. However, the same type of issues is also applicable to other
platforms when switching between profiles that have different OperatorUser values in ipn.Prefs.
We'd like to allow more than one Windows user to connect, but limit what they can see and do based on their access rights on the device
(e.g., an local admin or not) and to the currently active LoginProfile (e.g., owner/operator or not), while preventing TOCTOU issues on Windows
and other platforms. Therefore, we'd like to pass an actor from the LocalAPI to the LocalBackend to represent the user performing the operation.
The LocalBackend, or the profileManager down the line, will then check the actor's access rights to perform a given operation on the device
and against the current (and/or the target) profile.
This PR does not change the current permission model in any way, but it introduces the concept of an actor and includes some preparatory
work to pass it around. Temporarily, the ipnauth.Actor interface has methods like IsLocalSystem and IsLocalAdmin, which are only relevant
to the current permission model. It also lacks methods that will actually be used in the new model. We'll be adding these gradually in the next
PRs and removing the deprecated methods and the Permit* flags at the end of the transition.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
To test how virtual machines connect to the natlab vnet code.
Updates #13038
Change-Id: Ia4fd4b0c1803580ee7d94cc9878d777ad4f24f82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And refactor some of vnet.go for testability.
The only behavioral change (with a new test) is that ethernet
broadcasts no longer get sent back to the sender.
Updates #13038
Change-Id: Ic2e7e7d6d8805b7b7f2b5c52c2c5ba97101cef14
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This was previously disabled in 8e42510 due to missing GSO-awareness in
tstun, which was resolved in d097096.
Updates tailscale/corp#22511
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The bad naming (which had only been half updated with the IPv6
changes) tripped me up in the earlier change.
Updates #13038
Change-Id: I65ce07c167e8219d35b87e1f4bf61aab4cac31ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The reason they weren't working was because the cmd/tta agent in the
guest was dialing out to the test and the vnet couldn't map its global
unicast IPv6 address to a node as it was just using a
map[netip.Addr]*node and blindly trusting the *node was
populated. Instead, it was nil, so the agent connection fetching
didn't work for its RoundTripper and the test could never drive the
node. That map worked for IPv4 but for IPv6 we need to use the method
that takes into account the node's IPv6 SLAAC address. Most call sites
had been converted but I'd missed that one.
Also clean up some debug, and prohibit nodes' link-local unicast
addresses from dialing 2000::/3 directly for now. We can allow that to
be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's
called.) That mode was working on accident, but was confusing: Linux
would do source address selection from link local for the first few
seconds and then after SLAAC and DAD, switch to using the global
unicast source address. Be consistent for now and force it to use the
global unicast.
Updates #13038
Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Really we need to fix logpolicy + bootstrapDNS to not be so aggressive,
but this is a quick workaround meanwhile.
Without this, tailscaled starts immediately while IPv6 DAD is
happening for a couple seconds and logpolicy freaks out without the
network available and starts spamming stderr about bootstrap DNS
options. But we see that regularly anyway from people whose wifi is
down. So we need to fix the general case. This is not that fix.
Updates #13038
Change-Id: Iba7e536d08e59d34abded1d279f88fdc9c46d94d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There were a few places it could get wedged (notably the dial without
a timeout).
And add a knob for verbose debug logs.
And keep two idle connections always.
Updates #13038
Change-Id: I952ad182d7111481d97a83c12aa2ff4bfdc55fe8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move all the UDP handling to its own func to remove a bunch of "if
isUDP" checks in a bunch of blocks.
Updates #13038
Change-Id: If71d71b49e57651d15bd307a2233c43751cc8639
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't actually see this, but added this while debugging something
and figured it'd be good to keep.
Updates #13038
Change-Id: I67934c8a329e0233f79c3b08516fd6bad6bfe22a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On a major link change the LAN routes may change, so on linkChange where
ChangeDelta.Major, we need to call authReconfig to ensure that new
routes are observed and applied.
Updates tailscale/corp#22574
Signed-off-by: James Tucker <james@tailscale.com>
This is the equivalent of quad-100, but for IPv6. This is technically
already contained in the Tailscale IPv6 ULA prefix, but that is only
installed when remote peers are visible via control with contained
addrs. The service addr should always be reachable.
Updates #1152
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And sprinkle some more docs around.
Updates #13038
Change-Id: Ia2dcf567b68170481cc2094d64b085c6b94a778a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have several checked type assertions to *types.Named in both cmd/cloner and cmd/viewer.
As Go 1.23 updates the go/types package to produce Alias type nodes for type aliases,
these type assertions no longer work as expected unless the new behavior is disabled
with gotypesalias=0.
In this PR, we add codegen.NamedTypeOf(t types.Type), which functions like t.(*types.Named)
but also unrolls type aliases. We then use it in place of type assertions in the cmd/cloner and
cmd/viewer packages where appropriate.
We also update type switches to include *types.Alias alongside *types.Named in relevant cases,
remove *types.Struct cases when switching on types.Type.Underlying and update the tests
with more cases where type aliases can be used.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Go 1.23 updates the go/types package to produce Alias type nodes for type aliases, unless disabled with gotypesalias=0.
This new default behavior breaks codegen.LookupMethod, which uses checked type assertions to types.Named and
types.Interface, as only named types and interfaces have methods.
In this PR, we update codegen.LookupMethod to perform method lookup on the right-hand side of the alias declaration
and clearly switch on the supported type nodes types. We also improve support for various edge cases, such as when an alias
is used as a type parameter constraint, and add tests for the LookupMethod function.
Additionally, we update cmd/viewer/tests to include types with aliases used in type fields and generic type constraints.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
All the magic service names with virtual IPs will need IPv6 variants.
Pull this out in prep.
Updates #13038
Change-Id: I53b5eebd0679f9fa43dc0674805049258c83a0de
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we don't log about them when verbose logging is enabled.
Updates #13038
Change-Id: I925bc3a23e6c93d60dd4fb4bf6a4fdc5a326de95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The natlab Test Agent (tta) still had its old log streaming hack in
place where it dialed out to anything on TCP port 124 and those logs
were streamed to the host running the tests. But we'd since added gokrazy
syslog streaming support, which made that redundant.
So remove all the port 124 stuff. And then make sure we log to stderr
so gokrazy logs it to syslog.
Also, keep the first 1MB of logs in memory in tta too, exported via
localhost:8034/logs for interactive debugging. That was very useful
during debugging when I added IPv6 support. (which is coming in future
PRs)
Updates #13038
Change-Id: Ieed904a704410b9031d5fd5f014a73412348fa7f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Anton Tolchanov
Nick Khyl
Percy Wegmann
Jordan Whited
Andrea Gottardo
Kristoffer Dalby
Will Norris
James Tucker
Maisem Ali
Flakes Updater