Resetting LocalBackend's netmap without also unconfiguring wgengine to reset routes, DNS, and the killswitch
firewall rules may cause connectivity issues until a new netmap is received.
In some cases, such as when bootstrap DNS servers are inaccessible due to network restrictions or other reasons,
or if the control plane is experiencing issues, this can result in a complete loss of connectivity until the user disconnects
and reconnects to Tailscale.
As LocalBackend handles state resets in (*LocalBackend).resetForProfileChangeLockedOnEntry(), and this includes
resetting the netmap, resetting the current netmap in (*LocalBackend).Start() is not necessary.
Moreover, it's harmful if (*LocalBackend).Start() is called more than once for the same profile.
In this PR, we update resetForProfileChangeLockedOnEntry() to reset the packet filter and remove
the redundant resetting of the netmap and packet filter from Start(). We also update the state machine
tests and revise comments that became inaccurate due to previous test updates.
Updates tailscale/corp#27173
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If conffile is used to configure tailscaled, always update
currently advertised services from conffile, even if they
are empty in the conffile, to ensure that it is possible
to transition to a state where no services are advertised.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Hostinfo.WireIngress is used as a hint that the node intends to use
funnel. We now send another field, IngressEnabled, in cases where
funnel is explicitly enabled, and the logic control-side has
been changed to look at IngressEnabled as well as WireIngress in all
cases where previously the hint was used - so we can now stop sending
WireIngress when IngressEnabled is true to save some bandwidth.
Updates tailscale/tailscale#11572
Updates tailscale/corp#25931
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In this PR, we update client/tailscale.LocalClient to allow sending requests with an optional X-Tailscale-Reason
header. We then update ipn/ipnserver.{actor,Server} to retrieve this reason, if specified, and use it to determine
whether ipnauth.Disconnect is allowed when the AlwaysOn.OverrideWithReason policy setting is enabled.
For now, we log the reason, along with the profile and OS username, to the backend log.
Finally, we update LocalBackend to remember when a disconnect was permitted and do not reconnect automatically
unless the policy changes.
Updates tailscale/corp#26146
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Conventionally, we use views (e.g., ipn.PrefsView, tailcfg.NodeView, etc.) when
dealing with structs that shouldn't be mutated. However, ipn.LoginProfile has been
an exception so far, with a mix of passing and returning LoginProfile by reference
(allowing accidental mutations) and by value (which is wasteful, given its
current size of 192 bytes).
In this PR, we generate an ipn.LoginProfileView and use it instead of passing/returning
LoginProfiles by mutable reference or copying them when passing/returning by value.
Now, LoginProfiles can only be mutated by (*profileManager).setProfilePrefs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If we fail to parse the upstream DNS response in an app connector, we
might miss new IPs for the target domain. Log parsing errors to be able
to diagnose that.
Updates #14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* Reapply "ipn/ipnlocal: re-advertise appc routes on startup (#14609)"
This reverts commit 51adaec35a.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* ipn/ipnlocal: fix a deadlock in readvertiseAppConnectorRoutes
Don't hold LocalBackend.mu while calling the methods of
appc.AppConnector. Those methods could call back into LocalBackend and
try to acquire it's mutex.
Fixes https://github.com/tailscale/corp/issues/25965Fixes#14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
---------
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than using a string everywhere and needing to clarify that the
string should have the svc: prefix, create a separate type for Service
names.
Updates tailscale/corp#24607
Change-Id: I720e022f61a7221644bb60955b72cacf42f59960
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This commit intend to provide support for TCP and Web VIP services and also allow user to use Tun
for VIP services if they want to.
The commit includes:
1.Setting TCP intercept function for VIP Services.
2.Update netstack to send packet written from WG to netStack handler for VIP service.
3.Return correct TCP hander for VIP services when netstack acceptTCP.
This commit also includes unit tests for if the local backend setServeConfig would set correct TCP intercept
function and test if a hander gets returned when getting TCPHandlerForDst. The shouldProcessInbound
check is not unit tested since the test result just depends on mocked functions. There should be an integration
test to cover shouldProcessInbound and if the returned TCP handler actually does what the serveConfig says.
Updates tailscale/corp#24604
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Adds a new Hostinfo.IngressEnabled bool field that holds whether
funnel is currently enabled for the node. Triggers control update
when this value changes.
Bumps capver so that control can distinguish the new field being false
vs non-existant in previous clients.
This is part of a fix for an issue where nodes with any AllowFunnel
block set in their serve config are being displayed as if actively
routing funnel traffic in the admin panel.
Updates tailscale/tailscale#11572
Updates tailscale/corp#25931
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
There's at least one example of stored routes and advertised routes
getting out of sync. I don't know how they got there yet, but this would
backfill missing advertised routes on startup from stored routes.
Also add logging in LocalBackend.AdvertiseRoute to record when new
routes actually get put into prefs.
Updates #14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This deprecates the old "DERP string" packing a DERP region ID into an
IP:port of 127.3.3.40:$REGION_ID and just uses an integer, like
PeerChange.DERPRegion does.
We still support servers sending the old form; they're converted to
the new form internally right when they're read off the network.
Updates #14636
Change-Id: I9427ec071f02a2c6d75ccb0fcbf0ecff9f19f26f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit updates the VIPService c2n endpoint on client to response with actual VIPService configuration stored
in the serve config.
Fixestailscale/corp#24510
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
In the process, because I needed it for testing, make all
LocalBackend-managed goroutines be accounted for. And then in tests,
verify they're no longer running during LocalBackend.Shutdown.
Updates tailscale/corp#19681
Change-Id: Iad873d4df7d30103a4a7863dfacf9e078c77e6a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we update ipnlocal.NewLocalBackend to subscribe to policy change notifications
and reapply syspolicy settings to the current profile's ipn.Prefs whenever a change occurs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This moves code that handles ExitNodeID/ExitNodeIP syspolicy settings
from (*LocalBackend).setExitNodeID to applySysPolicy.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We have several places where LocalBackend instances are created for testing, but they are rarely shut down
when the tests that created them exit.
In this PR, we update newTestLocalBackend and similar functions to use testing.TB.Cleanup(lb.Shutdown)
to ensure LocalBackend instances are properly shut down during test cleanup.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
* ipn,tailcfg: add VIPService struct and c2n to fetch them from client
Updates tailscale/corp#22743, tailscale/corp#22955
Signed-off-by: Naman Sood <mail@nsood.in>
* more review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* don't mention PeerCapabilityServicesDestination since it's currently unused
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
This gets close to all of the remaining ones.
Updates #12912
Change-Id: I9c672bbed2654a6c5cab31e0cbece6c107d8c6fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were only updating the ProfileManager and not going down
the EditPrefs path which meant the prefs weren't applied
till either the process restarted or some other pref changed.
This makes it so that we reconfigure everything correctly when
ReloadConfig is called.
Updates #13032
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In this PR, we update the syspolicy package to utilize syspolicy/rsop under the hood,
and remove syspolicy.CachingHandler, syspolicy.windowsHandler and related code
which is no longer used.
We mark the syspolicy.Handler interface and RegisterHandler/SetHandlerForTest functions
as deprecated, but keep them temporarily until they are no longer used in other repos.
We also update the package to register setting definitions for all existing policy settings
and to register the Registry-based, Windows-specific policy stores when running on Windows.
Finally, we update existing internal and external tests to use the new API and add a few more
tests and benchmarks.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We add the ClientID() method to the ipnauth.Actor interface and updated ipnserver.actor to implement it.
This method returns a unique ID of the connected client if the actor represents one. It helps link a series
of interactions initiated by the client, such as when a notification needs to be sent back to a specific session,
rather than all active sessions, in response to a certain request.
We also add LocalBackend.WatchNotificationsAs and LocalBackend.StartLoginInteractiveAs methods,
which are like WatchNotifications and StartLoginInteractive but accept an additional parameter
specifying an ipnauth.Actor who initiates the operation. We store these actor identities in
watchSession.owner and LocalBackend.authActor, respectively,and implement LocalBackend.sendTo
and related helper methods to enable sending notifications to watchSessions associated with actors
(or, more broadly, identifiable recipients).
We then use the above to change who receives the BrowseToURL notifications:
- For user-initiated, interactive logins, the notification is delivered only to the user who initiated the
process. If the initiating actor represents a specific connected client, the URL notification is sent back
to the same LocalAPI client that called StartLoginInteractive. Otherwise, the notification is sent to all
clients connected as that user.
Currently, we only differentiate between users on Windows, as it is inherently a multi-user OS.
- In all other cases (e.g., node key expiration), we send the notification to all connected users.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
this commit changes usermetrics to be non-global, this is a building
block for correct metrics if a go process runs multiple tsnets or
in tests.
Updates #13420
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This mimics having Tailscale in the 'Stopped' state by programming an
empty DNS configuration when the current node key is expired.
Updates tailscale/support-escalations#55
Change-Id: I68ff4665761fb621ed57ebf879263c2f4b911610
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
In preparation for multi-user and unattended mode improvements, we are
refactoring and cleaning up `ipn/ipnlocal.profileManager`. The concept of the
"current user", which is only relevant on Windows, is being deprecated and will
soon be removed to allow more than one Windows user to connect and utilize
`LocalBackend` according to that user's access rights to the device and specific
Tailscale profiles.
We plan to pass the user's identity down to the `profileManager`, where it can
be used to determine the user's access rights to a given `LoginProfile`. While
the new permission model in `ipnauth` requires more work and is currently
blocked pending PR reviews, we are updating the `profileManager` to reduce its
reliance on the concept of a single OS user being connected to the backend at
the same time.
We extract the switching to the default Tailscale profile, which may also
trigger legacy profile migration, from `profileManager.SetCurrentUserID`. This
introduces `profileManager.DefaultUserProfileID`, which returns the default
profile ID for the current user, and `profileManager.SwitchToDefaultProfile`,
which is essentially a shorthand for `pm.SwitchProfile(pm.DefaultUserProfileID())`.
Both methods will eventually be updated to accept the user's identity and
utilize that user's default profile.
We make access checks more explicit by introducing the `profileManager.checkProfileAccess`
method. The current implementation continues to use `profileManager.currentUserID`
and `LoginProfile.LocalUserID` to determine whether access to a given profile
should be granted. This will be updated to utilize the `ipnauth` package and the
new permissions model once it's ready. We also expand access checks to be used
more widely in the `profileManager`, not just when switching or listing
profiles. This includes access checks in methods like `SetPrefs` and, most notably,
`DeleteProfile` and `DeleteAllProfiles`, preventing unprivileged Windows users
from deleting Tailscale profiles owned by other users on the same device,
including profiles owned by local admins.
We extract `profileManager.ProfilePrefs` and `profileManager.SetProfilePrefs`
methods that can be used to get and set preferences of a given `LoginProfile` if
`profileManager.checkProfileAccess` permits access to it.
We also update `profileManager.setUnattendedModeAsConfigured` to always enable
unattended mode on Windows if `Prefs.ForceDaemon` is true in the current
`LoginProfile`, even if `profileManager.currentUserID` is `""`. This facilitates
enabling unattended mode via `tailscale up --unattended` even if
`tailscale-ipn.exe` is not running, such as when a Group Policy or MDM-deployed
script runs at boot time, or when Tailscale is used on a Server Code or otherwise
headless Windows environments. See #12239, #2137, #3186 and
https://github.com/tailscale/tailscale/pull/6255#issuecomment-2016623838 for
details.
Fixes#12239
Updates tailscale/corp#18342
Updates #3186
Updates #2137
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
The last suggested exit node needs to be incorporated in the decision
making process when a new suggestion is requested, but currently it is
not quite right: it'll be used if the suggestion code has an error or a
netmap is unavailable, but it won't be used otherwise.
Instead, this makes the last suggestion into a tiebreaker when making a
random selection between equally-good options. If the last suggestion
does not make it to the final selection pool, then a different
suggestion will be made.
Since LocalBackend.SuggestExitNode is back to being a thin shim that
sets up the parameters to suggestExitNode, it no longer needs a test.
Its test was unable to be comprehensive anyway as the code being tested
contains an uncontrolled random number generator.
Updates tailscale/corp#19681
Change-Id: I94ecc9a0d1b622de3df4ef90523f1d3e67b4bfba
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We assume most containers are immutable and don't expect tailscale
running in them to auto-update. But there's no reason to prohibit it
outright.
Ignore the tailnet-wide default auto-update setting in containers, but
allow local users to turn on auto-updates via the CLI.
RELNOTE=Auto-updates are allowed in containers, but ignore the tailnet-wide default.
Fixes#12292
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than building a new suggested exit node set every time, compute
it once on first use. Currently, syspolicy ensures that values do not
change without a restart anyway.
Since the set is being constructed in a separate func now, the test code
that manipulates syspolicy can live there, and the TestSuggestExitNode
can now run in parallel with other tests because it does not have global
dependencies.
Updates tailscale/corp#19681
Change-Id: Ic4bb40ccc91b671f9e542bd5ba9c96f942081515
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
In order to test the sticky last suggestion code, a test was written for
LocalBackend.SuggestExitNode but it contains a random number generator
which makes writing comprehensive tests very difficult. This doesn't
change how the last suggestion works, but it adds some infrastructure to
make that easier in a later PR.
This adds func parameters for the two randomized parts: breaking ties
between DERP regions and breaking ties between nodes. This way tests can
validate the entire list of tied options, rather than expecting a
particular outcome given a particular random seed.
As a result of this, the global random number generator can be used
rather than seeding a local one each time.
In order to see the tied nodes for the location based (i.e. Mullvad)
case, pickWeighted needed to return a slice instead of a single
arbitrary option, so there is a small change in how that works.
Updates tailscale/corp#19681
Change-Id: I83c48a752abdec0f59c58ccfd8bfb3f3f17d0ea8
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This mostly removes a lot of repetition by predefining some nodes and
other data structures, plus adds some helpers for creating Peer entries
in the netmap. Several existing test cases were reworked to ensure
better coverage of edge cases, and several new test cases were added to
handle some additional responsibility that is in (or will be shortly
moving in) suggestExitNode().
Updates tailscale/corp#19681
Change-Id: Ie14c2988d7fd482f7d6a877f78525f7788669b85
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Setting the field after-the-fact wasn't working because we could migrate
prefs on creation, which would set health status for auto updates.
Updates #11986
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I41d79ebd61d64829a3a9e70586ce56f62d24ccfd
When an app connector is reconfigured and domains to route are removed,
we would like to no longer advertise routes that were discovered for
those domains. In order to do this we plan to store which routes were
discovered for which domains.
Add a controlknob so that we can enable/disable the new behavior.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
Lays the groundwork for the ability to persist app connectors discovered
routes, which will allow us to stop advertising routes for a domain if
the app connector no longer monitors that domain.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#19459
This PR adds the ability for users of the syspolicy handler to read string arrays from the MDM solution configured on the system.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Containers are typically immutable and should be updated as a whole (and
not individual packages within). Deny enablement of auto-updates in
containers.
Also, add the missing check in EditPrefs in LocalAPI, to catch cases
like tailnet default auto-updates getting enabled for nodes that don't
support it.
Updates #11544
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Nick Khyl
Irbe Krumina
James Sanderson
Brad Fitzpatrick
Andrew Lytvynov
Adrian Dewhurst
KevinLiang10
Naman Sood
Maisem Ali
Kristoffer Dalby
Andrew Dunham
Claire Wang
Fran Bull
Andrea Gottardo