Add ExtraRootCAs *x509.CertPool to tsd.System and plumb it through
the control client, noise transport, DERP, and wgengine layers so
that platforms like Android can inject user-installed CA certificates
into Go's TLS verification.
tlsdial.Config now honors base.RootCAs as additional trusted roots,
tried after system roots and before the baked-in LetsEncrypt fallback.
SetConfigExpectedCert gets the same treatment for domain-fronted DERP.
The Android client will set sys.ExtraRootCAs with a pool built from
x509.SystemCertPool + user-installed certs obtained via the Android
KeyStore API, replacing the current SSL_CERT_DIR environment variable
approach.
Updates #8085
Change-Id: Iecce0fd140cd5aa0331b124e55a7045e24d8e0c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new tailcfg.NodeCapability (NodeAttrCacheNetworkMaps) to control whether
a node with support for caching network maps will attempt to do so. Update the
capability version to reflect this change (mainly as a safety measure, as the
control plane does not currently need to know about it).
Use the presence (or absence) of the node attribute to decide whether to create
and update a netmap cache for each profile. If caching is disabled, discard the
cached data; this allows us to use the presence of a cached netmap as an
indicator it should be used (unless explicitly overridden). Add a test that
verifies the attribute is respected. Reverse the sense of the environment knob
to be true by default, with an override to disable caching at the client
regardless what the node attribute says.
Move the creation/update of the netmap cache (when enabled) until after
successfully applying the network map, to reduce the possibility that we will
cache (and thus reuse after a restart) a network map that fails to correctly
configure the client.
Updates #12639
Change-Id: I1df4dd791fdb485c6472a9f741037db6ed20c47e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Instead of sending out disco keys via TSMP once, send them out in
intervals of 60+ seconds. The trigger is still callmemaaybe and the keys
will not be send if no direct connection needs to be established.
This fixes a case where a node can have stale keys but have communicated
with the other peer before, leading to an infinite DERP state.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Without this, any test relying on underlying use of magicsock will fail
without network connectivity, even when the test logic has no need for a
network connection. Tests currently in this bucket include many in
tstest/integration and in tsnet.
Further explanation:
ipn only becomes Running when it sees at least one live peer or DERP
connection:
0cc1b2ff76/ipn/ipnlocal/local.go (L5861-L5866)
When tests only use a single node, they will never see a peer, so the
node has to wait to see a DERP server.
magicsock sets the preferred DERP server in updateNetInfo(), but this
function returns early if the network is down.
0cc1b2ff76/wgengine/magicsock/magicsock.go (L1053-L1106)
Because we're checking the real network, this prevents ipn from entering
"Running" and causes the test to fail or hang.
In tests, we can assume the network is up unless we're explicitly testing
the behaviour of tailscaled when the network is down. We do something similar
in magicsock/derp.go, where we assume we're connected to control unless
explicitly testing otherwise:
7d2101f352/wgengine/magicsock/derp.go (L166-L177)
This is the template for the changes to `networkDown()`.
Fixes#17122
Co-authored-by: Alex Chan <alexc@tailscale.com>
Signed-off-by: Harry Harpham <harry@tailscale.com>
When a client starts up without being able to connect to control, it
sends its discoKey to other nodes it wants to communicate with over
TSMP. This disco key will be a newer key than the one control knows
about.
If the client that can connect to control gets a full netmap, ensure
that the disco key for the node not connected to control is not
overwritten with the stale key control knows about.
This is implemented through keeping track of mapSession and use that for
the discokey injection if it is available. This ensures that we are not
constantly resetting the wireguard connection when getting the wrong
keys from control.
This is implemented as:
- If the key is received via TSMP:
- Set lastSeen for the peer to now()
- Set online for the peer to false
- When processing new keys, only accept keys where either:
- Peer is online
- lastSeen is newer than existing last seen
If mapSession is not available, as in we are not yet connected to
control, punt down the disco key injection to magicsock.
Ideally, we will want to have mapSession be long lived at some point in
the near future so we only need to inject keys in one location and then
also use that for testing and loading the cache, but that is a yak for
another PR.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Add two small APIs to support out-of-tree projects to exchange custom
signaling messages over DERP without requiring disco protocol
extensions:
- OnDERPRecv callback on magicsock.Options / wgengine.Config: called for
every non-disco DERP packet before the peer map lookup, allowing callers
to intercept packets from unknown peers that would otherwise be dropped.
- SendDERPPacketTo method on magicsock.Conn: sends arbitrary bytes to a
node key via a DERP region, creating the connection if needed. Thin
wrapper around the existing internal sendAddr.
Also allow netstack.Start to accept a nil LocalBackend for use cases
that wire up TCP/UDP handlers directly without a full LocalBackend.
Updates tailscale/corp#24454
Change-Id: I99a523ef281625b8c0024a963f5f5bf5d8792c17
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To be less spammy in stable, add a nob that disables the creation and
processing of TSMPDiscoKeyAdvertisements until we have a proper rollout
mechanism.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
The "public key moved" panic has caused confusion on multiple occasions,
and is a known issue for Mullvad. Add a loose heuristic to detect
Mullvad nodes, and trigger distinct panics for Mullvad and non-Mullvad
instances, with a link to the associated bug.
When this occurs again with Mullvad, it'll be easier for somebody to
find the existing bug.
If it occurs again with something other than Mullvad, it'll be more
obvious that it's a distinct issue.
Updates tailscale/corp#27300
Change-Id: Ie47271f45f2ff28f767578fcca5e6b21731d08a1
Signed-off-by: Alex Chan <alexc@tailscale.com>
Restore synchronous method calls from LocalBackend to magicsock.Conn
for node views, filter, and delta mutations. The eventbus delivery
introduced in 8e6f63cf1 was invalid for these updates because
subsequent operations in the same call chain depend on magicsock
already having the current state. The Synchronize/settleEventBus
workaround was fragile and kept requiring more workarounds and
introducing new mystery bugs.
Since eventbus was added, we've since learned more about when to use
eventbus, and this wasn't one of the cases.
We can take another swing at using eventbus for netmap changes in a
future change.
Fixes#16369
Updates #18575 (likely fixes)
Change-Id: I79057cc9259993368bb1e350ff0e073adf6b9a8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
When we have not yet communicated with a peer, send a
TSMPDiscoAdvertisement to let the peer know of our disco key. This is in
most cases redundant, but will allow us to set up direct connections
when the client cannot access control.
Some parts taken from: #18073
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Moves magicksock.cloudInfo into util/cloudinfo with minimal changes.
Updates #17796
Change-Id: I83f32473b9180074d5cdbf00fa31e5b3f579f189
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
When receiving a TSMPDiscoAdvertisement from peer, update the discokey
for said peer.
Some parts taken from: https://github.com/tailscale/tailscale/pull/18073/
Updates #12639
Co-authored-by: James Tucker <james@tailscale.com>
Adds the ability to rotate discovery keys on running clients, needed for
testing upcoming disco key distribution changes.
Introduces key.DiscoKey, an atomic container for a disco private key,
public key, and the public key's ShortString, replacing the prior
separate atomic fields.
magicsock.Conn has a new RotateDiscoKey method, and access to this is
provided via localapi and a CLI debug command.
Note that this implementation is primarily for testing as it stands, and
regular use should likely introduce an additional mechanism that allows
the old key to be used for some time, to provide a seamless key rotation
rather than one that invalidates all sessions.
Updates tailscale/corp#34037
Signed-off-by: James Tucker <james@tailscale.com>
I noticed a deadlock in a test in a in-development PR where during a
shutdown storm of things (from a tsnet.Server.Close), LocalBackend was
trying to call magicsock.Conn.Synchronize but the magicsock and/or
eventbus was already shut down and no longer processing events.
Updates #16369
Change-Id: I58b1f86c8959303c3fb46e2e3b7f38f6385036f1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Merge the connstats package into the netlog package
and unexport all of its declarations.
Remove the buildfeatures.HasConnStats and use HasNetLog instead.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The connstats package was an unnecessary layer of indirection.
It was seperated out of wgengine/netlog so that net/tstun and
wgengine/magicsock wouldn't need a depenedency on the concrete
implementation of network flow logging.
Instead, we simply register a callback for counting connections.
This PR does the bare minimum work to prepare tstun and magicsock
to only care about that callback.
A future PR will delete connstats and merge it into netlog.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Also pull out interface method only needed in Linux.
Instead of having userspace do the call into the router, just let the
router pick up the change itself.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Saves ~53 KB from the min build.
Updates #12614
Change-Id: I73f9544a9feea06027c6ebdd222d712ada851299
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Due to iOS memory limitations in 2020 (see
https://tailscale.com/blog/go-linker, etc) and wireguard-go using
multiple goroutines per peer, commit 16a9cfe2f4 introduced some
convoluted pathsways through Tailscale to look at packets before
they're delivered to wireguard-go and lazily reconfigure wireguard on
the fly before delivering a packet, only telling wireguard about peers
that are active.
We eventually want to remove that code and integrate wireguard-go's
configuration with Tailscale's existing netmap tracking.
To make it easier to find that code later, this makes it modular. It
saves 12 KB (of disk) to turn it off (at the expense of lots of RAM),
but that's not really the point. The point is rather making it obvious
(via the new constants) where this code even is.
Updates #12614
Change-Id: I113b040f3e35f7d861c457eaa710d35f47cee1cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves only 12 KB, but notably removes some deps on packages that future
changes can then eliminate entirely.
Updates #12614
Change-Id: Ibf830d3ee08f621d0a2011b1d4cd175427ef50df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 86 KB.
And stop depending on expvar and usermetrics when disabled,
in prep to removing all the expvar/metrics/tsweb stuff.
Updates #12614
Change-Id: I35d2479ddd1d39b615bab32b1fa940ae8cbf9b11
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On platforms that are causing EPIPE at a high frequency this is
resulting in non-working connections, for example when Apple decides to
forcefully close UDP sockets due to an unsoliced packet rejection in the
firewall.
Too frequent rebinds cause a failure to solicit the endpoints triggering
the rebinds, that would normally happen via CallMeMaybe.
Updates #14551
Updates tailscale/corp#25648
Signed-off-by: James Tucker <james@tailscale.com>
Help out the linker's dead code elimination.
Updates #12614
Change-Id: I6c13cb44d3250bf1e3a01ad393c637da4613affb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#32600
A localAPI/cli call to reload-config can end up leaving magicsock's mutex
locked. We were missing an unlock for the early exit where there's no change in
the static endpoints when the disk-based config is loaded. This is not likely
the root cause of the linked issue - just noted during investigation.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This commit does not change the order or meaning of any eventbus activity, it
only updates the way the plumbing is set up.
Updates #15160
Change-Id: I40c23b183c2a6a6ea3feec7767c8e5417019fc07
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Instead of waiting for a designated subscription to close as a canary for the
bus being stopped, use the bus Client's own signal for closure added in #17118.
Updates #cleanup
Change-Id: I384ea39f3f1f6a030a6282356f7b5bdcdf8d7102
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Remove the need for the caller to hold on to and call an unregister
function. Both two callers (one real, one test) already have a context
they can use. Use context.AfterFunc instead. There are no observable
side effects from scheduling too late if the goroutine doesn't run sync.
Updates #17148
Change-Id: Ie697dae0e797494fa8ef27fbafa193bfe5ceb307
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
endpointState is used for tracking UDP direct connection candidate
addresses. If it contains a DERP addr, then direct connection path
discovery will always send a wasteful disco ping over it. Additionally,
CLI "tailscale ping" via peer relay will race over DERP, leading to a
misleading result if pong arrives via DERP first.
Disco pongs arriving via DERP never influence path selection. Disco
ping/pong via DERP only serves "tailscale ping" reporting.
Updates #17121
Signed-off-by: Jordan Whited <jordan@tailscale.com>
If the DERP queue is full, drop the oldest item first, rather than the
youngest, on the assumption that older data is more likely to be
unanswerable.
Updates tailscale/corp#31762
Signed-off-by: James Tucker <james@tailscale.com>
Brad Fitzpatrick
M. J. Fromberger
Claus Lensbøl
Harry Harpham
Alex Chan
Jordan Whited
Will Norris
Raj Singh
Alex Valiushko
James Tucker
Joe Tsai
Jonathan Nobels