For manual (human) testing, this lets the user disable control plane
map polls with "tailscale set --sync=false" (which survives restarts)
and "tailscale set --sync" to restore.
A high severity health warning is shown while this is active.
Updates #12639
Updates #17945
Change-Id: I83668fa5de3b5e5e25444df0815ec2a859153a6d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Remove the State enum (StateNew, StateNotAuthenticated, etc.) from
controlclient and replace it with two explicit boolean fields:
- LoginFinished: indicates successful authentication
- Synced: indicates we've received at least one netmap
This makes the state more composable and easier to reason about, as
multiple conditions can be true independently rather than being
encoded in a single enum value.
The State enum was originally intended as the state machine for the
whole client, but that abstraction moved to ipn.Backend long ago.
This change continues moving away from the legacy state machine by
representing state as a combination of independent facts.
Also adds test helpers in ipnlocal that check independent, observable
facts (hasValidNetMap, needsLogin, etc.) rather than relying on
derived state enums, making tests more robust.
Updates #12639
Signed-off-by: James Tucker <james@tailscale.com>
updates tailscale/corp#31571
It appears that on the latest macOS, iOS and tVOS versions, the work
that netns is doing to bind outgoing connections to the default interface (and all
of the trimmings and workarounds in netmon et al that make that work) are
not needed. The kernel is extension-aware and doing nothing, is the right
thing. This is, however, not the case for tailscaled (which is not a
special process).
To allow us to test this assertion (and where it might break things), we add a
new node cap that turns this behaviour off only for network-extension equipped clients,
making it possible to turn this off tailnet-wide, without breaking any tailscaled
macos nodes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
When systemd notification support was omitted from the build, or on
non-Linux systems, we were unnecessarily emitting code and generating
garbage stringifying addresses upon transition to the Running state.
Updates #12614
Change-Id: If713f47351c7922bb70e9da85bf92725b25954b9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* lock released early just to call `b.send` when it can call
`b.sendToLocked` instead
* `UnlockEarly` called to release the lock before trivially fast
operations, we can wait for a defer there
Updates #11649
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
A follow-up to #17411. Put AppConnector events into a task queue, as they may
take some time to process. Ensure that the queue is stopped at shutdown so that
cleanup will remain orderly.
Because events are delivered on a separate goroutine, slow processing of an
event does not cause an immediate problem; however, a subscriber that blocks
for a long time will push back on the bus as a whole. See
https://godoc.org/tailscale.com/util/eventbus#hdr-Expected_subscriber_behavior
for more discussion.
Updates #17192
Updates #15160
Change-Id: Ib313cc68aec273daf2b1ad79538266c81ef063e3
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Temporarily back out the TPM-based hw attestation code while we debug
Windows exceptions.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
This does not change which subscriptions are made, it only swaps them to use
the SubscribeFunc API instead of Subscribe.
Updates #15160
Updates #17487
Change-Id: Id56027836c96942206200567a118f8bcf9c07f64
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Saves ~94 KB from the min build.
Updates #12614
Change-Id: I3b0b8a47f80b9fd3b1038c2834b60afa55bf02c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Before we introduced seamless, the "blocked" state was used to track:
* Whether a login was required for connectivity, and therefore we should
keep the engine deconfigured until that happened
* Whether authentication was in progress
"blocked" would stop authReconfig from running. We want this when a login is
required: if your key has expired we want to deconfigure the engine and keep
it down, so that you don't keep using exit nodes (which won't work because
your key has expired).
Taking the engine down while auth was in progress was undesirable, so we
don't do that with seamless renewal. However, not entering the "blocked"
state meant that we needed to change the logic for when to send
LoginFinished on the IPN bus after seeing StateAuthenticated from the
controlclient. Initially we changed the "if blocked" check to "if blocked or
seamless is enabled" which was correct in other places.
In this place however, it introduced a bug: we are sending LoginFinished
every time we see StateAuthenticated, which happens even on a down & up, or
a profile switch. This in turn made it harder for UI clients to track when
authentication is complete.
Instead we should only send it out if we were blocked (i.e. seamless is
disabled, or our key expired) or an auth was in progress.
Updates tailscale/corp#31476
Updates tailscale/corp#32645
Fixes#17363
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Saves 45 KB from the min build, no longer pulling in deephash or
util/hashx, both with unsafe code.
It can actually be more efficient to not use deephash, as you don't
have to walk all bytes of all fields recursively to answer that two
things are not equal. Instead, you can just return false at the first
difference you see. And then with views (as we use ~everywhere
nowadays), the cloning the old value isn't expensive, as it's just a
pointer under the hood.
Updates #12614
Change-Id: I7b08616b8a09b3ade454bb5e0ac5672086fe8aec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add subscribers for AppConnector events
Make the RouteAdvertiser interface optional We cannot yet remove it because
the tests still depend on it to verify correctness. We will need to separately
update the test fixtures to remove that dependency.
Publish RouteInfo via the event bus, so we do not need a callback to do that.
Replace it with a flag that indicates whether to treat the route info the connector
has as "definitive" for filtering purposes.
Update the tests to simplify the construction of AppConnector values now that a
store callback is no longer required. Also fix a couple of pre-existing racy tests that
were hidden by not being concurrent in the same way production is.
Updates #15160
Updates #17192
Change-Id: Id39525c0f02184e88feaf0d8a3c05504850e47ee
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
If we received a wg engine status while processing an auth URL, there was a
race condition where the authURL could be reset to "" immediately after we
set it.
To fix this we need to check that we are moving from a non-Running state to
a Running state rather than always resetting the URL when we "move" into a
Running state even if that is the current state.
We also need to make sure that we do not return from stopEngineAndWait until
the engine is stopped: before, we would return as soon as we received any
engine status update, but that might have been an update already in-flight
before we asked the engine to stop. Now we wait until we see an update that
is indicative of a stopped engine, or we see that the engine is unblocked
again, which indicates that the engine stopped and then started again while
we were waiting before we checked the state.
Updates #17388
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Co-authored-by: Nick Khyl <nickk@tailscale.com>
This patch removes some code that didn’t get removed before merging
the changes in #16580.
Updates #cleanup
Updates #16551
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The control plane will sometimes determine that a node is not online,
while the node is still able to connect to its peers. This patch
doesn’t solve this problem, but it does mitigate it.
This PR introduces the `client-side-reachability` node attribute that
switches the node to completely ignore the online signal from control.
In the future, the client itself should collect reachability data from
active Wireguard flows and Tailscale pings.
Updates #17366
Updates tailscale/corp#30379
Updates tailscale/corp#32686
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Whenever running on a platform that has a TPM (and tailscaled can access
it), default to encrypting the state. The user can still explicitly set
this flag to disable encryption.
Updates https://github.com/tailscale/corp/issues/32909
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Require the presence of the bus, but do not use it yet. Check for required
fields and update tests and production use to plumb the necessary arguments.
Updates #15160
Updates #17192
Change-Id: I8cefd2fdb314ca9945317d3320bd5ea6a92e8dcb
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Replace the positional arguments to NewAppConnector with a Config struct.
Update the existing uses. Other than the API change, there are no functional
changes in this commit.
Updates #15160
Updates #17192
Change-Id: Ibf37f021372155a4db8aaf738f4b4f2c746bf623
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
It never launched and I've lost hope of it launching and it's in my
way now, so I guess it's time to say goodbye.
Updates tailscale/corp#4383
Updates #17305
Change-Id: I2eb551d49f2fb062979cc307f284df4b3dfa5956
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 328 KB (2.5%) off the minimal binary.
For IoT devices that don't need MagicDNS (e.g. they don't make
outbound connections), this provides a knob to disable all the DNS
functionality.
Rather than a massive refactor today, this uses constant false values
as a deadcode sledgehammer, guided by shotizam to find the largest DNS
functions which survived deadcode.
A future refactor could make it so that the net/dns/resolver and
publicdns packages don't even show up in the import graph (along with
their imports) but really it's already pretty good looking with just
these consts, so it's not at the top of my list to refactor it more
soon.
Also do the same in a few places with the ACME (cert) functionality,
as I saw those while searching for DNS stuff.
Updates #12614
Change-Id: I8e459f595c2fde68ca16503ff61c8ab339871f97
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allow the user to access information about routes an app connector has
learned, such as how many routes for each domain.
Fixestailscale/corp#32624
Signed-off-by: Fran Bull <fran@tailscale.com>
Removes 434 KB from the minimal Linux binary, or ~3%.
Primarily this comes from not linking in the zstd encoding code.
Fixes#17323
Change-Id: I0a90de307dfa1ad7422db7aa8b1b46c782bfaaf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And yay: tsnet (and thus k8s-operator etc) no longer depends on
portlist! And LocalBackend is smaller.
Removes 50 KB from the minimal binary.
Updates #12614
Change-Id: Iee04057053dc39305303e8bd1d9599db8368d926
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We made changes to ipnext callback registration/unregistration/invocation in #15780
that made resetting b.exthost to a nil, no-op host in (*LocalBackend).Shutdown() unnecessary.
But resetting it is also racy: b.exthost must be safe for concurrent use with or without b.mu held,
so it shouldn't be written after NewLocalBackend returns. This PR removes it.
Fixes#17279
Signed-off-by: Nick Khyl <nickk@tailscale.com>
I think this was originally a brain-o in 9380e2dfc6. It's
disabling the port _poller_, listing what open ports (i.e. services)
are open, not PMP/PCP/UPnP port mapping.
While there, drop in some more testenv.AssertInTest() in a few places.
Updates #cleanup
Change-Id: Ia6f755ad3544f855883b8a7bdcfc066e8649547b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
James Tucker
James 'zofrex' Sanderson
Jonathan Nobels
Andrew Lytvynov
M. J. Fromberger
Patrick O'Doherty
Simon Law
Claus Lensbøl
Nick Khyl
Fran Bull