Add a new tailcfg.NodeCapability (NodeAttrCacheNetworkMaps) to control whether
a node with support for caching network maps will attempt to do so. Update the
capability version to reflect this change (mainly as a safety measure, as the
control plane does not currently need to know about it).
Use the presence (or absence) of the node attribute to decide whether to create
and update a netmap cache for each profile. If caching is disabled, discard the
cached data; this allows us to use the presence of a cached netmap as an
indicator it should be used (unless explicitly overridden). Add a test that
verifies the attribute is respected. Reverse the sense of the environment knob
to be true by default, with an override to disable caching at the client
regardless what the node attribute says.
Move the creation/update of the netmap cache (when enabled) until after
successfully applying the network map, to reduce the possibility that we will
cache (and thus reuse after a restart) a network map that fails to correctly
configure the client.
Updates #12639
Change-Id: I1df4dd791fdb485c6472a9f741037db6ed20c47e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
See https://www.wireshark.org/; there's no intercapped S.
Updates #cleanup
Change-Id: I7c89a3fc6fb0436d0ce0e25a620bde7e310e89d2
Signed-off-by: Alex Chan <alexc@tailscale.com>
On Linux batching.Conn will now write a vector of
coalesced buffers via sendmmsg(2) instead of copying
fragments into a single buffer.
Scatter-gather I/O has been available on Linux since the
earliest days (reworked in 2.6.24). Kernel passes fragments
to the driver if it supports it, otherwise linearizes
upon receiving the data.
Removing the copy overhead from userspace yields up to 4-5%
packet and bitrate improvement on Linux with GSO enabled:
46Gb/s 4.4m pps vs 44Gb/s 4.2m pps w/32 Peer Relay client flows.
Updates tailscale/corp#36989
Change-Id: Idb2248d0964fb011f1c8f957ca555eab6a6a6964
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
By polling RTM_GETSTATS via netlink. RTM_GETSTATS is a relatively
efficient and targeted (single device) polling method available since
Linux v4.7.
The tundevstats "feature" can be extended to other platforms in the
future, and it's trivial to add new rtnl_link_stats64 counters on
Linux.
Updates tailscale/corp#38181
Signed-off-by: Jordan Whited <jordan@tailscale.com>
When we don't care about the payload value and are just checking whether
a set contains an IP/prefix, we can use `bart.Lite` for the same lookup
times but a lower memory footprint.
Fixes#19075
Change-Id: Ia709e8b718666cc61ea56eac1066467ae0b6e86c
Signed-off-by: Alex Chan <alexc@tailscale.com>
When racing multiple upstream DNS resolvers, a REFUSED (RCode 5) response
from a broken or misconfigured resolver could win the race and be returned
to the client before healthier resolvers had a chance to respond with a
valid answer. This caused complete DNS failure in cases where, e.g., a
broken upstream resolver returned REFUSED quickly while a working resolver
(such as 1.1.1.1) was still responding.
Previously, only SERVFAIL (RCode 2) was treated as a soft error. REFUSED
responses were returned as successful bytes and could win the race
immediately. This change also treats REFUSED as a soft error in the UDP
and TCP forwarding paths, so the race continues until a better answer
arrives. If all resolvers refuse, the first REFUSED response is returned
to the client.
Additionally, SERVFAIL responses from upstream resolvers are now returned
verbatim to the client rather than replaced with a locally synthesized
packet. Synthesized SERVFAIL responses were authoritative and guaranteed
to include a question section echoing the original query; upstream
responses carry no such guarantees but may include extended error
information (e.g. RFC 8914 extended DNS errors) that would otherwise
be lost.
Fixes#19024
Signed-off-by: Brendan Creane <bcreane@gmail.com>
When a client starts up without being able to connect to control, it
sends its discoKey to other nodes it wants to communicate with over
TSMP. This disco key will be a newer key than the one control knows
about.
If the client that can connect to control gets a full netmap, ensure
that the disco key for the node not connected to control is not
overwritten with the stale key control knows about.
This is implemented through keeping track of mapSession and use that for
the discokey injection if it is available. This ensures that we are not
constantly resetting the wireguard connection when getting the wrong
keys from control.
This is implemented as:
- If the key is received via TSMP:
- Set lastSeen for the peer to now()
- Set online for the peer to false
- When processing new keys, only accept keys where either:
- Peer is online
- lastSeen is newer than existing last seen
If mapSession is not available, as in we are not yet connected to
control, punt down the disco key injection to magicsock.
Ideally, we will want to have mapSession be long lived at some point in
the near future so we only need to inject keys in one location and then
also use that for testing and loading the cache, but that is a yak for
another PR.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
If an NRPT rule lists more than one server, those servers should be separated by a semicolon (";"),
rather than a semicolon followed by a space ("; "). Otherwise, Windows fails to parse the created
registry value, and DNS resolution may fail.
https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-gpnrpt/06088ca3-4cf1-48fa-8837-ca8d853ee1e8Fixes#19040
Updates #15404 (enabled MagicDNS IPv6 by default, adding a second server and triggering the issue)
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Two methods could deadlock during shutdown when closing the wrapper.
Ensure that the writers are aware of the wrapper being closed.
Fixes#19037
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
These were previously swappable for historical reasons that are no
longer relevant.
Removing the indirection enables future inlining optimizations if we
simplify further.
Updates tailscale/corp#38703
Signed-off-by: Jordan Whited <jordan@tailscale.com>
For the purpose of improved observability of UDP socket receive buffer
overflows on Linux.
Updates tailscale/corp#37679
Signed-off-by: Jordan Whited <jordan@tailscale.com>
After switching from cellular to wifi without ipv6, ForeachInterface still sees rmnet prefixes, so HaveV6 stays true, and magicsock keeps attempting ipv6 connections that either route through cellular or time out for users on wifi without ipv6
This:
-Adds SetAndroidBindToNetworkFunc, a callback to bind the socket to the selected Android Network object
Updates tailscale/tailscale#6152
Signed-off-by: kari-ts <kari@tailscale.com>
ReadFromUDPAddrPort worked if UDP GRO was unsupported, but we don't
actually want attempted usage, nor does any exist today. Future work
on tailscale/corp#37679 would have required more complexity in this
method, vs clarifying the API intents.
Updates tailscale/corp#37679
Signed-off-by: Jordan Whited <jordan@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix its/it's, who's/whose, wether/whether, missing apostrophes
in contractions, and other misspellings across the codebase.
Updates #cleanup
Change-Id: I20453b81a7aceaa14ea2a551abba08a2e7f0a1d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
OpenWrt is changing to using alpine like `apk` for package installation
over its previous opkg. Additionally, they are not using the same repo
files as alpine making installation fail.
Add support for the new repository files and ensure that the required
package detection system uses apk.
Updates #18535
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Go 1.26's url.Parser is stricter and made our tests elsewhere fail
with this scheme because when these listen addresses get shoved
into a URL, it can't parse back out.
I verified this makes tests elsewhere pass with Go 1.26.
Updates #18682
Change-Id: I04dd3cee591aa85a9417a0bbae2b6f699d8302fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
runtime.NumCPU() returns the number of CPUs on the host, which in
containerized environments is the node's CPU count rather than the
container's CPU limit. This causes excessive memory allocation in
pods with low CPU requests running on large nodes, as each socket's
packetReadLoop allocates significant buffer memory.
Use runtime.GOMAXPROCS(0) instead, which is container-aware since
Go 1.25 and respects CPU limits set via cgroups.
Fixes#18774
Signed-off-by: Daniel Pañeda <daniel.paneda@clickhouse.com>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
To be less spammy in stable, add a nob that disables the creation and
processing of TSMPDiscoKeyAdvertisements until we have a proper rollout
mechanism.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Windows and macOS are not covered by this change, as neither have safely
distinct names to make it easy to do so. This covers the requested case
on Linux.
Updates #18824
Signed-off-by: James Tucker <james@tailscale.com>
When an exit node has been set and a new default route is added,
create a new rtable in the default rdomain and add the current
default route via its physical interface. When control() is
requesting a connection not go through the exit-node default route,
we can use the SO_RTABLE socket option to force it through the new
rtable we created.
Updates #17321
Signed-off-by: joshua stein <jcs@jcs.org>
The new version of app connector (conn25) needs to read DNS responses
for domains it is interested in and store and swap out IP addresses.
Add a hook to dns manager to enable this.
Give the conn25 updated netmaps so that it knows when to assign
connecting addresses and from what pool.
Assign an address when we see a DNS response for a domain we are
interested in, but don't do anything with the address yet.
Updates tailscale/corp#34252
Signed-off-by: Fran Bull <fran@tailscale.com>
fixestailscale/corp#37048
We're duplicating logic in AnyInterfaceUp in the ChangeDelta
and we're duplicating it wrong. The new State has the logic
for this based on the HaveV6 and HaveV4 flags.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This adds a new ControlKnob to make MagicDNS IPv6 registration
(telling systemd/etc) opt-out rather than opt-in.
Updates #15404
Change-Id: If008e1cb046b792c6aff7bb1d7c58638f7d650b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the absence of a better mechanism, writing unqualified hostnames to the hosts file may be required
for MagicDNS to work on some Windows environments, such as domain-joined machines. It can also
improve MagicDNS performance on non-domain joined devices when we are not the device's primary
DNS resolver.
At the same time, updating the hosts file can be slow and expensive, especially when it already contains
many entries, as was previously reported in #14327. It may also have negative side effects, such as interfering
with the system's DNS resolution policies.
Additionally, to fix#18712, we had to extend hosts file usage to domain-joined machines when we are not
the primary DNS resolver. For the reasons above, this change may introduce risk.
To allow customers to disable hosts file updates remotely without disabling MagicDNS entirely, whether on
domain-joined machines or not, this PR introduces the `disable-hosts-file-updates` node attribute.
Updates #18712
Updates #14327
Signed-off-by: Nick Khyl <nickk@tailscale.com>
On domain-joined Windows devices the primary search domain (the one the device is joined to)
always takes precedence over other search domains. This breaks MagicDNS when we are the primary
resolver on the device (see #18712). To work around this Windows behavior, we should write MagicDNS
host names the hosts file just as we do when we're not the primary resolver.
This commit does exactly that.
Fixes#18712
Signed-off-by: Nick Khyl <nickk@tailscale.com>
fixestailscale/tailscale#18436
Queries can still make their way to the forwarder when accept-dns is disabled.
Since we have not configured the forwarder if --accept-dns is false, this errors out
(correctly) but it also generates a persistent health warning. This forwards the
Pref setting all the way through the stack to the forwarder so that we can be more
judicious about when we decide that the forward path is unintentionally missing, vs
simply not configured.
Testing:
tailscale set --accept-dns=false. (or from the GUI)
dig @100.100.100.100 example.com
tailscale status
No dns related health warnings should be surfaced.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
app connector packets
We introduce the Conn25PacketHooks interface to be used as a nil-able
field in userspaceEngine. The engine then plumbs through the functions
to the corresponding tstun.Wrapper intercepts.
The new intercepts run pre-filter when egressing toward WireGuard,
and post-filter when ingressing from WireGuard. This is preserve the
design invariant that the filter recognizes the traffic as interesting
app connector traffic.
This commit does not plumb through implementation of the interface, so
should be a functional no-op.
Fixestailscale/corp#35985
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
The forwarder was not setting the Truncated (TC) flag when UDP DNS
responses exceeded either the EDNS buffer size (if present) or the
RFC 1035 default 512-byte limit. This affected DoH, TCP fallback,
and UDP response paths.
The fix ensures checkResponseSizeAndSetTC is called in all code paths
that return UDP responses, enforcing both EDNS and default UDP size
limits.
Added comprehensive unit tests and consolidated duplicate test helpers.
Updates #18107
Signed-off-by: Brendan Creane <bcreane@gmail.com>
This adds a new node capability 'dns-subdomain-resolve' that signals
that all of hosts' subdomains should resolve to the same IP address.
It allows wildcard matching on any node marked with this capability.
This change also includes an util/dnsname utility function that lets
us access the parent of a full qualified domain name. MagicDNS takes
this function and recursively searchs for a matching real node name.
One important thing to observe is that, in this context, a subdomain
can have multiple sub labels. This means that for a given node named
machine, both my.machine and be.my.machine will be a positive match.
Updates #1196
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
When tailscaled gets started with userspace networking, it won't
modify your system's network configuration. For this, it creates
a noopManager for DNS management. noopManager correctly observes
that there's no real OS DNS to send queries to. This leads to we
completely dropping any DNS internal resolution from `dns query`
This change alters this so that even without a base config we'll
still allow the internal resolver to handle internal DNS queries
Fixes#18354
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
The Tailscale CLI has some methods to watch the IPN bus for
messages, say, the current netmap (`tailscale debug netmap`).
The Tailscale daemon supports this using a streaming HTTP
response. Sometimes, the client can close its connection
abruptly -- due to an interruption, or in the case of `debug netmap`,
intentionally after consuming one message.
If the server daemon is writing a response as the client closes
its end of the socket, the daemon typically encounters a "broken pipe"
error. The "Watch IPN Bus" handler currently logs such errors after
they're propagated by a JSON encoding/writer helper.
Since the Tailscale CLI nominally closes its socket with the daemon
in this slightly ungraceful way (viz. `debug netmap`), stop logging
these broken pipe errors as far as possible. This will help avoid
confounding users when they scan backend logs.
Updates #18477
Signed-off-by: Amal Bansode <amal@tailscale.com>
Someone asked me if we use DNS-over-HTTPS if the system's resolver is an
IP address that supports DoH and there's no global nameserver set (i.e.
no "Override DNS servers" set). I didn't know the answer offhand, and it
took a while for me to figure it out. The answer is yes, in cases where
we take over the system's DNS configuration and read the base config, we
do upgrade any DoH-capable resolver to use DoH. Here's a test that
verifies this behaviour (and hopefully helps as documentation the next
time someone has this question).
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
New gauge reflects endpoints state via labels:
- open, when both peers are connected and ready to talk, and
- connecting. when at least one peer hasn't connected yet.
Corresponding client metrics are logged as
- udprelay_endpoints_connecting
- udprelay_endpoints_open
Updates tailscale/corp#30820
Change-Id: Idb1baa90a38c97847e14f9b2390093262ad0ea23
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Polls IMDS (currently only AWS) for extra IPs to advertise as udprelay.
Updates #17796
Change-Id: Iaaa899ef4575dc23b09a5b713ce6693f6a6a6964
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
net/portmapper: Stop replacing the internal port with the upnp external port
This causes the UPnP mapping to break in the next recreation of the
mapping.
Fixes#18348
Signed-off-by: Eduardo Sorribas <eduardo@sorribas.org>
fixestailscale/tailscale#18418
Both Serve and PeerAPI broke when we moved the TailscaleInterfaceName
into State, which is updated asynchronously and may not be
available when we configure the listeners.
This extracts the explicit interface name property from netmon.State
and adds as a static struct with getters that have proper error
handling.
The bug is only found in sandboxed Darwin clients, where we
need to know the Tailscale interface details in order to set up the
listeners correctly (they must bind to our interface explicitly to escape
the network sandboxing that is applied by NECP).
Currently set only sandboxed macOS and Plan9 set this but it will
also be useful on Windows to simplify interface filtering in netns.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This gauge will be reworked to include endpoint state in future.
Updates tailscale/corp#30820
Change-Id: I66f349d89422b46eec4ecbaf1a99ad656c7301f9
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
M. J. Fromberger
Alex Chan
Alex Valiushko
Greg Steuck
Jordan Whited
Brendan Creane
Claus Lensbøl
Nick Khyl
kari-ts
Brad Fitzpatrick
Daniel Pañeda
Mike O'Driscoll
James Tucker
joshua stein
Fran Bull
Jonathan Nobels
Michael Ben-Ami
Fernando Serboncini
Amal Bansode
Andrew Dunham
Will Norris
Eduardo Sorribas
Anton Tolchanov