PR #14771 added support for getting certs from alternate ACME servers, but the
certStore caching mechanism breaks unless you install the CA in system roots,
because we check the validity of the cert before allowing a cache hit, which
includes checking for a valid chain back to a trusted CA. For ease of testing,
allow cert cache hits when the chain is unknown to avoid re-issuing the cert
on every TLS request served. We will still get a cache miss when the cert has
expired, as enforced by a test, and this makes it much easier to test against
non-prod ACME servers compared to having to manage the installation of non-prod
CAs on clients.
Updates #14771
Change-Id: I74fe6593fe399bd135cc822195155e99985ec08a
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
We're computing the list of services to hash by iterating over the
values of a map, the ordering of which is not guaranteed. This can cause
the hash to fluctuate depending on the ordering if there's more than one
service hosted by the same host.
Updates tailscale/corp#25733.
Signed-off-by: Naman Sood <mail@nsood.in>
Previously, it initialized when the backend was created. This caused two problems:
1. It would not properly switch when changing profiles.
2. If the backend was created before the profile had been selected, Taildrive's shares were uninitialized.
Updates #14825
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Reads use the sanitized form, so unsanitized keys being stored
in memory resulted lookup failures, for example for serve config.
Updates tailscale/tailscale#15134
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We previously were not merging in the TaildropTarget into the PeerStatus because we did not update AddPeer.
Updates tailscale/tailscale#14393
Signed-off-by: kari-ts <kari@tailscale.com>
Implements a KMS input for AWS parameter to support encrypting Tailscale
state
Fixes#14765
Change-Id: I39c0fae4bfd60a9aec17c5ea6a61d0b57143d4ba
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
This commit updates the logic of vipServicesFromPrefsLocked, so that it would return the vipServices list
even when service host is only advertising the service but not yet serving anything. This makes control
always get accurate state of service host in terms of serving a service.
Fixestailscale/corp#26843
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
To avoid duplicate issuances/slowness while the state Secret
contains a mismatched cert and key.
Updates tailscale/tailscale#15134
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In this PR, we update the LocalBackend so that when the ReconnectAfter policy setting is configured
and a user disconnects Tailscale by setting WantRunning to false in the profile prefs, the LocalBackend
will now start a timer to set WantRunning back to true once the ReconnectAfter timer expires.
We also update the ADMX/ADML policy definitions to allow configuring this policy setting for Windows
via Group Policy and Intune.
Updates #14824
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already reset the always-on override flag when switching profiles and in a few other cases.
In this PR, we update (*LocalBackend).Start() to reset it as well. This is necessary to support
scenarios where Start() is called explicitly, such as when the GUI starts or when tailscale up is used
with additional flags and passes prefs via ipn.Options in a call to Start() rather than via EditPrefs.
Additionally, we update it to apply policy settings to the current prefs, which is necessary
for properly overriding prefs specified in ipn.Options.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Hostinfo.WireIngress is used as a hint that the node intends to use
funnel. We now send another field, IngressEnabled, in cases where
funnel is explicitly enabled, and the logic control-side has
been changed to look at IngressEnabled as well as WireIngress in all
cases where previously the hint was used - so we can now stop sending
WireIngress when IngressEnabled is true to save some bandwidth.
Updates tailscale/tailscale#11572
Updates tailscale/corp#25931
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In this PR, we enable the registration of LocalBackend extensions to exclude code specific to certain
platforms or environments. We then introduce desktopSessionsExt, which is included only in Windows builds
and only if the ts_omit_desktop_sessions tag is disabled for the build. This extension tracks desktop sessions
and switches to (or remains on) the appropriate profile when a user signs in or out, locks their screen,
or disconnects a remote session.
As desktopSessionsExt requires an ipn/desktop.SessionManager, we register it with tsd.System
for the tailscaled subprocess on Windows.
We also fix a bug in the sessionWatcher implementation where it attempts to close a nil channel on stop.
Updates #14823
Updates tailscale/corp#26247
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Introduce new TaildropTargetStatus in PeerStatus
Refactor getTargetStableID to solely rely on Status() instead of calling FileTargets(). This removes a possible race condition between the two calls and provides more detailed failure information if a peer can't receive files.
Updates tailscale/tailscale#14393
Signed-off-by: kari-ts <kari@tailscale.com>
In this PR, we further refactor LocalBackend and Unattended Mode to extract the logic that determines
which profile should be used at the time of the check, such as when a LocalAPI client connects or disconnects.
We then update (*LocalBackend).switchProfileLockedOnEntry to to switch to the profile returned by
(*LocalBackend).resolveBestProfileLocked() rather than to the caller-specified specified profile, and rename it
to switchToBestProfileLockedOnEntry.
This is done in preparation for updating (*LocalBackend).getBackgroundProfileIDLocked to support Always-On
mode by determining which profile to use based on which users, if any, are currently logged in and have an active
foreground desktop session.
Updates #14823
Updates tailscale/corp#26247
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, we disconnect Tailscale and reset LocalBackend on Windows when the last LocalAPI client
disconnects, unless Unattended Mode is enabled for the current profile. And the implementation
is somewhat racy since the current profile could theoretically change after
(*ipnserver.Server).addActiveHTTPRequest checks (*LocalBackend).InServerMode() and before it calls
(*LocalBackend).SetCurrentUser(nil) (or, previously, (*LocalBackend).ResetForClientDisconnect).
Additionally, we might want to keep Tailscale running and connected while a user is logged in
rather than tying it to whether a LocalAPI client is connected (i.e., while the GUI is running),
even when Unattended Mode is disabled for a profile. This includes scenarios where the new
AlwaysOn mode is enabled, as well as when Tailscale is used on headless Windows editions,
such as Windows Server Core, where the GUI is not supported. It may also be desirable to switch
to the "background" profile when a user logs off from their device or implement other similar
features.
To facilitate these improvements, we move the logic from ipnserver.Server to ipnlocal.LocalBackend,
where it determines whether to keep Tailscale running when the current user disconnects.
We also update the logic that determines whether a connection should be allowed to better reflect
the fact that, currently, LocalAPI connections are not allowed unless:
- the current UID is "", meaning that either we are not on a multi-user system or Tailscale is idle;
- the LocalAPI client belongs to the current user (their UIDs are the same);
- the LocalAPI client is Local System (special case; Local System is always allowed).
Whether Unattended Mode is enabled only affects the error message returned to the Local API client
when the connection is denied.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This PR adds a new package, ipn/desktop, which provides a platform-agnostic
interface for enumerating desktop sessions and registering session callbacks.
Currently, it is implemented only for Windows.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
WindowsActor is an ipnauth.Actor implementation that represents a logged-in
Windows user by wrapping their Windows user token.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The context carries additional information about the actor, such as the
request reason, and is canceled when the actor is done.
Additionally, we implement three new ipn.Actor types that wrap other actors
to modify their behavior:
- WithRequestReason, which adds a request reason to the actor;
- WithoutClose, which narrows the actor's interface to prevent it from being
closed;
- WithPolicyChecks, which adds policy checks to the actor's CheckProfileAccess
method.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
There’s (*LocalBackend).ResetForClientDisconnect, and there’s also (*LocalBackend).resetForProfileChangeLockedOnEntry.
Both methods essentially did the same thing but in slightly different ways. For example, resetForProfileChangeLockedOnEntry didn’t reset the control client until (*LocalBackend).Start() was called at the very end and didn’t reset the keyExpired flag, while ResetForClientDisconnect didn’t reinitialize TKA.
Since SetCurrentUser can be called with a nil argument to reset the currently connected user and internally calls resetForProfileChangeLockedOnEntry, we can remove ResetForClientDisconnect and let SetCurrentUser and resetForProfileChangeLockedOnEntry handle it.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, profileManager filters profiles based on their creator/owner and the "current user"'s UID.
This causes DefaultUserProfileID(uid) to work incorrectly when the UID doesn't match the current user.
While we plan to remove the concept of the "current user" completely, we're not there yet.
In this PR, we fix DefaultUserProfileID by updating profileManager to allow checking profile access
for a given UID and modifying helper methods to accept UID as a parameter when returning
matching profiles.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
updates tailscale/corp#25687
The darwin appstore and standalone clients now support XPC and the keychain for passing user credentials securely between the gui process and an NEVPNExtension hosted tailscaled. Clients that can communicate directly with the network extension, via XPC or the keychain, are now expected to call SetCredentials and supply credentials explicitly, fixing issues with the cli breaking if the current user cannot read the contents of /Library/Tailscale due to group membership restrictions. This matches how those clients source and supply credentials to the localAPI http client.
Non-platform-specific code that has traditionally been in the client is moved to safesocket.
/Libraray/Tailscaled/sameuserproof has its permissions changed to that it's readably only by users in the admin group. This restricts standalone CLI access for and direct use of localAPI to admins.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
It was moved in f57fa3cbc3.
Updates tailscale/corp#22748
Change-Id: I19f965e6bded1d4c919310aa5b864f2de0cd6220
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With #14843 merged, (*localapi.Handler).servePrefs() now requires a non-nil actor,
and other places may soon require it as well.
In this PR, we update localapi.NewHandler with a new required parameter for the actor.
We then update tsnet to use ipnauth.Self.
We also rearrange the code in (*ipnserver.Server).serveHTTP() to pass the actor via Handler's
constructor instead of the field.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we move the code that checks the AlwaysOn policy from ipnserver.actor to ipnauth.
It is intended to be used by ipnauth.Actor implementations, and we temporarily make it exported
while these implementations reside in ipnserver and in corp. We'll unexport it later.
We also update [ipnauth.Actor.CheckProfileAccess] to accept an auditLogger, which is called
to write details about the action to the audit log when required by the policy, and update
LocalBackend.EditPrefsAs to use an auditLogger that writes to the regular backend log.
Updates tailscale/corp#26146
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Without adding this, the packet filter rejects traffic to VIP service
addresses before checking the filters sent in the netmap.
Fixestailscale/corp#26241
Change-Id: Idd54448048e9b786cf4873fd33b3b21e03d3ad4c
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Many places that need to work with node/peer capabilities end up with a
something-View and need to either reimplement the helper code or make an
expensive copy. We have the machinery to easily handle this now.
Updates #cleanup
Change-Id: Ic3f55be329f0fc6c178de26b34359d0e8c6ca5fc
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Observed on some airlines (British Airways, WestJet), Squid is
configured to cache and transform these results, which is disruptive.
The server and client should both actively request that this is not done
by setting Cache-Control headers.
Send a timestamp parameter to further work against caches that do not
respect the cache-control headers.
Updates #14856
Signed-off-by: James Tucker <james@tailscale.com>
In this PR, we update client/tailscale.LocalClient to allow sending requests with an optional X-Tailscale-Reason
header. We then update ipn/ipnserver.{actor,Server} to retrieve this reason, if specified, and use it to determine
whether ipnauth.Disconnect is allowed when the AlwaysOn.OverrideWithReason policy setting is enabled.
For now, we log the reason, along with the profile and OS username, to the backend log.
Finally, we update LocalBackend to remember when a disconnect was permitted and do not reconnect automatically
unless the policy changes.
Updates tailscale/corp#26146
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The AlwaysOn policy can be applied by (*LocalBackend).applySysPolicy, flipping WantRunning from false to true
before (*LocalBackend).Start() has been called for the first time and set a control client in b.cc. This results in a nil
pointer dereference and a panic when setPrefsLockedOnEntry applies the change and calls controlclient.Client.Login().
In this PR, we fix it by only doing a login if b.cc has been set.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The upstream crypto package now supports sending banners at any time during
authentication, so the Tailscale fork of crypto/ssh is no longer necessary.
github.com/tailscale/golang-x-crypto is still needed for some custom ACME
autocert functionality.
tempfork/gliderlabs is still necessary because of a few other customizations,
mostly related to TTY handling.
Originally implemented in 46fd4e58a2,
which was reverted in b60f6b849a to
keep the change out of v1.80.
Updates #8593
Signed-off-by: Percy Wegmann <percy@tailscale.com>
In this PR, we update LocalBackend to set WantRunning=true when applying policy settings
to the current profile's prefs, if the "always-on" mode is enabled.
We also implement a new (*LocalBackend).EditPrefsAs() method, which is like EditPrefs
but accepts an actor (e.g., a LocalAPI client's identity) that initiated the change.
If WantRunning is being set to false, the new EditPrefsAs method checks whether the actor
has ipnauth.Disconnect access to the profile and propagates an error if they do not.
Finally, we update (*ipnserver.actor).CheckProfileAccess to allow a disconnect
only if the "always-on" mode is not enabled by the AlwaysOn policy setting.
This is not a comprehensive solution to the "always-on" mode across platforms,
as instead of disconnecting a user could achieve the same effect by creating
a new empty profile, initiating a reauth, or by deleting the profile.
These are the things we should address in future PRs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The implementations define it to verify whether the actor has the requested access to a login profile.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Conventionally, we use views (e.g., ipn.PrefsView, tailcfg.NodeView, etc.) when
dealing with structs that shouldn't be mutated. However, ipn.LoginProfile has been
an exception so far, with a mix of passing and returning LoginProfile by reference
(allowing accidental mutations) and by value (which is wasteful, given its
current size of 192 bytes).
In this PR, we generate an ipn.LoginProfileView and use it instead of passing/returning
LoginProfiles by mutable reference or copying them when passing/returning by value.
Now, LoginProfiles can only be mutated by (*profileManager).setProfilePrefs.
Updates #14823
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This reverts commit 46fd4e58a2.
We don't want to include this in 1.80 yet, but can add it back post 1.80.
Updates #8593
Signed-off-by: Percy Wegmann <percy@tailscale.com>
The upstream crypto package now supports sending banners at any time during
authentication, so the Tailscale fork of crypto/ssh is no longer necessary.
github.com/tailscale/golang-x-crypto is still needed for some custom ACME
autocert functionality.
tempfork/gliderlabs is still necessary because of a few other customizations,
mostly related to TTY handling.
Updates #8593
Signed-off-by: Percy Wegmann <percy@tailscale.com>
It was a temporary migration over four years ago. It's no longer
relevant.
Updates #610
Change-Id: I1f00c9485fab13ede6f77603f7d4235222c2a481
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We've been maintaining temporary dev forks of golang.org/x/crypto/{acme,ssh}
in https://github.com/tailscale/golang-x-crypto instead of using
this repo's tempfork directory as we do with other packages. The reason we were
doing that was because x/crypto/ssh depended on x/crypto/ssh/internal/poly1305
and I hadn't noticed there are forwarding wrappers already available
in x/crypto/poly1305. It also depended internal/bcrypt_pbkdf but we don't use that
so it's easy to just delete that calling code in our tempfork/ssh.
Now that our SSH changes have been upstreamed, we can soon unfork from SSH.
That leaves ACME remaining.
This change copies our tailscale/golang-x-crypto/acme code to
tempfork/acme but adds a test that our vendored copied still matches
our tailscale/golang-x-crypto repo, where we can continue to do
development work and rebases with upstream. A comment on the new test
describes the expected workflow.
While we could continue to just import & use
tailscale/golang-x-crypto/acme, it seems a bit nicer to not have that
entire-fork-of-x-crypto visible at all in our transitive deps and the
questions that invites. Showing just a fork of an ACME client is much
less scary. It does add a step to the process of hacking on the ACME
client code, but we do that approximately never anyway, and the extra
step is very incremental compared to the existing tedious steps.
Updates #8593
Updates #10238
Change-Id: I8af4378c04c1f82e63d31bf4d16dba9f510f9199
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had the debug packet capture code + Lua dissector in the CLI + the
iOS app. Now we don't, with tests to lock it in.
As a bonus, tailscale.com/net/packet and tailscale.com/net/flowtrack
no longer appear in the CLI's binary either.
A new build tag ts_omit_capture disables the packet capture code and
was added to build_dist.sh's --extra-small mode.
Updates #12614
Change-Id: I79b0628c0d59911bd4d510c732284d97b0160f10
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds an envknob setting for changing the client's ACME directory URL.
This allows testing cert issuing against LE's staging environment, as
well as enabling local-only test environments, which is useful for
avoiding the production rate limits in test and development scenarios.
Fixes#14761
Change-Id: I191c840c0ca143a20e4fa54ea3b2f9b7cbfc889f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The CN field is technically deprecated; set the requested name in a DNS SAN
extension in addition to maximise compatibility with RFC 8555.
Fixes#14762
Change-Id: If5d27f1e7abc519ec86489bf034ac98b2e613043
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
If we fail to parse the upstream DNS response in an app connector, we
might miss new IPs for the target domain. Log parsing errors to be able
to diagnose that.
Updates #14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This pulls out the Wake-on-LAN (WoL) code out into its own package
(feature/wakeonlan) that registers itself with various new hooks
around tailscaled.
Then a new build tag (ts_omit_wakeonlan) causes the package to not
even be linked in the binary.
Ohter new packages include:
* feature: to just record which features are loaded. Future:
dependencies between features.
* feature/condregister: the package with all the build tags
that tailscaled, tsnet, and the Tailscale Xcode project
extension can empty (underscore) import to load features
as a function of the defined build tags.
Future commits will move of our "ts_omit_foo" build tags into this
style.
Updates #12614
Change-Id: I9c5378dafb1113b62b816aabef02714db3fc9c4a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Reapply "ipn/ipnlocal: re-advertise appc routes on startup (#14609)"
This reverts commit 51adaec35a.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* ipn/ipnlocal: fix a deadlock in readvertiseAppConnectorRoutes
Don't hold LocalBackend.mu while calling the methods of
appc.AppConnector. Those methods could call back into LocalBackend and
try to acquire it's mutex.
Fixes https://github.com/tailscale/corp/issues/25965Fixes#14606
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
---------
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than using a string everywhere and needing to clarify that the
string should have the svc: prefix, create a separate type for Service
names.
Updates tailscale/corp#24607
Change-Id: I720e022f61a7221644bb60955b72cacf42f59960
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This commit intend to provide support for TCP and Web VIP services and also allow user to use Tun
for VIP services if they want to.
The commit includes:
1.Setting TCP intercept function for VIP Services.
2.Update netstack to send packet written from WG to netStack handler for VIP service.
3.Return correct TCP hander for VIP services when netstack acceptTCP.
This commit also includes unit tests for if the local backend setServeConfig would set correct TCP intercept
function and test if a hander gets returned when getting TCPHandlerForDst. The shouldProcessInbound
check is not unit tested since the test result just depends on mocked functions. There should be an integration
test to cover shouldProcessInbound and if the returned TCP handler actually does what the serveConfig says.
Updates tailscale/corp#24604
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Tom Proctor
Naman Sood
Percy Wegmann
Irbe Krumina
kari-ts
Lee Briggs
KevinLiang10
Nick Khyl
James 'zofrex' Sanderson
Brad Fitzpatrick
Jonathan Nobels
Adrian Dewhurst
James Tucker
Andrew Lytvynov