The wireguard-go device now learns its peer set solely from the live
per-peer config source that LocalBackend installs with
Engine.SetPeerConfigFunc, backed by the route manager. Peers are
created lazily on first packet and converged per peer with
Engine.SyncDevicePeer, so the full-peer-list snapshot in wgcfg.Config
and the diff-and-reconfigure machinery around it (wgcfg.Peer,
ReconfigDevice, and the engine's full device sync in
maybeReconfigWireguardLocked) are dead weight: they duplicated state
that the route manager already owns and forced every netmap change to
rebuild and rehash the entire peer list.
Delete the Peers field and the Peer type from wgcfg, along with
ReconfigDevice and maybeReconfigWireguardLocked. Engine.Reconfig no
longer does any device peer work; it only manages the private key,
addresses, and the non-peer subsystems. Full-netmap application converges the device by
syncing exactly the peers whose routes the route manager reports as
changed or removed.
Updates #12542
Change-Id: Ic776e42cfaa5be6b9329b3d381d5cbde17d7078b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
wgcfg.Config.NetworkLogging carried the network flow logging identity
inside the WireGuard config, where it was unrelated to WireGuard; it
lived there mainly so that identity changes would defeat Reconfig's
ErrNoChanges check and reach the netlog startup/shutdown logic.
Remove the field and move the whole netlog lifecycle into a new
feature/netlog package, installed on the engine via the new
wgengine.HookNewNetLogger hook, like other feature/* packages. The
logging identity now comes from LocalBackend's current netmap via the
widened NetLogSource interface (replacing Engine.SetNetLogNodeSource),
so nmcfg no longer parses audit log IDs into the config. The engine
still calls the hook before its ErrNoChanges return and before
router.Set (to capture initial packets), and again after router.Set
(to capture final packets), preserving the previous ordering.
Core wgengine no longer imports wgengine/netlog, so minimal builds
drop it entirely. tailscaled keeps netlog via feature/condregister,
and tsnet imports feature/condregister/netlog explicitly to keep
netlog enabled by default in tsnet-based binaries (tsidp,
k8s-operator).
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Updates #12614
Change-Id: I41ca7dfe43c51e977c41b5f8e934bd1f0e6e6e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Nothing uses them. DNS and MTU are handled elsewhere.
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Change-Id: I2ec8ae38dc6cce08bcc44e6c1f9177311202af89
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Replace the UAPI text protocol-based wireguard configuration with
wireguard-go's new direct callback API (SetPeerLookupFunc,
SetPeerByIPPacketFunc, RemoveMatchingPeers, SetPrivateKey).
Instead of computing a trimmed wireguard config ahead of time upon
control plane updates and pushing it via UAPI, install callbacks so
wireguard-go creates peers on demand when packets arrive. This removes
all the LazyWG trimming machinery: idle peer tracking, activity maps,
noteRecvActivity callbacks, the KeepFullWGConfig control knob, and the
ts_omit_lazywg build tag.
For incoming packets, PeerLookupFunc answers wireguard-go's questions
about unknown public keys by looking up the peer in the full config.
For outgoing packets, PeerByIPPacketFunc (installed from
LocalBackend.lookupPeerByIP) maps destination IPs to node public keys
using the existing nodeByAddr index.
Updates tailscale/corp#12345
Change-Id: I4cba80979ac49a1231d00a01fdba5f0c2af95dd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
Saves 45 KB from the min build, no longer pulling in deephash or
util/hashx, both with unsafe code.
It can actually be more efficient to not use deephash, as you don't
have to walk all bytes of all fields recursively to answer that two
things are not equal. Instead, you can just return false at the first
difference you see. And then with views (as we use ~everywhere
nowadays), the cloning the old value isn't expensive, as it's just a
pointer under the hood.
Updates #12614
Change-Id: I7b08616b8a09b3ade454bb5e0ac5672086fe8aec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Will Norris