This commit modifies the kubernetes operator to use the `tailscale-client-go-v2`
package instead of the internal tailscale client it was previously using. This
now gives us the ability to expand out custom resources and features as they
become available via the API module.
The tailnet reconciler has also been modified to manage clients as tailnets
are created and removed, providing each subsequent reconciler with a single
`ClientProvider` that obtains a tailscale client for the respective tailnet
by name, or the operator's default when presented with a blank string.
Fixes: https://github.com/tailscale/corp/issues/38418
Signed-off-by: David Bond <davidsbond93@gmail.com>
Adds logic for containerboot to signal that it can't auth, so the
operator can reissue a new auth key. This only applies when running with
a config file and with a kube state store.
If the operator sees reissue_authkey in a state Secret, it will create a
new auth key iff the config has no auth key or its auth key matches the
value of reissue_authkey from the state Secret. This is to ensure we
don't reissue auth keys in a tight loop if the proxy is slow to start or
failing for some other reason. The reissue logic also uses a burstable
rate limiter to ensure there's no way a terminally misconfigured
or buggy operator can automatically generate new auth keys in a tight loop.
Additional implementation details (ChaosInTheCRD):
- Added `ipn.NotifyInitialHealthState` to ipn watcher, to ensure that
`n.Health` is populated when notify's are returned.
- on auth failure, containerboot:
- Disconnects from control server
- Sets reissue_authkey marker in state Secret with the failing key
- Polls config file for new auth key (10 minute timeout)
- Restarts after receiving new key to apply it
- modified operator's reissue logic slightly:
- Deletes old device from tailnet before creating new key
- Rate limiting: 1 key per 30s with initial burst equal to replica count
- In-flight tracking (authKeyReissuing map) prevents duplicate API calls
across reconcile loops
Updates #14080
Change-Id: I6982f8e741932a6891f2f48a2936f7f6a455317f
(cherry picked from commit 969927c47c3d4de05e90f5b26a6d8d931c5ceed4)
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
* cmd/k8s-operator: use correct tailnet client for L7 & L3 ingresses
This commit fixes a bug when using multi-tailnet within the operator
to spin up L7 & L3 ingresses where the client used to create the
tailscale services was not switching depending on the tailnet used
by the proxygroup backing the service/ingress.
Updates: https://github.com/tailscale/corp/issues/34561
Signed-off-by: David Bond <davidsbond93@gmail.com>
* cmd/k8s-operator: adding server url to proxygroups when a custom tailnet has been specified
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
(cherry picked from commit 3b21ac5504e713e32dfcd43d9ee21e7e712ac200)
---------
Signed-off-by: David Bond <davidsbond93@gmail.com>
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/containerboot,kube/services: support the ability to automatically advertise services on startup
Updates #17769
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* cmd/containerboot: don't assume we want to use kube state store if in kubernetes
Fixes#8188
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This commit contains the implementation of multi-tailnet support within the Kubernetes Operator
Each of our custom resources now expose the `spec.tailnet` field. This field is a string that must match the name of an existing `Tailnet` resource. A `Tailnet` resource looks like this:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Tailnet
metadata:
name: example # This is the name that must be referenced by other resources
spec:
credentials:
secretName: example-oauth
```
Each `Tailnet` references a `Secret` resource that contains a set of oauth credentials. This secret must be created in the same namespace as the operator:
```yaml
apiVersion: v1
kind: Secret
metadata:
name: example-oauth # This is the name that's referenced by the Tailnet resource.
namespace: tailscale
stringData:
client_id: "client-id"
client_secret: "client-secret"
```
When created, the operator performs a basic check that the oauth client has access to all required scopes. This is done using read actions on devices, keys & services. While this doesn't capture a missing "write" permission, it catches completely missing permissions. Once this check passes, the `Tailnet` moves into a ready state and can be referenced. Attempting to use a `Tailnet` in a non-ready state will stall the deployment of `Connector`s, `ProxyGroup`s and `Recorder`s until the `Tailnet` becomes ready.
The `spec.tailnet` field informs the operator that a `Connector`, `ProxyGroup`, or `Recorder` must be given an auth key generated using the specified oauth client. For backwards compatibility, the set of credentials the operator is configured with are considered the default. That is, where `spec.tailnet` is not set, the resource will be deployed in the same tailnet as the operator.
Updates https://github.com/tailscale/corp/issues/34561
In dynamically changing environments where ACME account keys and certs
are stored separately, it can happen that the account key would get
deleted (and recreated) between issuances. If that is the case,
we currently fail renewals and the only way to recover is for users
to delete certs.
This adds a config knob to allow opting out of the replaces extension
and utilizes it in the Kubernetes operator where there are known
user workflows that could end up with this edge case.
Updates #18251
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator: add support for taiscale.com/http-redirect
The k8s-operator now supports a tailscale.com/http-redirect annotation
on Ingress resources. When enabled, this automatically creates port 80
handlers that automatically redirect to the equivalent HTTPS location.
Fixes#11252
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
* Fix for permanent redirect
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
* lint
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
* warn for redirect+endpoint
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
* tests
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
---------
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
DNS configuration support to ProxyClass, allowing users to customize DNS resolution for Tailscale proxy pods.
Fixes#16886
Signed-off-by: Raj Singh <raj@tailscale.com>
This commit modifies the k8s operator to wrap its logger using the logtail
logger provided via the tsnet server. This causes any logs written by
the operator to make their way to Tailscale in the same fashion as
wireguard logs to be used by support.
This functionality can also be opted-out of entirely using the
"TS_NO_LOGS_NO_SUPPORT" environment variable.
Updates https://github.com/tailscale/corp/issues/32037
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit adds a `replicas` field to the `Connector` custom resource that
allows users to specify the number of desired replicas deployed for their
connectors.
This allows users to deploy exit nodes, subnet routers and app connectors
in a highly available fashion.
Fixes#14020
Signed-off-by: David Bond <davidsbond93@gmail.com>
* cmd/k8s-operator,k8s-operator: allow setting a `priorityClassName`
Fixes#16682
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
* Update k8s-operator/apis/v1alpha1/types_proxyclass.go
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: Lee Briggs <jaxxstorm@users.noreply.github.com>
* run make kube-generate-all
Change-Id: I5f8f16694fdc181b048217b9f05ec2ee2aa04def
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
---------
Signed-off-by: Lee Briggs <lee@leebriggs.co.uk>
Signed-off-by: Lee Briggs <jaxxstorm@users.noreply.github.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the operator to detect the usage of k8s-apiserver
type proxy groups that wish to use the letsencrypt staging directory and
apply the appropriate environment variable to the statefulset it
produces.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the kubernetes operator to allow for customisation of the tailscale
login url. This provides some data locality for people that want to configure it.
This value is set in the `loginServer` helm value and is propagated down to all resources
managed by the operator. The only exception to this is recorder nodes, where additional
changes are required to support modifying the url.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
* cmd/k8s-operator: ProxyClass annotation for Services and Ingresses
Previously, the ProxyClass could only be configured for Services and
Ingresses via a Label. This adds the ability to set it via an
Annotation, but prioritizes the Label if both a Label and Annotation are
set.
Updates #14323
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* Update cmd/k8s-operator/operator.go
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: Tom Meadows <tom@tmlabs.co.uk>
* Update cmd/k8s-operator/operator.go
Signed-off-by: Tom Meadows <tom@tmlabs.co.uk>
* cmd/k8s-operator: ProxyClass annotation for Services and Ingresses
Previously, the ProxyClass could only be configured for Services and
Ingresses via a Label. This adds the ability to set it via an
Annotation, but prioritizes the Label if both a Label and Annotation are
set.
Updates #14323
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Signed-off-by: Tom Meadows <tom@tmlabs.co.uk>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Previously, the operator checked the ProxyGroup status fields for
information on how many of the proxies had successfully authed. Use
their state Secrets instead as a more reliable source of truth.
containerboot has written device_fqdn and device_ips keys to the
state Secret since inception, and pod_uid since 1.78.0, so there's
no need to use the API for that data. Read it from the state Secret
for consistency. However, to ensure we don't read data from a
previous run of containerboot, make sure we reset containerboot's
state keys on startup.
One other knock-on effect of that is ProxyGroups can briefly be
marked not Ready while a Pod is restarting. Introduce a new
ProxyGroupAvailable condition to more accurately reflect
when downstream controllers can implement flows that rely on a
ProxyGroup having at least 1 proxy Pod running.
Fixes#16327
Change-Id: I026c18e9d23e87109a471a87b8e4fb6271716a66
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Proxies know how to reload configfile on changes since 1.80, which
is going to be the earliest supported proxy version with 1.84 operator,
so remove the mechanism that was updating configfile hash to force
proxy Pod restarts on config changes.
Updates #13032
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds Recorder fields to configure the name and annotations of the ServiceAccount
created for and used by its associated StatefulSet. This allows the created Pod
to authenticate with AWS without requiring a Secret with static credentials,
using AWS' IAM Roles for Service Accounts feature, documented here:
https://docs.aws.amazon.com/eks/latest/userguide/iam-roles-for-service-accounts.htmlFixes#15875
Change-Id: Ib0e15c0dbc357efa4be260e9ae5077bacdcb264f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Fixes the configfile reload logic- if the tailscale capver can not
yet be determined because the device info is not yet written to the
state Secret, don't assume that the proxy is pre-110.
Updates tailscale/tailscale#13032
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{containerboot,k8s-operator},kube: add preshutdown hook for egress PG proxies
This change is part of work towards minimizing downtime during update
rollouts of egress ProxyGroup replicas.
This change:
- updates the containerboot health check logic to return Pod IP in headers,
if set
- always runs the health check for egress PG proxies
- updates ClusterIP Services created for PG egress endpoints to include
the health check endpoint
- implements preshutdown endpoint in proxies. The preshutdown endpoint
logic waits till, for all currently configured egress services, the ClusterIP
Service health check endpoint is no longer returned by the shutting-down Pod
(by looking at the new Pod IP header).
- ensures that kubelet is configured to call the preshutdown endpoint
This reduces the possibility that, as replicas are terminated during an update,
a replica gets terminated to which cluster traffic is still being routed via
the ClusterIP Service because kube proxy has not yet updated routig rules.
This is not a perfect check as in practice, it only checks that the kube
proxy on the node on which the proxy runs has updated rules. However, overall
this might be good enough.
The preshutdown logic is disabled if users have configured a custom health check
port via TS_LOCAL_ADDR_PORT env var. This change throws a warnign if so and in
future setting of that env var for operator proxies might be disallowed (as users
shouldn't need to configure this for a Pod directly).
This is backwards compatible with earlier proxy versions.
Updates tailscale/tailscale#14326
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: add logic to parse L7 Ingresses in HA mode
- Wrap the Tailscale API client used by the Kubernetes Operator
into a client that knows how to manage VIPServices.
- Create/Delete VIPServices and update serve config for L7 Ingresses
for ProxyGroup.
- Ensure that ingress ProxyGroup proxies mount serve config from a shared ConfigMap.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{k8s-operator,containerboot}: reload tailscaled configfile when its contents have changed
Instead of restarting the Kubernetes Operator proxies each time
tailscaled config has changed, this dynamically reloads the configfile
using the new reload endpoint.
Older annotation based mechanism will be supported till 1.84
to ensure that proxy versions prior to 1.80 keep working with
operator 1.80 and newer.
Updates tailscale/tailscale#13032
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: allow users to set custom labels for the optional ServiceMonitor
Updates tailscale/tailscale#14381
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,kube/kubetypes,cmd/k8s-operator: detect if Ingress is created in a tailnet that has no HTTPS
This attempts to make Kubernetes Operator L7 Ingress setup failures more explicit:
- the Ingress resource now only advertises HTTPS endpoint via status.ingress.loadBalancer.hostname when/if the proxy has succesfully loaded serve config
- the proxy attempts to catch cases where HTTPS is disabled for the tailnet and logs a warning
Updates tailscale/tailscale#12079
Updates tailscale/tailscale#10407
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator,go.mod: optionally create ServiceMonitor
Adds a new spec.metrics.serviceMonitor field to ProxyClass.
If that's set to true (and metrics are enabled), the operator
will create a Prometheus ServiceMonitor for each proxy to which
the ProxyClass applies.
Additionally, create a metrics Service for each proxy that has
metrics enabled.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot: serve health on local endpoint
We introduced stable (user) metrics in #14035, and `TS_LOCAL_ADDR_PORT`
with it. Rather than requiring users to specify a new addr/port
combination for each new local endpoint they want the container to
serve, this combines the health check endpoint onto the local addr/port
used by metrics if `TS_ENABLE_HEALTH_CHECK` is used instead of
`TS_HEALTHCHECK_ADDR_PORT`.
`TS_LOCAL_ADDR_PORT` now defaults to binding to all interfaces on 9002
so that it works more seamlessly and with less configuration in
environments other than Kubernetes, where the operator always overrides
the default anyway. In particular, listening on localhost would not be
accessible from outside the container, and many scripted container
environments do not know the IP address of the container before it's
started. Listening on all interfaces allows users to just set one env
var (`TS_ENABLE_METRICS` or `TS_ENABLE_HEALTH_CHECK`) to get a fully
functioning local endpoint they can query from outside the container.
Updates #14035, #12898
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
containerboot:
Adds 3 new environment variables for containerboot, `TS_LOCAL_ADDR_PORT` (default
`"${POD_IP}:9002"`), `TS_METRICS_ENABLED` (default `false`), and `TS_DEBUG_ADDR_PORT`
(default `""`), to configure metrics and debug endpoints. In a follow-up PR, the
health check endpoint will be updated to use the `TS_LOCAL_ADDR_PORT` if
`TS_HEALTHCHECK_ADDR_PORT` hasn't been set.
Users previously only had access to internal debug metrics (which are unstable
and not recommended) via passing the `--debug` flag to tailscaled, but can now
set `TS_METRICS_ENABLED=true` to expose the stable metrics documented at
https://tailscale.com/kb/1482/client-metrics at `/metrics` on the addr/port
specified by `TS_LOCAL_ADDR_PORT`.
Users can also now configure a debug endpoint more directly via the
`TS_DEBUG_ADDR_PORT` environment variable. This is not recommended for production
use, but exposes an internal set of debug metrics and pprof endpoints.
operator:
The `ProxyClass` CRD's `.spec.metrics.enable` field now enables serving the
stable user metrics documented at https://tailscale.com/kb/1482/client-metrics
at `/metrics` on the same "metrics" container port that debug metrics were
previously served on. To smooth the transition for anyone relying on the way the
operator previously consumed this field, we also _temporarily_ serve tailscaled's
internal debug metrics on the same `/debug/metrics` path as before, until 1.82.0
when debug metrics will be turned off by default even if `.spec.metrics.enable`
is set. At that point, anyone who wishes to continue using the internal debug
metrics (not recommended) will need to set the new `ProxyClass` field
`.spec.statefulSet.pod.tailscaleContainer.debug.enable`.
Users who wish to opt out of the transitional behaviour, where enabling
`.spec.metrics.enable` also enables debug metrics, can set
`.spec.statefulSet.pod.tailscaleContainer.debug.enable` to false (recommended).
Separately but related, the operator will no longer specify a host port for the
"metrics" container port definition. This caused scheduling conflicts when k8s
needs to schedule more than one proxy per node, and was not necessary for allowing
the pod's port to be exposed to prometheus scrapers.
Updates #11292
---------
Co-authored-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Now when we have HA for egress proxies, it makes sense to support topology
spread constraints that would allow users to define more complex
topologies of how proxy Pods need to be deployed in relation with other
Pods/across regions etc.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler that reconciles ExternalName Services that define a
tailnet target that should be exposed to cluster workloads on a ProxyGroup's
proxies.
The reconciler ensures that for each such service, the config mounted to
the proxies is updated with the tailnet target definition and that
and EndpointSlice and ClusterIP Service are created for the service.
Adds a new reconciler that ensures that as proxy Pods become ready to route
traffic to a tailnet target, the EndpointSlice for the target is updated
with the Pods' endpoints.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The operator creates a non-reusable auth key for each of
the cluster proxies that it creates and puts in the tailscaled
configfile mounted to the proxies.
The proxies are always tagged, and their state is persisted
in a Kubernetes Secret, so their node keys are expected to never
be regenerated, so that they don't need to re-auth.
Some tailnet configurations however have seen issues where the auth
keys being left in the tailscaled configfile cause the proxies
to end up in unauthorized state after a restart at a later point
in time.
Currently, we have not found a way to reproduce this issue,
however this commit removes the auth key from the config once
the proxy can be assumed to have logged in.
If an existing, logged-in proxy is upgraded to this version,
its redundant auth key will be removed from the conffile.
If an existing, logged-in proxy is downgraded from this version
to a previous version, it will work as before without re-issuing key
as the previous code did not enforce that a key must be present.
Updates tailscale/tailscale#13451
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Rename kube/{types,client,api} -> kube/{kubetypes,kubeclient,kubeapi}
so that we don't need to rename the package on each import to
convey that it's kubernetes specific.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Further split kube package into kube/{client,api,types}. This is so that
consumers who only need constants/static types don't have to import
the client and api bits.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/containerboot: store device ID before setting up proxy routes.
For containerboot instances whose state needs to be stored
in a Kubernetes Secret, we additonally store the device's
ID, FQDN and IPs.
This is used, between other, by the Kubernetes operator,
who uses the ID to delete the device when resources need
cleaning up and writes the FQDN and IPs on various kube
resource statuses for visibility.
This change shifts storing device ID earlier in the proxy setup flow,
to ensure that if proxy routing setup fails,
the device can still be deleted.
Updates tailscale/tailscale#12146
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* code review feedback
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add a new .spec.tailscale.acceptRoutes field to ProxyClass,
that can be optionally set to true for the proxies to
accept routes advertized by other nodes on tailnet (equivalent of
setting --accept-routes to true).
Updates tailscale/tailscale#12322,tailscale/tailscale#10684
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
David Bond
Tom Proctor
Brad Fitzpatrick
Tom Meadows
Will Norris
Irbe Krumina
Fernando Serboncini
Raj Singh
Lee Briggs