This commit modifies the kubernetes operator to use the `tailscale-client-go-v2`
package instead of the internal tailscale client it was previously using. This
now gives us the ability to expand out custom resources and features as they
become available via the API module.
The tailnet reconciler has also been modified to manage clients as tailnets
are created and removed, providing each subsequent reconciler with a single
`ClientProvider` that obtains a tailscale client for the respective tailnet
by name, or the operator's default when presented with a blank string.
Fixes: https://github.com/tailscale/corp/issues/38418
Signed-off-by: David Bond <davidsbond93@gmail.com>
Adds logic for containerboot to signal that it can't auth, so the
operator can reissue a new auth key. This only applies when running with
a config file and with a kube state store.
If the operator sees reissue_authkey in a state Secret, it will create a
new auth key iff the config has no auth key or its auth key matches the
value of reissue_authkey from the state Secret. This is to ensure we
don't reissue auth keys in a tight loop if the proxy is slow to start or
failing for some other reason. The reissue logic also uses a burstable
rate limiter to ensure there's no way a terminally misconfigured
or buggy operator can automatically generate new auth keys in a tight loop.
Additional implementation details (ChaosInTheCRD):
- Added `ipn.NotifyInitialHealthState` to ipn watcher, to ensure that
`n.Health` is populated when notify's are returned.
- on auth failure, containerboot:
- Disconnects from control server
- Sets reissue_authkey marker in state Secret with the failing key
- Polls config file for new auth key (10 minute timeout)
- Restarts after receiving new key to apply it
- modified operator's reissue logic slightly:
- Deletes old device from tailnet before creating new key
- Rate limiting: 1 key per 30s with initial burst equal to replica count
- In-flight tracking (authKeyReissuing map) prevents duplicate API calls
across reconcile loops
Updates #14080
Change-Id: I6982f8e741932a6891f2f48a2936f7f6a455317f
(cherry picked from commit 969927c47c3d4de05e90f5b26a6d8d931c5ceed4)
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
Single letter 'l' variables can eventually become confusing when
they're rendered in some fonts that make them similar to 1 or I.
Updates #cleanup
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
* Modifies the k8s-proxy to expose health check and metrics
endpoints on the Pod's IP.
* Moves cmd/containerboot/healthz.go and cmd/containerboot/metrics.go to
/kube to be shared with /k8s-proxy.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
Updates k8s-proxy's config so its auth mode config matches that we set
in kube-apiserver ProxyGroups for consistency.
Updates #13358
Change-Id: I95e29cec6ded2dc7c6d2d03f968a25c822bc0e01
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler for ProxyGroups of type kube-apiserver that will
provision a Tailscale Service for each replica to advertise. Adds two
new condition types to the ProxyGroup, TailscaleServiceValid and
TailscaleServiceConfigured, to post updates on the state of that
reconciler in a way that's consistent with the service-pg reconciler.
The created Tailscale Service name is configurable via a new ProxyGroup
field spec.kubeAPISserver.ServiceName, which expects a string of the
form "svc:<dns-label>".
Lots of supporting changes were needed to implement this in a way that's
consistent with other operator workflows, including:
* Pulled containerboot's ensureServicesUnadvertised and certManager into
kube/ libraries to be shared with k8s-proxy. Use those in k8s-proxy to
aid Service cert sharing between replicas and graceful Service shutdown.
* For certManager, add an initial wait to the cert loop to wait until
the domain appears in the devices's netmap to avoid a guaranteed error
on the first issue attempt when it's quick to start.
* Made several methods in ingress-for-pg.go and svc-for-pg.go into
functions to share with the new reconciler
* Added a Resource struct to the owner refs stored in Tailscale Service
annotations to be able to distinguish between Ingress- and ProxyGroup-
based Services that need cleaning up in the Tailscale API.
* Added a ListVIPServices method to the internal tailscale client to aid
cleaning up orphaned Services
* Support for reading config from a kube Secret, and partial support for
config reloading, to prevent us having to force Pod restarts when
config changes.
* Fixed up the zap logger so it's possible to set debug log level.
Updates #13358
Change-Id: Ia9607441157dd91fb9b6ecbc318eecbef446e116
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The observed generation was set to always 0 in #16429, but this had the
knock-on effect of other controllers considering ProxyGroups never ready
because the observed generation is never up to date in
proxyGroupCondition. Make sure the ProxyGroupAvailable function does not
requires the observed generation to be up to date, and add testing
coverage to catch regressions.
Updates #16327
Change-Id: I42f50ad47dd81cc2d3c3ce2cd7b252160bb58e40
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Refactors setting status into its own top-level function to make it
easier to ensure we _always_ set the status if it's changed on every
reconcile. Previously, it was possible to have stale status if some
earlier part of the provision logic failed.
Updates #16327
Change-Id: Idab0cfc15ae426cf6914a82f0d37a5cc7845236b
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Previously, the operator checked the ProxyGroup status fields for
information on how many of the proxies had successfully authed. Use
their state Secrets instead as a more reliable source of truth.
containerboot has written device_fqdn and device_ips keys to the
state Secret since inception, and pod_uid since 1.78.0, so there's
no need to use the API for that data. Read it from the state Secret
for consistency. However, to ensure we don't read data from a
previous run of containerboot, make sure we reset containerboot's
state keys on startup.
One other knock-on effect of that is ProxyGroups can briefly be
marked not Ready while a Pod is restarting. Introduce a new
ProxyGroupAvailable condition to more accurately reflect
when downstream controllers can implement flows that rely on a
ProxyGroup having at least 1 proxy Pod running.
Fixes#16327
Change-Id: I026c18e9d23e87109a471a87b8e4fb6271716a66
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Proxies know how to reload configfile on changes since 1.80, which
is going to be the earliest supported proxy version with 1.84 operator,
so remove the mechanism that was updating configfile hash to force
proxy Pod restarts on config changes.
Updates #13032
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
There was a flaky failure case where renaming a TLS hostname for an
ingress might leave the old hostname dangling in tailscaled config. This
happened when the proxygroup reconciler loop had an outdated resource
version of the config Secret in its cache after the
ingress-pg-reconciler loop had very recently written it to delete the
old hostname. As the proxygroup reconciler then did a patch, there was
no conflict and it reinstated the old hostname.
This commit updates the patch to an update operation so that if the
resource version is out of date it will fail with an optimistic lock
error. It also checks for equality to reduce the likelihood that we make
the update API call in the first place, because most of the time the
proxygroup reconciler is not even making an update to the Secret in the
case that the hostname has changed.
Updates tailscale/corp#24795
Change-Id: Ie23a97440063976c9a8475d24ab18253e1f89050
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Now that packets flow for VIPServices, the last piece needed to start
serving them from a ProxyGroup is config to tell the proxy Pods which
services they should advertise.
Updates tailscale/corp#24795
Change-Id: Ic7bbeac8e93c9503558107bc5f6123be02a84c77
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/{containerboot,k8s-operator},kube: add preshutdown hook for egress PG proxies
This change is part of work towards minimizing downtime during update
rollouts of egress ProxyGroup replicas.
This change:
- updates the containerboot health check logic to return Pod IP in headers,
if set
- always runs the health check for egress PG proxies
- updates ClusterIP Services created for PG egress endpoints to include
the health check endpoint
- implements preshutdown endpoint in proxies. The preshutdown endpoint
logic waits till, for all currently configured egress services, the ClusterIP
Service health check endpoint is no longer returned by the shutting-down Pod
(by looking at the new Pod IP header).
- ensures that kubelet is configured to call the preshutdown endpoint
This reduces the possibility that, as replicas are terminated during an update,
a replica gets terminated to which cluster traffic is still being routed via
the ClusterIP Service because kube proxy has not yet updated routig rules.
This is not a perfect check as in practice, it only checks that the kube
proxy on the node on which the proxy runs has updated rules. However, overall
this might be good enough.
The preshutdown logic is disabled if users have configured a custom health check
port via TS_LOCAL_ADDR_PORT env var. This change throws a warnign if so and in
future setting of that env var for operator proxies might be disallowed (as users
shouldn't need to configure this for a Pod directly).
This is backwards compatible with earlier proxy versions.
Updates tailscale/tailscale#14326
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: add logic to parse L7 Ingresses in HA mode
- Wrap the Tailscale API client used by the Kubernetes Operator
into a client that knows how to manage VIPServices.
- Create/Delete VIPServices and update serve config for L7 Ingresses
for ProxyGroup.
- Ensure that ingress ProxyGroup proxies mount serve config from a shared ConfigMap.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{k8s-operator,containerboot}: reload tailscaled configfile when its contents have changed
Instead of restarting the Kubernetes Operator proxies each time
tailscaled config has changed, this dynamically reloads the configfile
using the new reload endpoint.
Older annotation based mechanism will be supported till 1.84
to ensure that proxy versions prior to 1.80 keep working with
operator 1.80 and newer.
Updates tailscale/tailscale#13032
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: allow users to set custom labels for the optional ServiceMonitor
Updates tailscale/tailscale#14381
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Currently this does not yet do anything apart from creating
the ProxyGroup resources like StatefulSet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator,go.mod: optionally create ServiceMonitor
Adds a new spec.metrics.serviceMonitor field to ProxyClass.
If that's set to true (and metrics are enabled), the operator
will create a Prometheus ServiceMonitor for each proxy to which
the ProxyClass applies.
Additionally, create a metrics Service for each proxy that has
metrics enabled.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We currently annotate pods with a hash of the tailscaled config so that
we can trigger pod restarts whenever it changes. However, the hash
updates more frequently than is necessary causing more restarts than is
necessary. This commit removes two causes; scaling up/down and removing
the auth key after pods have initially authed to control. However, note
that pods will still restart on scale-up/down because of the updated set
of volumes mounted into each pod. Hopefully we can fix that in a planned
follow-up PR.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
As discussed in #13684, base the ProxyGroup's proxy definitions on the same
scaffolding as the existing proxies, as defined in proxy.yaml
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The default ProxyClass can be set via helm chart or env var, and applies
to all proxies that do not otherwise have an explicit ProxyClass set.
This ensures proxies created by the new ProxyGroup CRD are consistent
with the behaviour of existing proxies
Nearby but unrelated changes:
* Fix up double error logs (controller runtime logs returned errors)
* Fix a couple of variable names
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
David Bond
Tom Proctor
Brad Fitzpatrick
Will Norris
Fernando Serboncini
Tom Meadows
Irbe Krumina