1eaad7d3de regressed some tests in another repo that were starting up
a control server on `http://127.0.0.1:nnn`. Because there was no https
running, and because of a bug in 1eaad7d3de (which ended up checking
the recently-dialed-control check twice in a single dial call), we
ended up forcing only the use of TLS dials in a test that only had
plaintext HTTP running.
Instead, plumb down support for explicitly disabling TLS fallbacks and
use it only when running in a test and using `http` scheme control
plane URLs to 127.0.0.1 or localhost.
This fixes the tests elsewhere.
Updates #13597
Change-Id: I97212ded21daf0bd510891a278078daec3eebaa6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reproduces the bug report from
https://github.com/tailscale/tailscale/issues/13346
It does not yet fix it.
Updates #13346
Change-Id: Ia5af7b0481a64a37efe259c798facdda6d9da618
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the TS_DEBUG_NETSTACK_LOOPBACK_PORT environment variable is set,
netstack will loop back (dnat to addressFamilyLoopback:loopbackPort)
TCP & UDP flows originally destined to localServicesIP:loopbackPort.
localServicesIP is quad-100 or the IPv6 equivalent.
Updates tailscale/corp#22713
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The reason they weren't working was because the cmd/tta agent in the
guest was dialing out to the test and the vnet couldn't map its global
unicast IPv6 address to a node as it was just using a
map[netip.Addr]*node and blindly trusting the *node was
populated. Instead, it was nil, so the agent connection fetching
didn't work for its RoundTripper and the test could never drive the
node. That map worked for IPv4 but for IPv6 we need to use the method
that takes into account the node's IPv6 SLAAC address. Most call sites
had been converted but I'd missed that one.
Also clean up some debug, and prohibit nodes' link-local unicast
addresses from dialing 2000::/3 directly for now. We can allow that to
be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's
called.) That mode was working on accident, but was confusing: Linux
would do source address selection from link local for the first few
seconds and then after SLAAC and DAD, switch to using the global
unicast source address. Be consistent for now and force it to use the
global unicast.
Updates #13038
Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... rather than abusing the generic tsapp.
Per discussion in https://github.com/gokrazy/gokrazy/pull/275
It also means we can remove stuff we don't need, like ntp or randomd.
Updates #13038
Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's too new to be supported in Debian bookworm so just remove it.
It doesn't seem to matter or help speed anything up.
Updates #13038
Change-Id: I39077ba8032bebecd75209552b88f1842c843c33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had a mix of 0-based and 1-based nodes and MACs in logs.
Updates #13038
Change-Id: I36d1b00f7f94b37b4ae2cd439bcdc5dbee6eda4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using https://github.com/gokrazy/gokrazy/pull/275
This is much lower latency than logcatcher, which is higher latency
and chunkier. And this is better than getting it via 'tailscale debug
daemon-logs', which misses early interesting logs.
Updates #13038
Change-Id: I499ec254c003a9494c0e9910f9c650c8ac44ef33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To test local connections.
Updates #13038
Change-Id: I575dcab31ca812edf7d04fa126772611cf89b9a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new NodeAgentClient type that can be used to
invoke the LocalAPI using the LocalClient instead of
handcrafted URLs. However, there are certain cases where
it does make sense for the node agent to provide more
functionality than whats possible with just the LocalClient,
as such it also exposes a http.Client to make requests directly.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a variant for Connect that takes in a context.Context
which allows passing through cancellation etc by the caller.
Updates tailscale/corp#18266
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were storing server-side lots of:
"Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""},
That was about 7% of our total storage of pending RegisterRequest
bodies.
Updates tailscale/corp#19327
Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have tstest/integration nowadays.
And this test was one of the lone holdouts using the to-be-nuked
SetControlClientGetterForTesting.
Updates #11649
Change-Id: Icf8a6a2e9b8ae1ac534754afa898c00dc0b7623b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Brad Fitzpatrick
Kristoffer Dalby
Andrew Dunham
Jordan Whited
Maisem Ali