This implements the same functionality as the former run.sh, but in Go
and with a little better awareness of tailscaled's lifecycle.
Also adds TS_AUTH_ONCE, which fixes the unfortunate behavior run.sh had
where it would unconditionally try to reauth every time if you gave it
an authkey, rather than try to use it only if auth is actually needed.
This makes it a bit nicer to deploy these containers in automation, since
you don't have to run the container once, then go and edit its definition
to remove authkeys.
Signed-off-by: David Anderson <danderson@tailscale.com>
Make netlogfmt useful regardless of the exact schema of the input.
If a JSON object looks like a network log message,
then unmarshal it as one and then print it.
This allows netlogfmt to support both a stream of JSON objects
directly serialized from netlogtype.Message, or the schema
returned by the /api/v2/tailnet/{{tailnet}}/network-logs API endpoint.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.
Avoid this problem by moving all network logging types to a single package.
We also update staticcheck to take in:
003d277bcf
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If the username includes a suffix of +password, then we accept
password auth and just let them in like it were no auth.
This exists purely for SSH clients that get confused by seeing success
to their initial auth type "none".
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I616d4c64d042449fb164f615012f3bae246e91ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
HTTP/2 server connections can hang forever waiting for a clean
shutdown that was preempted by a fatal error. This condition can
be exploited by a malicious client to cause a denial of service.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Due to improper path santization, RPMs containing relative file
paths can cause files to be written (or overwritten) outside of the
target directory.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Reduces the amount of boilerplate to render the UI and makes it easier to
respond to state changes (e.g. machine getting authorized, netmap changing,
etc.)
Preact adds ~13K to our bundle size (5K after Brotli) thus is a neglibible
size contribution. We mitigate the delay in rendering the UI by having a static
placeholder in the HTML.
Required bumping the esbuild version to pick up evanw/esbuild#2349, which
makes it easier to support Preact's JSX code generation.
Fixes#5137Fixes#5273
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds the inverse to CapabilityFileSharingSend so that senders can
identify who they can Taildrop to.
Updates #2101
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Runs a Tailscale client in the browser (via a WebAssembly build of the
wasm package) and allows SSH access to machines. The wasm package exports
a newIPN function, which returns a simple JS object with methods like
start(), login(), logout() and ssh(). The golang.org/x/crypto/ssh
package is used for the SSH client.
Terminal emulation and QR code renedring is done via NPM packages (xterm
and qrcode respectively), thus we also need a JS toolchain that can
install and bundle them. Yarn is used for installation, and esbuild
handles loading them and bundling for production serving.
Updates #3157
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is the first in a series of PRs implementing the internals for the
Tailnet Key Authority. This PR implements the AUM and Key types, which
are used by pretty much everything else. Future PRs:
- The State type & related machinery
- The Tailchonk (storage) type & implementation
- The Authority type and sync implementation
Signed-off-by: Tom DNetto <tom@tailscale.com>
And rewrite cloud detection to try to do only zero or one metadata
discovery request for all clouds, only doing a first (or second) as
confidence increases. Work remains for Windows, but a start.
And add Cloud to tailcfg.Hostinfo, which helped with testing using
"tailcfg debug hostinfo".
Updates #4983 (Linux only)
Updates #4984
Change-Id: Ib03337089122ce0cb38c34f724ba4b4812bc614e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This does three things:
* If you're on GCP, it adds a *.internal DNS split route to the
metadata server, so we never break GCP DNS names. This lets people
have some Tailscale nodes on GCP and some not (e.g. laptops at home)
without having to add a Tailnet-wide *.internal DNS route.
If you already have such a route, though, it won't overwrite it.
* If the 100.100.100.100 DNS forwarder has nowhere to forward to,
it forwards it to the GCP metadata IP, which forwards to 8.8.8.8.
This means there are never errNoUpstreams ("upstream nameservers not set")
errors on GCP due to e.g. mangled /etc/resolv.conf (GCP default VMs
don't have systemd-resolved, so it's likely a DNS supremacy fight)
* makes the DNS fallback mechanism use the GCP metadata IP as a
fallback before our hosted HTTP-based fallbacks
I created a default GCP VM from their web wizard. It has no
systemd-resolved.
I then made its /etc/resolv.conf be empty and deleted its GCP
hostnames in /etc/hosts.
I then logged in to a tailnet with no global DNS settings.
With this, tailscaled writes /etc/resolv.conf (direct mode, as no
systemd-resolved) and sets it to 100.100.100.100, which then has
regular DNS via the metadata IP and *.internal DNS via the metadata IP
as well. If the tailnet configures explicit DNS servers, those are used
instead, except for *.internal.
This also adds a new util/cloudenv package based on version/distro
where the cloud type is only detected once. We'll likely expand it in
the future for other clouds, doing variants of this change for other
popular cloud environments.
Fixes#4911
RELNOTES=Google Cloud DNS improvements
Change-Id: I19f3c2075983669b2b2c0f29a548da8de373c7cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise we crash at startup with Go 1.19beta1.
Updates #4872
Change-Id: I371df4146735f7e066efd2edd48c1a305906c13d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The hujson package transition to just being a pure AST
parser and formatter for HuJSON and not an unmarshaler.
Thus, parse HuJSON as such, convert it to JSON,
and then use the standard JSON unmarshaler.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
No CLI support yet. Just the curl'able version if you know the peerapi
port. (like via a TSMP ping)
Updates #306
Change-Id: I0662ba6530f7ab58d0ddb24e3664167fcd1c4bcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit 8d6793fd70.
Reason: breaks Android build (cgo/pthreads addition)
We can try again next cycle.
Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Attempt to load the xt_mark kernel module when it is not present. If the
load fails, log error information.
It may be tempting to promote this failure to an error once it has been
in use for some time, so as to avoid reaching an error with the iptables
invocation, however, there are conditions under which the two stages may
disagree - this change adds more useful breadcrumbs.
Example new output from tailscaled running under my WSL2:
```
router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2
```
Background:
There are two places to lookup modules, one is `/proc/modules` "old",
the other is `/sys/module/` "new".
There was query_modules(2) in linux <2.6, alas, it is gone.
In a docker container in the default configuration, you would get
/proc/modules and /sys/module/ both populated. lsmod may work file,
modprobe will fail with EPERM at `finit_module()` for an unpriviliged
container.
In a priviliged container the load may *succeed*, if some conditions are
met. This condition should be avoided, but the code landing in this
change does not attempt to avoid this scenario as it is both difficult
to detect, and has a very uncertain impact.
In an nspawn container `/proc/modules` is populated, but `/sys/module`
does not exist. Modern `lsmod` versions will fail to gather most module
information, without sysfs being populated with module information.
In WSL2 modules are likely missing, as the in-use kernel typically is
not provided by the distribution filesystem, and WSL does not mount in a
module filesystem of its own. Notably the WSL2 kernel supports iptables
marks without listing the xt_mark module in /sys/module, and
/proc/modules is empty.
On a recent kernel, we can ask the capabilities system about SYS_MODULE,
that will help to disambiguate between the non-privileged container case
and just being root. On older kernels these calls may fail.
Update #4329
Signed-off-by: James Tucker <james@tailscale.com>
We only use the termios subpackage, so we're unaffected by
CVE-2020-7665, but the bump will let dependabot return to slumber.
Fixes https://github.com/tailscale/tailscale/security/dependabot/2
Signed-off-by: James Tucker <james@tailscale.com>
This conforms to the NGINX subrequest result authentication protocol[1]
using the NGINX module `ngx_http_auth_request_module`. This is based on
the example that @peterkeen provided on Twitter[2], but with several
changes to make things more tightly locked down:
* This listens over a UNIX socket instead of a TCP socket to prevent
leakage to the network
* This uses systemd socket activation so that systemd owns the socket
and can then lock down the service to the bare minimum required to do
its job without having to worry about dropping permissions
* This provides additional information in HTTP response headers that can
be useful for integrating with various services
* This has a script to automagically create debian and redhat packages
for easier distribution
This will be written about on the Tailscale blog. There is more
information in README.md.
[1]: https://docs.nginx.com/nginx/admin-guide/security-controls/configuring-subrequest-authentication/
[2]: https://github.com/peterkeen/tailscale/blob/main/cmd/nginx-auth-proxy/nginx-auth-proxy.go
Signed-off-by: Xe Iaso <xe@tailscale.com>
This will enable me to land tests for the upcoming monitor change in
PR #4385.
Update #4385
Update #4282
Signed-off-by: James Tucker <james@tailscale.com>
In tracking down issue #4144 and reading through the netstack code in
detail, I discovered that the packet buf Clone path did not reset the
packetbuf it was getting from the sync.Pool. The fix was sent upstream
https://github.com/google/gvisor/pull/7385, and this bump pulls that in.
At this time there is no known path that this fixes, however at the time
of upstream submission this reset at least one field that could lead to
incorrect packet routing if exercised, a situation that could therefore
lead to an information leak.
Signed-off-by: James Tucker <james@tailscale.com>
While we rearrange/upstream things.
gliderlabs/ssh is forked into tempfork from our prior fork
at be8b7add40
x/crypto/ssh OTOH is forked at
https://github.com/tailscale/golang-x-crypto because it was gnarlier
to vendor with various internal packages, etc.
Its git history shows where it starts (2c7772ba30643b7a2026cbea938420dce7c6384d).
Updates #3802
Change-Id: I546e5cdf831cfc030a6c42557c0ad2c58766c65f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Primarily this is for f375784d83852b1e3ff20cc9de0648b3c0cf8525 and the
related commits that provide buffer pooling for the endpoint code paths
we use.
Signed-off-by: James Tucker <james@tailscale.com>
David Anderson
Brad Fitzpatrick
Joe Tsai
Maisem Ali
Florian Lehner
dependabot[bot]
Mihai Parparita
Xe Iaso
Tom DNetto
James Tucker
Matt Layher
Josh Bleecher Snyder