This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Don't append a trailing slash to a request path
to the reverse proxy that matches the mount point exactly.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Previously we would return the full error from Stat or Open, possibily exposing the full file path. This change will log the error and return the generic error message "an error occurred reading the file or directory".
Updates tailscale/corp#15485
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
return early if handler is nil. Go ahead and return the error from
handler, though in this case the caller isn't doing anything with it
(which has always been the case).
Updates #10177
Updates #10251
Signed-off-by: Will Norris <will@tailscale.com>
Tailscale serve maintains a set of listeners so that serve traffic from
the local device can be properly served when running in kernel
networking mode. #10177 refactored that logic so that it could be reused
by the internal web client as well. However, in my refactoring I missed
actually calling the serve handler to handle the traffic.
Updates #10177
Signed-off-by: Will Norris <will@tailscale.com>
The local web client has the same characteristic as tailscale serve, in
that it needs a local listener to allow for connections from the local
machine itself when running in kernel networking mode.
This change renames and adapts the existing serveListener to allow it to
be used by the web client as well.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This adds a check to prevent changes to ServeConfig if tailscaled
is run with a Locked config.
Missed in 1fc3573446.
Updates #1412
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when a userspace proxy config is reloaded,
connections for any removed proxies are safely closed
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Initiates http/h2c transport for userspace proxy
backend lazily and at most once.
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates userspace proxy to detect plaintext grpc requests
using the preconfigured host prefix and request's content
type header and ensure that these will be proxied over h2c.
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were eagerly doing a synchronous renewal of the cert while
trying to serve traffic. Instead of that, just do the cert
renewal in the background and continue serving traffic as long
as the cert is still valid.
This regressed in c1ecae13ab when
we introduced ARI support and were trying to make the experience
of `tailscale cert` better. However, that ended up regressing
the experience for tsnet as it would not always doing the renewal
synchronously.
Fixes#9783
Signed-off-by: Maisem Ali <maisem@tailscale.com>
These log paths were actually unexpected until the refactor in
fe95d81b43. This moves the logs
to the callsites where they are actually unexpected.
Fixes#9670
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR adds optimistic concurrency control in the local client and
api in order to ensure multiple writes of the ServeConfig do not
conflict with each other.
Updates #9273
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a new field to the ServeConfig which maps
WatchIPNBus session ids to foreground serve configs.
The PR also adds a DeleteForegroundSession method to ensure the config
gets cleaned up on sessions ending.
Note this field is not currently used but will be in follow up work.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
This PR addresses a number of the follow ups from PR #8491 that were written
after getting merged.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Adds ability to start Funnel in the foreground and stream incoming
connections. When foreground process is stopped, Funnel is turned
back off for the port.
Exampe usage:
```
TAILSCALE_FUNNEL_V2=on tailscale funnel 8080
```
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
While our `shouldStartDomainRenewal` check is correct, `getCertPEM`
would always bail if the existing cert is not expired. Add the same
`shouldStartDomainRenewal` check to `getCertPEM` to make it proceed with
renewal when existing certs are still valid but should be renewed.
The extra check is expensive (ARI request towards LetsEncrypt), so cache
the last check result for 1hr to not degrade `tailscale serve`
performance.
Also, asynchronous renewal is great for `tailscale serve` but confusing
for `tailscale cert`. Add an explicit flag to `GetCertPEM` to force a
synchronous renewal for `tailscale cert`.
Fixes#8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
Adds a `Tailscale-Headers-Info` header whenever the `Tailscale-User-`
headers are filled from the HTTP proxy handler.
Planning on hooking this shorturl up to KB docs about the header
values (i.e. what's a login name vs. display name) and security
considerations to keep in mind while using these headers - notibly
that they can also be filled from external requests that do not hit
tailscaled.
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds two new headers to HTTP serve proxy:
- `Tailscale-User-Login`: Filled with requester's login name.
- `Tailscale-User-Name`: Filled with requester's display name.
These headers only get filled when the SrcAddr is associated with
a non-tagged (i.e. user-owned) node within the client's Tailnet.
The headers are passed through empty when the request originated
from another tailnet, or the public internet (via funnel).
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The netstack code had a bunch of logic to figure out if the LocalBackend should handle an
incoming connection and then would call the function directly on LocalBackend. Move that
logic to LocalBackend and refactor the methods to return conn handlers.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
The reverse proxy was sending the ingressd IPv6 down as the
X-Forwarded-For. This update uses the actual remote addr.
Updates tailscale/corp#9914
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This change trims the mountPoint from the request URL path before
sending the request to the reverse proxy.
Today if you mount a proxy at `/foo` and request to
`/foo/bar/baz`, we leak the `mountPoint` `/foo` as part of the request
URL's path.
This fix makes removed the `mountPoint` prefix from the path so
proxied services receive requests as if they were running at the root
(`/`) path.
This could be an issue if the app generates URLs (in HTML or otherwise)
and assumes `/path`. In this case, those URLs will 404.
With that, I still think we should trim by default and not leak the
`mountPoint` (specific to Tailscale) into whatever app is hosted.
If it causes an issue with URL generation, I'd suggest looking at configuring
an app-specific path prefix or running Caddy as a more advanced
solution.
Fixes: #6571
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
Previously the part that handled Funnel connections was not
aware of any listeners that tsnet.Servers might have had open
so it would check against the ServeConfig and fail.
Adding a ServeConfig for a TCP proxy was also not suitable in this
scenario as that would mean creating two different listeners and have
one forward to the other, which really meant that you could not have
funnel and tailnet-only listeners on the same port.
This also introduces the ipn.FunnelConn as a way for users to identify
whether the call is coming over funnel or not. Currently it only holds
the underlying conn and the target as presented in the "Tailscale-Ingress-Target"
header.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
On macOS (AppStore and macsys), we need to bind to ""/all-interfaces
due to the network sandbox. Ideally we would only bind to the
Tailscale interface, but macOS errors out if we try to
to listen on privileged ports binding only to a specific
interface.
We also implement the lc.Control hook, same as we do for
peerapi. It doesn't solve our problem but it's better that
we do and would likely be required when Apple gets around to
fixing per-interface priviliged port binding.
Fixes: #6364
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
By default, `http.Transport` keeps idle connections open hoping to re-use them in the future. Combined with a separate transport per request in HTTP proxy this results in idle connection leak.
Fixes#6773
Brad Fitzpatrick
Charlotte Brandhorst-Satzkorn
Percy Wegmann
Irbe Krumina
Joe Tsai
Tyler Smalley
Will Norris
Maisem Ali
Marwan Sulaiman
Tyler Smalley
Sonia Appasamy
Andrew Lytvynov
shayne
Heiko Rothe
Mihai Parparita
Andrew Dunham
Anton Tolchanov